smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.8-200.fc39.x86_64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke,
www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M8 (AF)
Device Model: SAMSUNG HN-M101MBB
Serial Number: C7101G14AAAG25
LU WWN Device Id: 5 0000f0 0aa0b25a0
Firmware Version: 2AR10001
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Jan 3 11:27:01 2024 -04
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13860) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 231) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 10
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 089 089 025 Pre-fail Always - 3470
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 66
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 148
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 20
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 51
181 Program_Fail_Cnt_Total 0x0022 100 100 000 Old_age Always - 23806
191 G-Sense_Error_Rate 0x0022 100 100 000 Old_age Always - 9
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 064 054 000 Old_age Always - 32 (Min/Max 24/46)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 189
223 Load_Retry_Count 0x0032 100 100 000 Old_age Always - 20
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 4581
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 129 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
The above only provides legacy SMART information - try 'smartctl -x' for more
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.8-200.fc39.x86_64] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke,
www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: SAMSUNG SpinPoint M8 (AF)
Device Model: SAMSUNG HN-M101MBB
Serial Number: C7101G14AAAG25
LU WWN Device Id: 5 0000f0 0aa0b25a0
Firmware Version: 2AR10001
User Capacity: 1.000.204.886.016 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database 7.3/5528
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Wed Jan 3 11:36:23 2024 -04
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 254
APM feature is: Disabled
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Unknown
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: Incomplete response, ATA output registers missing
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (13860) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 231) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 10
2 Throughput_Performance -OS--K 252 252 000 - 0
3 Spin_Up_Time PO---K 089 089 025 - 3470
4 Start_Stop_Count -O--CK 100 100 000 - 67
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
7 Seek_Error_Rate -OSR-K 252 252 051 - 0
8 Seek_Time_Performance --S--K 252 252 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 148
10 Spin_Retry_Count -O--CK 252 252 051 - 0
11 Calibration_Retry_Count -O--CK 100 100 000 - 20
12 Power_Cycle_Count -O--CK 100 100 000 - 51
181 Program_Fail_Cnt_Total -O---K 100 100 000 - 23806
191 G-Sense_Error_Rate -O---K 100 100 000 - 9
192 Power-Off_Retract_Count -O---K 252 252 000 - 0
194 Temperature_Celsius -O---- 064 054 000 - 32 (Min/Max 24/46)
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
197 Current_Pending_Sector -O--CK 252 252 000 - 0
198 Offline_Uncorrectable ----CK 252 252 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 189
223 Load_Retry_Count -O--CK 100 100 000 - 20
225 Load_Cycle_Count -O--CK 100 100 000 - 4584
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 129 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Completed [00% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 32 Celsius
Power Cycle Min/Max Temperature: 29/32 Celsius
Lifetime Min/Max Temperature: 24/58 Celsius
Specified Max Operating Temperature: 80 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 5 minutes
Temperature Logging Interval: 5 minutes
Min/Max recommended Temperature: -5/80 Celsius
Min/Max Temperature Limit: -10/85 Celsius
Temperature History Size (Index): 128 (31)
Index Estimated Time Temperature Celsius
32 2024-01-03 01:00 32 *************
33 2024-01-03 01:05 33 **************
34 2024-01-03 01:10 33 **************
35 2024-01-03 01:15 32 *************
... ..( 17 skipped). .. *************
53 2024-01-03 02:45 32 *************
54 2024-01-03 02:50 33 **************
... ..( 6 skipped). .. **************
61 2024-01-03 03:25 33 **************
62 2024-01-03 03:30 34 ***************
... ..( 2 skipped). .. ***************
65 2024-01-03 03:45 34 ***************
66 2024-01-03 03:50 33 **************
67 2024-01-03 03:55 33 **************
68 2024-01-03 04:00 34 ***************
69 2024-01-03 04:05 33 **************
... ..( 2 skipped). .. **************
72 2024-01-03 04:20 33 **************
73 2024-01-03 04:25 35 ****************
74 2024-01-03 04:30 35 ****************
75 2024-01-03 04:35 34 ***************
76 2024-01-03 04:40 35 ****************
77 2024-01-03 04:45 34 ***************
78 2024-01-03 04:50 34 ***************
79 2024-01-03 04:55 34 ***************
80 2024-01-03 05:00 33 **************
... ..( 9 skipped). .. **************
90 2024-01-03 05:50 33 **************
91 2024-01-03 05:55 34 ***************
... ..( 3 skipped). .. ***************
95 2024-01-03 06:15 34 ***************
96 2024-01-03 06:20 35 ****************
... ..( 3 skipped). .. ****************
100 2024-01-03 06:40 35 ****************
101 2024-01-03 06:45 36 *****************
102 2024-01-03 06:50 36 *****************
103 2024-01-03 06:55 36 *****************
104 2024-01-03 07:00 37 ******************
105 2024-01-03 07:05 36 *****************
... ..( 7 skipped). .. *****************
113 2024-01-03 07:45 36 *****************
114 2024-01-03 07:50 37 ******************
115 2024-01-03 07:55 36 *****************
116 2024-01-03 08:00 37 ******************
117 2024-01-03 08:05 37 ******************
118 2024-01-03 08:10 38 *******************
119 2024-01-03 08:15 38 *******************
120 2024-01-03 08:20 37 ******************
121 2024-01-03 08:25 38 *******************
... ..( 5 skipped). .. *******************
127 2024-01-03 08:55 38 *******************
0 2024-01-03 09:00 37 ******************
1 2024-01-03 09:05 37 ******************
2 2024-01-03 09:10 37 ******************
3 2024-01-03 09:15 38 *******************
4 2024-01-03 09:20 38 *******************
5 2024-01-03 09:25 37 ******************
6 2024-01-03 09:30 38 *******************
7 2024-01-03 09:35 38 *******************
8 2024-01-03 09:40 39 ********************
9 2024-01-03 09:45 38 *******************
10 2024-01-03 09:50 38 *******************
11 2024-01-03 09:55 37 ******************
12 2024-01-03 10:00 37 ******************
13 2024-01-03 10:05 38 *******************
14 2024-01-03 10:10 38 *******************
15 2024-01-03 10:15 39 ********************
16 2024-01-03 10:20 39 ********************
17 2024-01-03 10:25 39 ********************
18 2024-01-03 10:30 38 *******************
... ..( 3 skipped). .. *******************
22 2024-01-03 10:50 38 *******************
23 2024-01-03 10:55 37 ******************
... ..( 5 skipped). .. ******************
29 2024-01-03 11:25 37 ******************
30 2024-01-03 11:30 32 *************
31 2024-01-03 11:35 32 *************
SMART WRITE LOG does not return COUNT and LBA_LOW register
SCT (Get) Error Recovery Control command failed
Device Statistics (GP/SMART Log 0x04) not supported
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 3 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00 4 0 Vendor specific
0x8e01 4 0 Vendor specific
0x8e02 4 0 Vendor specific
0x8e03 4 0 Vendor specific
0x8e04 4 0 Vendor specific
0x8e05 4 0 Vendor specific
0x8e06 4 0 Vendor specific
0x8e07 4 0 Vendor specific
0x8e08 4 0 Vendor specific
0x8e09 4 0 Vendor specific
0x8e0a 4 0 Vendor specific
0x8e0b 4 0 Vendor specific
0x8e0c 4 0 Vendor specific
0x8e0d 4 0 Vendor specific
0x8e0e 4 0 Vendor specific
0x8e0f 4 0 Vendor specific
0x8e10 4 0 Vendor specific
0x8e11 4 0 Vendor specific