Why Linux fails to load/install direct to HDD, common reasons
1] Corrupt download [check SHA sum]
2] bad burn to installation medium [try again] [if you used Rufus then try Balena Etcher or Ventoy]
2A] if optical drive burn at slow speed [no more than x3]
3] Wind 8.2 and higher quick start/fast boot or secure boot not disabled [after disabling do a full power re-boot not a restart]
3A ] check that boot from USB/Optical drive is enabled in your BIOS?UEFI
4] defective pen-drive/DVD
5] hardware fault,
5A] If old style HDD run integrity check
5B]if SATA SSD check for hidden...
1] Corrupt download [check SHA sum]
2] bad burn to installation medium [try again] [if you used Rufus then try Balena Etcher or Ventoy]
2A] if optical drive burn at slow speed [no more than x3]
3] Wind 8.2 and higher quick start/fast boot or secure boot not disabled [after disabling do a full power re-boot not a restart]
3A ] check that boot from USB/Optical drive is enabled in your BIOS?UEFI
4] defective pen-drive/DVD
5] hardware fault,
5A] If old style HDD run integrity check
5B]if SATA SSD check for hidden...
- Brickwizard
- Replies: 2
- Forum: Getting Started

