Chromebook *buntu Issues

[blackneos940]

First, let me get this out of the way:

It's a list of my Hardware in this Acer C720 Chromebook

chrubuntu
description: Desktop Computer
product: Peppy ()
vendor: Acer
version: 1.0
serial: 123456789
width: 64 bits
capabilities: smbios-2.7 dmi-2.7 ldt16 vsyscall32
configuration: boot=normal chassis=desktop
*-core
description: Motherboard
physical id: 0
*-firmware
description: BIOS
vendor: coreboot
physical id: 0
date: 04/30/2014
size: 1MiB
capacity: 8128KiB
capabilities: pci pcmcia upgrade bootselect acpi
*-cpu:0 DISABLED
description: CPU [empty]
product: Pentium Pro
vendor: GenuineIntel
physical id: 3
version: Intel(R) Celeron(R) 2955U @ 1.40GHz
configuration: cores=16
*-memory
description: System memory
physical id: 1
size: 1875MiB
*-cpu:1
product: Intel(R) Celeron(R) 2955U @ 1.40GHz
vendor: Intel Corp.
physical id: 2
bus info: cpu@0
size: 1400MHz
capacity: 1400MHz
width: 64 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf eagerfpu pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 movbe popcnt tsc_deadline_timer xsave rdrand lahf_lm abm arat epb xsaveopt pln pts dtherm tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust erms invpcid cpufreq
*-pci
description: Host bridge
product: Haswell-ULT DRAM Controller
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 09
width: 32 bits
clock: 33MHz
*-display
description: VGA compatible controller
product: Haswell-ULT Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 09
width: 64 bits
clock: 33MHz
capabilities: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:59 memory:e0000000-e03fffff memory:d0000000-dfffffff ioport:1800(size=64)
*-multimedia:0
description: Audio device
product: Haswell-ULT HD Audio Controller
vendor: Intel Corporation
physical id: 3
bus info: pci@0000:00:03.0
version: 09
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:61 memory:e0510000-e0513fff
*-usb:0
description: USB controller
product: Lynx Point-LP USB xHCI HC
vendor: Intel Corporation
physical id: 14
bus info: pci@0000:00:14.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pm msi xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:57 memory:e0500000-e050ffff
*-generic:0 UNCLAIMED
description: DMA controller
product: Lynx Point-LP Low Power Sub-System DMA
vendor: Intel Corporation
physical id: 15
bus info: pci@0000:00:15.0
version: 04
width: 32 bits
clock: 33MHz
capabilities: pm eisa_dma bus_master cap_list
configuration: latency=0
resources: memory:e0518000-e0518fff memory:e0519000-e0519fff
*-serial:0
description: Serial bus controller
product: Lynx Point-LP I2C Controller #0
vendor: Intel Corporation
physical id: 15.1
bus info: pci@0000:00:15.1
version: 04
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=i2c-designware-pci latency=0
resources: irq:21 memory:e051a000-e051afff memory:e051b000-e051bfff
*-serial:1
description: Serial bus controller
product: Lynx Point-LP I2C Controller #1
vendor: Intel Corporation
physical id: 15.2
bus info: pci@0000:00:15.2
version: 04
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=i2c-designware-pci latency=0
resources: irq:21 memory:e051c000-e051cfff memory:e051d000-e051dfff
*-multimedia:1
description: Audio device
product: Lynx Point-LP HD Audio Controller
vendor: Intel Corporation
physical id: 1b
bus info: pci@0000:00:1b.0
version: 04
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:60 memory:e0514000-e0517fff
*-pci
description: PCI bridge
product: Lynx Point-LP PCI Express Root Port 1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: e4
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:56 memory:e0400000-e04fffff
*-network
description: Wireless interface
product: AR9462 Wireless Network Adapter
vendor: Qualcomm Atheros
physical id: 0
bus info: pci@0000:01:00.0
logical name: wlan0
version: 01
serial: 54:35:30:72:19:01
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list rom ethernet physical wireless
configuration: broadcast=yes driver=ath9k driverversion=3.13.0-36-generic firmware=N/A ip=192.168.1.103 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn
resources: irq:16 memory:e0400000-e047ffff memory:e0480000-e048ffff
*-usb:1
description: USB controller
product: Lynx Point-LP USB EHCI #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 04
width: 32 bits
clock: 33MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=0
resources: irq:19 memory:e051f800-e051fbff
*-isa
description: ISA bridge
product: Lynx Point-LP LPC Controller
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 04
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
resources: irq:0
*-storage
description: SATA controller
product: Lynx Point-LP SATA Controller 1 [AHCI mode]
vendor: Intel Corporation
physical id: 1f.2
bus info: pci@0000:00:1f.2
version: 04
width: 32 bits
clock: 66MHz
capabilities: storage msi pm ahci_1.0 bus_master cap_list
configuration: driver=ahci latency=0
resources: irq:58 ioport:1860(size=8) ioport:1870(size=4) ioport:1868(size=8) ioport:1874(size=4) ioport:1840(size=32) memory:e051f000-e051f7ff
*-serial:2 UNCLAIMED
description: SMBus
product: Lynx Point-LP SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@0000:00:1f.3
version: 04
width: 64 bits
clock: 33MHz
configuration: latency=0
resources: memory:e051fc00-e051fcff ioport:400(size=32)
*-generic:1 UNCLAIMED
description: Signal processing controller
product: Lynx Point-LP Thermal
vendor: Intel Corporation
physical id: 1f.6
bus info: pci@0000:00:1f.6
version: 04
width: 64 bits
clock: 33MHz
capabilities: pm msi cap_list
configuration: latency=0
resources: memory:e051e000-e051efff
*-scsi
physical id: 4
logical name: scsi0
capabilities: emulated
*-disk
description: ATA Disk
product: KINGSTON SNS4151
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: S9FM
serial: 50026B723C068039
size: 14GiB (16GB)
capabilities: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5 guid=49b66876-6af5-7145-8f77-578c49a235f8 sectorsize=512
*-volume:0
description: EXT4 volume
vendor: Linux
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
version: 1.0
serial: e966c5e2-5a10-4703-8860-a716b7119fd5
size: 766MiB
capabilities: journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2014-09-18 04:04:24 filesystem=ext4 lastmountpoint=/mnt/stateful_partition modified=2014-09-23 07:28:46 mounted=2014-09-23 06:56:19 name=STATE state=clean
*-volume:1
description: kernel
vendor: ChromeOS
physical id: 2
bus info: scsi@0:0.0.0,2
logical name: /dev/sda2
serial: 6f298795-684b-bc45-aa6c-d7b9315bd414
capacity: 15MiB
capabilities: precious readonly hidden nomount
configuration: name=KERN-A
*-volume:2
description: root filesystem
vendor: Linux
physical id: 3
bus info: scsi@0:0.0.0,3
logical name: /dev/sda3
version: 1.0
serial: 517313e2-a48d-ed40-b59f-a1cdf3bd27ca
size: 1224MiB
capacity: 2047MiB
capabilities: extended_attributes large_files ext2 initialized
configuration: filesystem=ext2 label=ROOT-A lastmountpoint=/mnt/host/source/src/build/images/peppy/R37-5978.98.0/rootfs modified=2014-09-12 05:08:20 mounted=2014-09-12 04:14:19 name=ROOT-A state=clean
*-volume:3
description: kernel
vendor: ChromeOS
physical id: 4
bus info: scsi@0:0.0.0,4
logical name: /dev/sda4
serial: a456acf9-508a-204e-931f-b0eb5a1ae5cb
capacity: 15MiB
capabilities: precious readonly hidden nomount
configuration: name=KERN-B
*-volume:4
description: root filesystem
vendor: Linux
physical id: 5
bus info: scsi@0:0.0.0,5
logical name: /dev/sda5
version: 1.0
serial: 7f70a777-4da4-924b-97fc-cd3703c4d337
size: 1224MiB
capacity: 2047MiB
capabilities: extended_attributes large_files ext2 initialized
configuration: filesystem=ext2 label=ROOT-A lastmountpoint=/mnt/host/source/src/build/images/peppy/R37-5978.80.0/rootfs modified=2014-08-29 08:40:07 mounted=2014-08-29 07:49:36 name=ROOT-B state=clean
*-volume:5
description: kernel
vendor: ChromeOS
physical id: 6
bus info: scsi@0:0.0.0,6
logical name: /dev/sda6
serial: 76301745-8e4c-d340-937c-3291e023d83b
capacity: 15MiB
capabilities: precious readonly hidden nomount
configuration: name=KERN-C
*-volume:6
description: EXT4 volume
vendor: Linux
physical id: 7
bus info: scsi@0:0.0.0,7
logical name: /dev/sda7
logical name: /
version: 1.0
serial: a50e3787-ecff-454d-aa29-209c1cf24843
size: 10GiB
capabilities: journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2014-09-23 06:59:57 filesystem=ext4 lastmountpoint=/ modified=2014-09-23 11:40:15 mount.fstype=ext4 mount.options=rw,relatime,data=ordered mounted=2014-09-23 11:40:16 name=ROOT-C state=mounted
*-volume:7
description: EXT4 volume
vendor: Linux
physical id: 8
bus info: scsi@0:0.0.0,8
logical name: /dev/sda8
version: 1.0
serial: af0026fb-a049-4d78-9bbc-f591ed9dc3be
size: 16MiB
capabilities: journaled extended_attributes large_files huge_files dir_nlink extents ext4 ext2 initialized
configuration: created=2014-03-14 06:40:21 filesystem=ext4 label=OEM modified=2014-09-22 08:13:47 mounted=2014-09-22 07:53:04 name=OEM state=clean
*-volume:8
description: reserved
vendor: ChromeOS
physical id: 9
bus info: scsi@0:0.0.0,9
logical name: /dev/sda9
serial: 35cd2036-8a39-3a44-b125-c30ebe049479
configuration: name=reserved
*-volume:9
description: reserved
vendor: ChromeOS
physical id: a
bus info: scsi@0:0.0.0,10
logical name: /dev/sda10
serial: 1caebf00-1d9b-594b-a1ae-418175c8524b
configuration: name=reserved
*-volume:10
description: EFI partition
physical id: b
bus info: scsi@0:0.0.0,11
logical name: /dev/sda11
serial: 44da0ee8-f72f-c34a-9872-80c0fcdf2fea
capacity: 8191KiB
configuration: name=RWFW
*-volume:11
description: Windows FAT volume
vendor: mkdosfs
physical id: c
bus info: scsi@0:0.0.0,12
logical name: /dev/sda12
version: FAT16
serial: 4555-152e
size: 15EiB
capabilities: boot fat initialized
configuration: FATs=2 filesystem=fat label=EFI-SYSTEM name=EFI-SYSTEM

______________________________________________________________________________

I'm using Kubuntu.....
I read that I had to use LSHW, or some other Utils, and that giant wall of text is what I got..... I used LSHW.... Basically, whenever I use Bleachbit, change some settings, sync Chromium and Chrome with my Google Account, my Login Screen freezes when I hit "Enter", after logging in again, when Restarting, Shutting Down, and Powering On, or when I simply Logout..... It stays there, repeatedly..... Sometimes, I have to use the "Nuke" option, and run rm -r ~/.kde, instead of what USUALLY works, which is rm -r ~/.config..... Then I run sudo restart lightdm.... This usually works, and it isn't something I mind having to do from time to time... However, at times I am NOT so lucky..... Sometimes, after an Update, which requires a Restart, my Touchpad wouldn't work.... At ALL..... D: Such is what befell me this morning..... I Re-installed Kubuntu, and my Touchpad worked again... Other times, when the Login Screen froze, which still lets me move my Mouse Cursor, I then had to Re-install AGAIN, since neither removing .kde or .config via TTY seemed to fix it..... I keep ChromeOS Linux on here, to use the command there to Reinstall Kubuntu, and *buntu, Mint, and pretty much EVERY Distro, except Puppy, seems to be too LARGE to boot from USB, so Imaging my SSD not an option..... I mean, I DO use it for SOME other things, but anyway..... Long story short, I lost track of the ammount of times I had to Re-install this beast, and have now mastered the art of installing it..... I EVEN learned how to set up Wine properly (which I ALWAYS had trouble with in the past...)... Ogod.... Honestly, running *buntu on this Chromebook has been a never-ending nightmare for me..... Honestly, I think it's CEARTAINLY the Hardware..... If I had been introduced to Linux on this thing, I might have went RIGHT back to Windows..... D: Ugh..... Alternate Futures can be SCARY..... As a bit of background, I once ran Linux (Mint and Ubuntu) on two SD Cards, on a Toshiba Satellite, virtually FLAWLESSLY, (except Ubuntu's incessant "System Problem" "errors".....)... I also have Peppermint OS and Kubuntu running on a Dell Inspiron 1420, of all things.... And *they're* doing fine..... I feel bad, having issues like this, and then thinking that I have something to give to the FOSS Community..... But, I suck at Python and C++, and can't make anything useful..... Thanks for any help, guys.......

 

[DevynCJohnson]

@blackneos940

When using Bleachbit, be careful because you may be deleting needed files. If possible, only use one distro on the chromebook. Do you see any important information in the logs (/var/logs/syslog.log or dmesg)? As for your software repos, did you set it to allow installing proprietary software (restricted) which may be used to install any needed proprietary drivers?

The Chromebook uses some specialized hardware that may not be compatible with many Linux distros. Sometimes, special steps are required for installation.
http://chromeos-cr48.blogspot.fr/
http://www.cnet.com/how-to/how-to-run-both-chrome-os-and-ubuntu-on-a-chromebook/
http://www.everydaylinuxuser.com/2014/03/how-to-install-ubuntu-and-minecraft-on.html
http://ask.metafilter.com/258762/Ubuntu-on-my-Chromebook-I-thought-I-knew-my-login-but-I-dont

As for WINE - http://www.linux.org/threads/installing-and-configuring-windows-emulator-wine.4368/

 

[arochester]

I've pointed to it before

never use cleaning applications like Bleachbit! They are very risky and may damage your system beyond repair. There are a few safe cleaning actions, which I'll describe below.

- https://sites.google.com/site/easylinuxtipsproject/clean

 

[blackneos940]

Thanks for the response, guys..... As for Wine, I know how to set it up now.... But, I don't quite feel like forcing that freeze issue to occur again, but I'm sure it'll happen soon (Godforbid)..... When it does, I'll use TTY again and log the issue to a TXT file with NANO, and restart it again, deleting the .config Folder again..... I'll then open up Mousepad or whatever, and Copy/Paste the output here..... I keep ChromeOS on here mainly for the purpose of Re-installation, though, since I can't boot MOST Distros via USB..... Wait..... I found them..... I'll post the files here, instead of taking up screen space.....

 

[blackneos940]

Crap..... Can't upload .txt Files..... Uh, here:

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.13.0-36-generic (buildd@toyol) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #63-Ubuntu SMP Wed Sep 3 21:30:07 UTC 2014 (Ubuntu 3.13.0-36.63-generic 3.13.11.6)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=a50e3787-ecff-454d-aa29-209c1cf24843 ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000002ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000030000-0x000000000003ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009e3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000000efffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000f00000-0x0000000000ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000001000000-0x000000007bf79fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bf7a000-0x000000007e9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer Peppy, BIOS 04/30/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x100600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 007C800000 mask 7FFF800000 uncachable
[ 0.000000] 2 base 007D000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 007E000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 write-combining
[ 0.000000] 5 base 00FF800000 mask 7FFF800000 uncachable
[ 0.000000] 6 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x7bf7a max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01fdf000, 0x01fdffff] PGTABLE
[ 0.000000] BRK [0x01fe0000, 0x01fe0fff] PGTABLE
[ 0.000000] BRK [0x01fe1000, 0x01fe1fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100400000-0x1005fffff]
[ 0.000000] [mem 0x100400000-0x1005fffff] page 2M
[ 0.000000] BRK [0x01fe2000, 0x01fe2fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1003fffff]
[ 0.000000] [mem 0x100000000-0x1003fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x00efffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x00dfffff] page 2M
[ 0.000000] [mem 0x00e00000-0x00efffff] page 4k
[ 0.000000] BRK [0x01fe3000, 0x01fe3fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x01000000-0x7bf79fff]
[ 0.000000] [mem 0x01000000-0x7bdfffff] page 2M
[ 0.000000] [mem 0x7be00000-0x7bf79fff] page 4k
[ 0.000000] RAMDISK: [mem 0x34b0e000-0x3657efff]
[ 0.000000] ACPI: RSDP 00000000000fdbb0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 000000007bf840e0 000054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 000000007bf88690 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
[ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202)
[ 0.000000] ACPI: DSDT 000000007bf84250 004431 (v02 COREv4 COREBOOT 20110725 INTL 20090123)
[ 0.000000] ACPI: FACS 000000007bf84210 000040
[ 0.000000] ACPI: HPET 000000007bf88790 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 000000007bf887d0 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: MCFG 000000007bf88830 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 000000007bf89730 0008A0 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: SSDT 000000007bf89fd0 00005C (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001005fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x1005fffff]
[ 0.000000] NODE_DATA [mem 0x1005f9000-0x1005fdfff]
[ 0.000000] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880079800000-ffff88007b9fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x1005fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0002ffff]
[ 0.000000] node 0: [mem 0x00040000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x00efffff]
[ 0.000000] node 0: [mem 0x01000000-0x7bf79fff]
[ 0.000000] node 0: [mem 0x100000000-0x1005fffff]
[ 0.000000] On node 0 totalpages: 508935
[ 0.000000] DMA zone: 59 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3725 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7870 pages used for memmap
[ 0.000000] DMA32 zone: 503674 pages, LIFO batch:31
[ 0.000000] Normal zone: 24 pages used for memmap
[ 0.000000] Normal zone: 1536 pages, LIFO batch:0
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: [mem 0x00030000-0x0003ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00f00000-0x00ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bf7a000-0x7e9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ea00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed83fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed84000-0xfed84fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed85000-0xffffffff]
[ 0.000000] e820: [mem 0x7ea00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880100200000 s86336 r8192 d24256 u1048576
[ 0.000000] pcpu-alloc: s86336 r8192 d24256 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 500961
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.13.0-36-generic root=UUID=a50e3787-ecff-454d-aa29-209c1cf24843 ro quiet splash vt.handoff=7
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1890920K/2035740K available (7373K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1440K bss, 144820K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=2.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-1.
[ 0.000000] NR_IRQS:16640 nr_irqs:512 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 8912896 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.004000] tsc: Detected 1396.834 MHz processor
[ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 2793.66 BogoMIPS (lpj=5587336)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000038] Security Framework initialized
[ 0.000059] AppArmor: AppArmor initialized
[ 0.000060] Yama: becoming mindful.
[ 0.000352] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000979] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.001257] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.001266] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.001512] Initializing cgroup subsys memory
[ 0.001518] Initializing cgroup subsys devices
[ 0.001521] Initializing cgroup subsys freezer
[ 0.001523] Initializing cgroup subsys blkio
[ 0.001525] Initializing cgroup subsys perf_event
[ 0.001528] Initializing cgroup subsys hugetlb
[ 0.001560] CPU: Physical Processor ID: 0
[ 0.001561] CPU: Processor Core ID: 0
[ 0.002923] mce: CPU supports 7 MCE banks
[ 0.002941] CPU0: Thermal monitoring enabled (TM1)
[ 0.002956] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[ 0.002956] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
[ 0.002956] tlb_flushall_shift: 6
[ 0.003117] Freeing SMP alternatives memory: 32K (ffffffff81e6d000 - ffffffff81e75000)
[ 0.004642] ACPI: Core revision 20131115
[ 0.007618] ACPI: All ACPI Tables successfully acquired
[ 0.011239] ftrace: allocating 28537 entries in 112 pages
[ 0.030671] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070355] smpboot: CPU0: Intel(R) Celeron(R) 2955U @ 1.40GHz (fam: 06, model: 45, stepping: 01)
[ 0.070364] TSC deadline timer enabled
[ 0.070375] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.070385] ... version: 3
[ 0.070387] ... bit width: 48
[ 0.070388] ... generic registers: 8
[ 0.070390] ... value mask: 0000ffffffffffff
[ 0.070391] ... max period: 0000ffffffffffff
[ 0.070392] ... fixed-purpose events: 3
[ 0.070394] ... event mask: 00000007000000ff
[ 0.072647] x86: Booting SMP configuration:
[ 0.072650] .... node #0, CPUs: #1
[ 0.087211] x86: Booted up 1 node, 2 CPUs
[ 0.087215] smpboot: Total of 2 processors activated (5587.33 BogoMIPS)
[ 0.087297] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.089315] devtmpfs: initialized
[ 0.092302] EVM: security.selinux
[ 0.092304] EVM: security.SMACK64
[ 0.092306] EVM: security.ima
[ 0.092307] EVM: security.capability
[ 0.093365] pinctrl core: initialized pinctrl subsystem
[ 0.093443] regulator-dummy: no parameters
[ 0.093480] RTC time: 22:13:58, date: 09/23/14
[ 0.093524] NET: Registered protocol family 16
[ 0.093656] cpuidle: using governor ladder
[ 0.093658] cpuidle: using governor menu
[ 0.093710] ACPI: bus type PCI registered
[ 0.093712] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.093769] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.093771] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.101489] PCI: Using configuration type 1 for base access
[ 0.102565] bio: create slab <bio-0> at 0
[ 0.102743] ACPI: Added _OSI(Module Device)
[ 0.102746] ACPI: Added _OSI(Processor Device)
[ 0.102748] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.102750] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.113176] ACPI: Interpreter enabled
[ 0.113183] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
[ 0.113189] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
[ 0.113205] ACPI: (supports S0 S3 S4 S5)
[ 0.113207] ACPI: Using IOAPIC for interrupt routing
[ 0.113231] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.113383] ACPI: No dock devices found.
[ 0.120629] ACPI: Power Resource [TNP0] (off)
[ 0.120663] ACPI: Power Resource [TNP1] (on)
[ 0.121123] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.121129] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.121175] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.121290] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cebff])
[ 0.121296] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.121514] PCI host bridge to bus 0000:00
[ 0.121517] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.121519] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.121522] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.121524] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.121526] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.121528] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.121530] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.121532] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.121534] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.121536] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.121539] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.121541] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.121543] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.121545] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.121547] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.121549] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.121551] pci_bus 0000:00: root bus resource [mem 0x7ea00001-0xfebfffff]
[ 0.121553] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.121564] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.121683] pci 0000:00:02.0: [8086:0a06] type 00 class 0x030000
[ 0.121700] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[ 0.121710] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.121717] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f]
[ 0.121830] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.121841] pci 0000:00:03.0: reg 0x10: [mem 0xe0510000-0xe0513fff 64bit]
[ 0.121976] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.121997] pci 0000:00:14.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit]
[ 0.122066] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.122124] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.122163] pci 0000:00:15.0: [8086:9c60] type 00 class 0x080102
[ 0.122183] pci 0000:00:15.0: reg 0x10: [mem 0xe0518000-0xe0518fff]
[ 0.122195] pci 0000:00:15.0: reg 0x14: [mem 0xe0519000-0xe0519fff]
[ 0.122347] pci 0000:00:15.1: [8086:9c61] type 00 class 0x0c8000
[ 0.122367] pci 0000:00:15.1: reg 0x10: [mem 0xe051a000-0xe051afff]
[ 0.122379] pci 0000:00:15.1: reg 0x14: [mem 0xe051b000-0xe051bfff]
[ 0.122529] pci 0000:00:15.2: [8086:9c62] type 00 class 0x0c8000
[ 0.122549] pci 0000:00:15.2: reg 0x10: [mem 0xe051c000-0xe051cfff]
[ 0.122561] pci 0000:00:15.2: reg 0x14: [mem 0xe051d000-0xe051dfff]
[ 0.122721] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.122738] pci 0000:00:1b.0: reg 0x10: [mem 0xe0514000-0xe0517fff 64bit]
[ 0.122811] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.122870] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.122902] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.122975] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.123075] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.123098] pci 0000:00:1d.0: reg 0x10: [mem 0xe051f800-0xe051fbff]
[ 0.123200] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.123265] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.123302] pci 0000:00:1f.0: [8086:9c45] type 00 class 0x060100
[ 0.123504] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.123522] pci 0000:00:1f.2: reg 0x10: [io 0x1860-0x1867]
[ 0.123531] pci 0000:00:1f.2: reg 0x14: [io 0x1870-0x1873]
[ 0.123540] pci 0000:00:1f.2: reg 0x18: [io 0x1868-0x186f]
[ 0.123549] pci 0000:00:1f.2: reg 0x1c: [io 0x1874-0x1877]
[ 0.123557] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f]
[ 0.123566] pci 0000:00:1f.2: reg 0x24: [mem 0xe051f000-0xe051f7ff]
[ 0.123609] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.123688] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.123705] pci 0000:00:1f.3: reg 0x10: [mem 0xe051fc00-0xe051fcff 64bit]
[ 0.123728] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.123835] pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
[ 0.123870] pci 0000:00:1f.6: reg 0x10: [mem 0xe051e000-0xe051efff 64bit]
[ 0.124122] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
[ 0.124147] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe047ffff 64bit]
[ 0.124207] pci 0000:01:00.0: reg 0x30: [mem 0xe0480000-0xe048ffff pref]
[ 0.124265] pci 0000:01:00.0: supports D1 D2
[ 0.124267] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.131261] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.131267] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.131473] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.131533] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
[ 0.131590] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.131644] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
[ 0.131698] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.131750] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.131803] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.131856] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.132382] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.132433] Found 1 acpi root devices
[ 0.132476] ACPI : EC: GPE = 0x24, I/O: command/status = 0x66, data = 0x62
[ 0.132593] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.132598] vgaarb: loaded
[ 0.132599] vgaarb: bridge control possible 0000:00:02.0
[ 0.132802] SCSI subsystem initialized
[ 0.132854] libata version 3.00 loaded.
[ 0.132882] ACPI: bus type USB registered
[ 0.132908] usbcore: registered new interface driver usbfs
[ 0.132918] usbcore: registered new interface driver hub
[ 0.132951] usbcore: registered new device driver usb
[ 0.133064] PCI: Using ACPI for IRQ routing
[ 0.134701] PCI: pci_cache_line_size set to 64 bytes
[ 0.134756] e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff]
[ 0.134759] e820: reserve RAM buffer [mem 0x7bf7a000-0x7bffffff]
[ 0.134760] e820: reserve RAM buffer [mem 0x100600000-0x103ffffff]
[ 0.134853] NetLabel: Initializing
[ 0.134855] NetLabel: domain hash size = 128
[ 0.134856] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.134872] NetLabel: unlabeled traffic allowed by default
[ 0.134937] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.134945] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.136986] Switched to clocksource hpet
[ 0.142980] AppArmor: AppArmor Filesystem Enabled
[ 0.143008] pnp: PnP ACPI init
[ 0.143028] ACPI: bus type PNP registered
[ 0.143095] pnp 00:00: Plug and Play ACPI device, IDs PNP0c0e (active)
[ 0.143132] pnp 00:01: Plug and Play ACPI device, IDs PNP0c0e (active)
[ 0.143205] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.143208] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.143210] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.143213] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.143216] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.143218] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.143221] system 00:02: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.143223] system 00:02: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.143226] system 00:02: [mem 0x00f00000-0x00ffffff] has been reserved
[ 0.143230] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.143419] pnp 00:03: [dma 4]
[ 0.143440] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.143466] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.143566] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.143570] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.143607] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.143673] system 00:07: [io 0x1000-0x10fe] could not be reserved
[ 0.143677] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.143706] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.143750] system 00:09: [io 0x0900-0x09fe] has been reserved
[ 0.143753] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.143792] system 00:0a: [io 0x0200] has been reserved
[ 0.143794] system 00:0a: [io 0x0204] has been reserved
[ 0.143797] system 00:0a: [io 0x0800-0x087f] has been reserved
[ 0.143799] system 00:0a: [io 0x0880-0x08ff] has been reserved
[ 0.143802] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.143838] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.143873] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.143916] pnp 00:0d: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.144014] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.144136] pnp: PnP ACPI: found 15 devices
[ 0.144137] ACPI: bus type PNP unregistered
[ 0.150540] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.150548] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.150558] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.150561] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.150563] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.150565] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.150568] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.150570] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.150572] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.150574] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.150576] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.150578] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.150581] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.150583] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.150585] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.150587] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.150589] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.150591] pci_bus 0000:00: resource 19 [mem 0x7ea00001-0xfebfffff]
[ 0.150594] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
[ 0.150596] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
[ 0.150633] NET: Registered protocol family 2
[ 0.150817] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.150872] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.150921] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.150944] TCP: reno registered
[ 0.150952] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.150966] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.151022] NET: Registered protocol family 1
[ 0.151036] pci 0000:00:02.0: Boot video device
[ 0.151514] PCI: CLS 64 bytes, default 64
[ 0.151585] Trying to unpack rootfs image as initramfs...
[ 0.822527] Freeing initrd memory: 27076K (ffff880034b0e000 - ffff88003657f000)
[ 0.822533] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.822537] software IO TLB [mem 0x75800000-0x79800000] (64MB) mapped at [ffff880075800000-ffff8800797fffff]
[ 0.822717] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
[ 0.822725] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
[ 0.822775] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.822777] Scanning for low memory corruption every 60 seconds
[ 0.823055] Initialise system trusted keyring
[ 0.823110] audit: initializing netlink socket (disabled)
[ 0.823121] type=2000 audit(1411510437.816:1): initialized
[ 0.864876] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.866104] zbud: loaded
[ 0.866299] VFS: Disk quotas dquot_6.5.2
[ 0.866347] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.866838] fuse init (API version 7.22)
[ 0.866926] msgmni has been set to 3746
[ 0.866992] Key type big_key registered
[ 0.867355] Key type asymmetric registered
[ 0.867358] Asymmetric key parser 'x509' registered
[ 0.867392] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.867423] io scheduler noop registered
[ 0.867425] io scheduler deadline registered (default)
[ 0.867451] io scheduler cfq registered
[ 0.867683] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
[ 0.867792] aer 0000:00:1c.0cie02: service driver aer loaded
[ 0.867808] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.867810] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.867814] pcie_pme 0000:00:1c.0cie01: service driver pcie_pme loaded
[ 0.867828] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.867845] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.867889] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.867891] vesafb: scrolling: redraw
[ 0.867893] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.868450] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004400000, using 4160k, total 4160k
[ 0.872291] Console: switching to colour frame buffer device 170x48
[ 0.875985] fb0: VESA VGA frame buffer device
[ 0.876014] intel_idle: MWAIT substates: 0x11142120
[ 0.876015] intel_idle: v0.4 model 0x45
[ 0.876017] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.876115] ipmi message handler version 39.2
[ 0.876157] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.876205] ACPI: AC Adapter [AC] (off-line)
[ 0.876292] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
[ 0.876319] ACPI: Lid Switch [LID0]
[ 0.876355] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
[ 0.876359] ACPI: Power Button [PWRB]
[ 0.876392] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.876395] ACPI: Sleep Button [TPAD]
[ 0.876427] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:01/input/input3
[ 0.876430] ACPI: Sleep Button [TSCR]
[ 0.876476] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 0.876479] ACPI: Power Button [PWRF]
[ 0.876537] ACPI: Fan [TDP0] (off)
[ 0.876569] ACPI: Fan [TDP1] (on)
[ 0.877351] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.877354] ACPI: Thermal Zone [THRM] (47 C)
[ 0.877380] GHES: HEST is not enabled!
[ 0.877470] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.877836] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 0.877842] ACPI: Battery Slot [BAT0] (battery present)
[ 0.878853] Linux agpgart interface v0.103
[ 0.878971] tpm_tis 00:0d: 1.2 TPM (device-id 0xB, rev-id 16)
[ 1.147252] brd: module loaded
[ 1.147931] loop: module loaded
[ 1.148338] libphy: Fixed MDIO Bus: probed
[ 1.148438] tun: Universal TUN/TAP device driver, 1.6
[ 1.148439] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 1.148483] PPP generic driver version 2.4.2
[ 1.148525] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.148529] ehci-pci: EHCI PCI platform driver
[ 1.148699] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.148705] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.148720] ehci-pci 0000:00:1d.0: debug port 2
[ 1.152612] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.152630] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe051f800
[ 1.160829] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.160884] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.160886] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.160888] usb usb1: Product: EHCI Host Controller
[ 1.160891] usb usb1: Manufacturer: Linux 3.13.0-36-generic ehci_hcd
[ 1.160892] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.161044] hub 1-0:1.0: USB hub found
[ 1.161051] hub 1-0:1.0: 2 ports detected
[ 1.161157] ehci-platform: EHCI generic platform driver
[ 1.161166] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.161168] ohci-pci: OHCI PCI platform driver
[ 1.161178] ohci-platform: OHCI generic platform driver
[ 1.161185] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.161338] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.161344] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.161435] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.161458] xhci_hcd 0000:00:14.0: irq 57 for MSI/MSI-X
[ 1.161523] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.161525] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.161527] usb usb2: Product: xHCI Host Controller
[ 1.161529] usb usb2: Manufacturer: Linux 3.13.0-36-generic xhci_hcd
[ 1.161531] usb usb2: SerialNumber: 0000:00:14.0
[ 1.161657] hub 2-0:1.0: USB hub found
[ 1.161669] hub 2-0:1.0: 8 ports detected
[ 1.161913] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.161917] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.161956] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.161958] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.161960] usb usb3: Product: xHCI Host Controller
[ 1.161962] usb usb3: Manufacturer: Linux 3.13.0-36-generic xhci_hcd
[ 1.161964] usb usb3: SerialNumber: 0000:00:14.0
[ 1.162083] hub 3-0:1.0: USB hub found
[ 1.162091] hub 3-0:1.0: 4 ports detected
[ 1.169049] i8042: PNP: PS/2 Controller [PNP0303S2K] at 0x60,0x64 irq 1
[ 1.169053] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.169591] i8042: Warning: Keylock active
[ 1.169732] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.170033] mousedev: PS/2 mouse device common for all mice
[ 1.170742] rtc_cmos 00:08: RTC can wake from S4
[ 1.170941] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 1.170973] rtc_cmos 00:08: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.171080] device-mapper: uevent: version 1.0.3
[ 1.171224] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
[ 1.171231] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.171368] TCP: cubic registered
[ 1.171494] NET: Registered protocol family 10
[ 1.171729] NET: Registered protocol family 17
[ 1.171739] Key type dns_resolver registered
[ 1.172265] Loading compiled-in X.509 certificates
[ 1.173558] Loaded X.509 cert 'Magrathea: Glacier signing key: 38f3b6c63a85affdfbbe0e53339df8e0c6b6c9d5'
[ 1.173576] registered taskstats version 1
[ 1.173749] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 1.176125] Key type trusted registered
[ 1.178236] Key type encrypted registered
[ 1.180276] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.472877] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.605151] usb 1-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.605156] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.605418] hub 1-1:1.0: USB hub found
[ 1.605522] hub 1-1:1.0: 8 ports detected
[ 1.772857] usb 2-3: new high-speed USB device number 2 using xhci_hcd
[ 1.820780] tsc: Refined TSC clocksource calibration: 1396.766 MHz
[ 1.859560] usb 2-3: New USB device found, idVendor=1bcf, idProduct=2c67
[ 1.859565] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.859568] usb 2-3: Product: HD WebCam
[ 1.859570] usb 2-3: Manufacturer: NC.21411.02434502F15LM0001
[ 2.040757] usb 2-4: new full-speed USB device number 3 using xhci_hcd
[ 2.058323] usb 2-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409
[ 2.060203] usb 2-4: New USB device found, idVendor=0489, idProduct=e056
[ 2.060206] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.820767] Switched to clocksource tsc
[ 53.984386] regulator-dummy: disabling
[ 53.984441] Magic number: 14:250:250
[ 53.984541] rtc_cmos 00:08: setting system clock to 2014-09-23 22:14:51 UTC (1411510491)
[ 53.984744] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 53.984746] EDD information not available.
[ 53.984784] PM: Hibernation image not present or could not be loaded.
[ 53.985912] Freeing unused kernel memory: 1336K (ffffffff81d1f000 - ffffffff81e6d000)
[ 53.985915] Write protecting the kernel read-only data: 12288k
[ 53.988986] Freeing unused kernel memory: 808K (ffff880001736000 - ffff880001800000)
[ 53.991387] Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
[ 54.009525] systemd-udevd[102]: starting version 204
[ 54.035623] [drm] Initialized drm 1.1.0 20060810
[ 54.038973] ahci 0000:00:1f.2: version 3.0
[ 54.039158] ahci 0000:00:1f.2: irq 58 for MSI/MSI-X
[ 54.039182] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 54.044583] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 54.044727] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 54.052066] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
[ 54.052072] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo only pio slum part deso sadm sds apst
[ 54.053944] scsi0 : ahci
[ 54.055506] scsi1 : ahci
[ 54.055565] ata1: SATA max UDMA/133 abar m2048@0xe051f000 port 0xe051f100 irq 58
[ 54.055568] ata2: DUMMY
[ 54.086425] [drm] Memory usable by graphics device = 2048M
[ 54.086431] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[ 54.086433] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 54.086451] Console: switching to colour dummy device 80x25
[ 54.127904] i915 0000:00:02.0: irq 59 for MSI/MSI-X
[ 54.127917] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 54.127919] [drm] Driver supports precise vblank timestamp query.
[ 54.128419] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+memwns=io+mem
[ 54.194274] fbcon: inteldrmfb (fb0) is primary device
[ 54.376031] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 54.376218] ata1.00: ATA-10: KINGSTON SNS4151S316G, S9FM01.1, max UDMA/100
[ 54.376221] ata1.00: 31277232 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 54.376577] ata1.00: configured for UDMA/100
[ 54.376831] scsi 0:0:0:0: Direct-Access ATA KINGSTON SNS4151 S9FM PQ: 0 ANSI: 5
[ 54.376993] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 54.377036] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 54.377044] sd 0:0:0:0: [sda] Write Protect is off
[ 54.377046] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 54.377062] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 54.378874] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12
[ 54.379796] sd 0:0:0:0: [sda] Attached SCSI disk
[ 55.783780] Console: switching to colour frame buffer device 170x48
[ 55.787765] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 55.787767] i915 0000:00:02.0: registered panic notifier
[ 55.787785] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 55.811842] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 55.963183] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 56.072451] random: init urandom read with 53 bits of entropy available
[ 56.434822] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 56.435844] systemd-udevd[358]: starting version 204
[ 56.520523] i2c_designware_core: module verification failed: signature and/or required key missing - tainting kernel
[ 56.572059] lp: driver loaded but no devices found
[ 56.585547] ppdev: user-space parallel port driver
[ 56.699145] random: nonblocking pool is initialized
[ 56.702173] HDA driver get symbol successfully from i915 module
[ 56.702663] snd_hda_intel 0000:00:1b.0: irq 60 for MSI/MSI-X
[ 56.708018] snd_hda_intel 0000:00:03.0: irq 61 for MSI/MSI-X
[ 56.755728] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 56.755857] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[ 56.755947] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 56.764707] SKU: Nid=0x0 sku_cfg=0x00000283
[ 56.764711] SKU: port_connectivity=0x0
[ 56.764712] SKU: enable_pcbeep=0x1
[ 56.764713] SKU: check_sum=0x00000000
[ 56.764715] SKU: customization=0x00000000
[ 56.764716] SKU: external_amp=0x0
[ 56.764717] SKU: platform_type=0x0
[ 56.764718] SKU: swap=0x1
[ 56.764720] SKU: override=0x1
[ 56.764936] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 56.764938] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 56.764940] hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 56.764941] mono: mono_out=0x0
[ 56.764942] inputs:
[ 56.764944] Internal Mic=0x1a
[ 56.764946] Mic=0x19
[ 56.764948] realtek: Enabling init ASM_ID=0x0283 CODEC_ID=10ec0283
[ 56.771956] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 56.775037] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 56.858841] cfg80211: Calling CRDA to update world regulatory domain
[ 56.987931] Bluetooth: Core ver 2.17
[ 56.995606] NET: Registered protocol family 31
[ 56.995611] Bluetooth: HCI device and connection manager initialized
[ 56.995622] Bluetooth: HCI socket layer initialized
[ 56.995626] Bluetooth: L2CAP socket layer initialized
[ 56.995633] Bluetooth: SCO socket layer initialized
[ 57.010072] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 57.010076] Bluetooth: BNEP filters: protocol multicast
[ 57.010086] Bluetooth: BNEP socket layer initialized
[ 57.015764] Bluetooth: RFCOMM TTY layer initialized
[ 57.015779] Bluetooth: RFCOMM socket layer initialized
[ 57.015784] Bluetooth: RFCOMM ver 1.11
[ 57.020770] device-mapper: multipath: version 1.6.0 loaded
[ 57.062953] ath: phy0: ASPM enabled: 0x43
[ 57.062960] ath: EEPROM regdomain: 0x6c
[ 57.062962] ath: EEPROM indicates we should expect a direct regpair map
[ 57.062965] ath: Country alpha2 being used: 00
[ 57.062966] ath: Regpair used: 0x6c
[ 57.124826] init: cups main process (588) killed by HUP signal
[ 57.124839] init: cups main process ended, respawning
[ 57.152209] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 57.152834] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90004780000, irq=16
[ 57.209919] usbcore: registered new interface driver btusb
[ 57.255899] intel_rapl: domain uncore energy ctr 3365:3365 not working, skip
[ 57.358368] isl29018: module is from the staging directory, the quality is unknown, you have been warned.
[ 57.370291] isl29018 8-0044: No cache defaults, reading back from HW
[ 57.396582] Linux video capture interface: v2.00
[ 57.421953] uvcvideo: Found UVC 1.00 device HD WebCam (1bcf:2c67)
[ 57.430952] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/input/input12
[ 57.433232] usbcore: registered new interface driver uvcvideo
[ 57.433237] USB Video Class driver (1.1.1)
[ 57.459556] input: Cypress APA Trackpad (cyapa) as /devices/pci0000:00/0000:00:15.1/i2c-7/7-0067/input/input13
[ 57.539015] cfg80211: World regulatory domain updated:
[ 57.539020] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 57.539023] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 57.539025] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 57.539027] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 57.539029] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 57.539031] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 57.582616] usbcore: registered new interface driver ath3k
[ 57.582676] usb 2-4: USB disconnect, device number 3
[ 57.615933] init: failsafe main process (689) killed by TERM signal
[ 57.851452] usb 2-4: new full-speed USB device number 4 using xhci_hcd
[ 57.869145] usb 2-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409
[ 57.871013] usb 2-4: New USB device found, idVendor=0489, idProduct=e056
[ 57.871016] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 58.454569] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 58.458482] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready

 

[blackneos940]

And here:

Sep 24 01:06:17 chrubuntu rsyslogd: [origin software="rsyslogd" swVersion="7.4.4" x-pid="537" x-info="http://www.rsyslog.com"] rsyslogd was HUPed
Sep 24 01:06:19 chrubuntu anacron[4110]: Job `cron.daily' terminated
Sep 24 01:06:19 chrubuntu anacron[4110]: Normal exit (1 job run)
Sep 24 01:07:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 01:13:57 chrubuntu wpa_supplicant[884]: message repeated 3 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 01:14:06 chrubuntu wpa_supplicant[884]: nl80211: send_and_recv->nl_recvmsgs failed: -33
Sep 24 01:15:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 01:17:01 chrubuntu CRON[5690]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Sep 24 01:25:31 chrubuntu kernel: [11491.375231] usb 2-5: USB disconnect, device number 13
Sep 24 01:25:57 chrubuntu wpa_supplicant[884]: message repeated 5 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 01:26:06 chrubuntu wpa_supplicant[884]: nl80211: send_and_recv->nl_recvmsgs failed: -33
Sep 24 01:27:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 01:41:57 chrubuntu wpa_supplicant[884]: message repeated 7 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 01:42:19 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 01:43:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 01:48:40 chrubuntu dbus[470]: [system] Activating service name='org.kubuntu.qaptworker2' (using servicehelper)
Sep 24 01:48:40 chrubuntu dbus[470]: [system] Successfully activated service 'org.kubuntu.qaptworker2'
Sep 24 02:17:01 chrubuntu CRON[6978]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Sep 24 02:41:57 chrubuntu wpa_supplicant[884]: message repeated 29 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 02:42:15 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 02:43:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 02:44:06 chrubuntu wpa_supplicant[884]: nl80211: send_and_recv->nl_recvmsgs failed: -33
Sep 24 02:45:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 03:17:01 chrubuntu CRON[7237]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Sep 24 03:21:08 chrubuntu kernel: [18427.351623] usb 2-5: new full-speed USB device number 14 using xhci_hcd
Sep 24 03:21:08 chrubuntu kernel: [18427.372549] usb 2-5: New USB device found, idVendor=0e6f, idProduct=011f
Sep 24 03:21:08 chrubuntu kernel: [18427.372558] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 24 03:21:08 chrubuntu kernel: [18427.372563] usb 2-5: Product: Rock Candy Gamepad for Xbox 360
Sep 24 03:21:08 chrubuntu kernel: [18427.372568] usb 2-5: Manufacturer: Performance Designed Products
Sep 24 03:21:08 chrubuntu kernel: [18427.372571] usb 2-5: SerialNumber: 06E3D5D6
Sep 24 03:21:08 chrubuntu kernel: [18427.373498] input: Generic X-Box pad as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input23
Sep 24 03:21:08 chrubuntu mtp-probe: checking bus 2, device 14: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-5"
Sep 24 03:21:08 chrubuntu mtp-probe: bus: 2, device: 14 was not an MTP device
Sep 24 03:21:51 chrubuntu anacron[7313]: Anacron 2.3 started on 2014-09-24
Sep 24 03:21:51 chrubuntu anacron[7313]: Normal exit (0 jobs run)
Sep 24 03:21:59 chrubuntu kernel: [18478.469337] usb 2-5: USB disconnect, device number 14
Sep 24 03:22:01 chrubuntu kernel: [18480.186756] usb 2-5: new full-speed USB device number 15 using xhci_hcd
Sep 24 03:22:01 chrubuntu kernel: [18480.207549] usb 2-5: New USB device found, idVendor=0e6f, idProduct=011f
Sep 24 03:22:01 chrubuntu kernel: [18480.207558] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 24 03:22:01 chrubuntu kernel: [18480.207564] usb 2-5: Product: Rock Candy Gamepad for Xbox 360
Sep 24 03:22:01 chrubuntu kernel: [18480.207568] usb 2-5: Manufacturer: Performance Designed Products
Sep 24 03:22:01 chrubuntu kernel: [18480.207572] usb 2-5: SerialNumber: 06E3D5D6
Sep 24 03:22:01 chrubuntu kernel: [18480.208370] input: Generic X-Box pad as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input24
Sep 24 03:22:01 chrubuntu mtp-probe: checking bus 2, device 15: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-5"
Sep 24 03:22:01 chrubuntu mtp-probe: bus: 2, device: 15 was not an MTP device
Sep 24 03:22:02 chrubuntu kernel: [18481.022772] usb 2-5: USB disconnect, device number 15
Sep 24 03:22:02 chrubuntu kernel: [18481.810546] usb 2-5: new full-speed USB device number 16 using xhci_hcd
Sep 24 03:22:02 chrubuntu kernel: [18481.831163] usb 2-5: New USB device found, idVendor=0e6f, idProduct=011f
Sep 24 03:22:02 chrubuntu kernel: [18481.831172] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 24 03:22:02 chrubuntu kernel: [18481.831177] usb 2-5: Product: Rock Candy Gamepad for Xbox 360
Sep 24 03:22:02 chrubuntu kernel: [18481.831181] usb 2-5: Manufacturer: Performance Designed Products
Sep 24 03:22:02 chrubuntu kernel: [18481.831185] usb 2-5: SerialNumber: 06E3D5D6
Sep 24 03:22:02 chrubuntu kernel: [18481.832018] input: Generic X-Box pad as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input25
Sep 24 03:22:02 chrubuntu mtp-probe: checking bus 2, device 16: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-5"
Sep 24 03:22:02 chrubuntu mtp-probe: bus: 2, device: 16 was not an MTP device
Sep 24 03:22:03 chrubuntu kernel: [18482.406082] usb 2-5: USB disconnect, device number 16
Sep 24 03:22:04 chrubuntu kernel: [18483.290320] usb 2-5: new full-speed USB device number 17 using xhci_hcd
Sep 24 03:22:04 chrubuntu kernel: [18483.311047] usb 2-5: New USB device found, idVendor=0e6f, idProduct=011f
Sep 24 03:22:04 chrubuntu kernel: [18483.311056] usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Sep 24 03:22:04 chrubuntu kernel: [18483.311062] usb 2-5: Product: Rock Candy Gamepad for Xbox 360
Sep 24 03:22:04 chrubuntu kernel: [18483.311066] usb 2-5: Manufacturer: Performance Designed Products
Sep 24 03:22:04 chrubuntu kernel: [18483.311070] usb 2-5: SerialNumber: 06E3D5D6
Sep 24 03:22:04 chrubuntu kernel: [18483.311868] input: Generic X-Box pad as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input26
Sep 24 03:22:04 chrubuntu mtp-probe: checking bus 2, device 17: "/sys/devices/pci0000:00/0000:00:14.0/usb2/2-5"
Sep 24 03:22:04 chrubuntu mtp-probe: bus: 2, device: 17 was not an MTP device
Sep 24 03:23:57 chrubuntu kernel: [18596.888125] ath: phy0: Failed to stop TX DMA, queues=0x001!
Sep 24 03:41:57 chrubuntu wpa_supplicant[884]: message repeated 28 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 03:42:12 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 03:43:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 03:55:16 chrubuntu kernel: [20475.630413] usb 2-5: USB disconnect, device number 17
Sep 24 04:08:52 chrubuntu kernel: [21290.600212] perf samples too long (5005 > 5000), lowering kernel.perf_event_max_sample_rate to 25000
Sep 24 04:17:01 chrubuntu CRON[7765]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Sep 24 04:41:57 chrubuntu wpa_supplicant[884]: message repeated 29 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 04:42:07 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 04:43:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 05:17:01 chrubuntu CRON[7805]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Sep 24 05:41:57 chrubuntu wpa_supplicant[884]: message repeated 29 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 05:42:05 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 05:43:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 06:17:01 chrubuntu CRON[7848]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Sep 24 06:17:57 chrubuntu wpa_supplicant[884]: message repeated 17 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 06:18:48 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-DISCONNECTED bssid=c8:d7:19:b5:73:74 reason=4 locally_generated=1
Sep 24 06:10:06 chrubuntu NetworkManager[833]: message repeated 48 times: [ <warn> nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted]
Sep 24 06:18:48 chrubuntu NetworkManager[833]: <warn> Connection disconnected (reason -4)
Sep 24 06:18:48 chrubuntu kernel: [29085.706795] cfg80211: Calling CRDA to update world regulatory domain
Sep 24 06:18:48 chrubuntu NetworkManager[833]: <info> (wlan0): supplicant interface state: completed -> disconnected
Sep 24 06:18:48 chrubuntu kernel: [29085.731204] cfg80211: World regulatory domain updated:
Sep 24 06:18:48 chrubuntu kernel: [29085.731209] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 24 06:18:48 chrubuntu kernel: [29085.731213] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 24 06:18:48 chrubuntu kernel: [29085.731216] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 24 06:18:48 chrubuntu kernel: [29085.731218] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 24 06:18:48 chrubuntu kernel: [29085.731220] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 24 06:18:48 chrubuntu kernel: [29085.731222] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 24 06:18:48 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 06:18:48 chrubuntu NetworkManager[833]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Sep 24 06:18:52 chrubuntu wpa_supplicant[884]: wlan0: SME: Trying to authenticate with c8:d7:19:b5:73:74 (SSID='dramakids' freq=2462 MHz)
Sep 24 06:18:52 chrubuntu kernel: [29089.232152] wlan0: authenticate with c8:d7:19:b5:73:74
Sep 24 06:18:52 chrubuntu wpa_supplicant[884]: wlan0: Trying to associate with c8:d7:19:b5:73:74 (SSID='dramakids' freq=2462 MHz)
Sep 24 06:18:52 chrubuntu kernel: [29089.252258] wlan0: send auth to c8:d7:19:b5:73:74 (try 1/3)
Sep 24 06:18:52 chrubuntu kernel: [29089.254285] wlan0: authenticated
Sep 24 06:18:52 chrubuntu NetworkManager[833]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Sep 24 06:18:52 chrubuntu kernel: [29089.257479] wlan0: associate with c8:d7:19:b5:73:74 (try 1/3)
Sep 24 06:18:52 chrubuntu NetworkManager[833]: <info> (wlan0): supplicant interface state: authenticating -> associating
Sep 24 06:18:52 chrubuntu wpa_supplicant[884]: wlan0: Associated with c8:d7:19:b5:73:74
Sep 24 06:18:52 chrubuntu kernel: [29089.261558] wlan0: RX AssocResp from c8:d7:19:b5:73:74 (capab=0x11 status=0 aid=1)
Sep 24 06:18:52 chrubuntu kernel: [29089.261600] wlan0: associated
Sep 24 06:18:52 chrubuntu NetworkManager[833]: <info> (wlan0): supplicant interface state: associating -> associated
Sep 24 06:18:52 chrubuntu NetworkManager[833]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Sep 24 06:18:52 chrubuntu wpa_supplicant[884]: wlan0: WPA: Key negotiation completed with c8:d7:19:b5:73:74 [PTK=CCMP GTK=TKIP]
Sep 24 06:18:52 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-CONNECTED - Connection to c8:d7:19:b5:73:74 completed [id=0 id_str=]
Sep 24 06:18:52 chrubuntu NetworkManager[833]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Sep 24 06:19:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 06:25:01 chrubuntu CRON[7854]: (root) CMD (test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ))
Sep 24 06:41:57 chrubuntu wpa_supplicant[884]: message repeated 11 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 06:42:02 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 06:43:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 07:02:07 chrubuntu NetworkManager[833]: <warn> nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted
Sep 24 07:17:01 chrubuntu CRON[7882]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Sep 24 07:30:01 chrubuntu CRON[7889]: (root) CMD (start -q anacron ||
Sep 24 07:30:01 chrubuntu anacron[7892]: Anacron 2.3 started on 2014-09-24
Sep 24 07:30:01 chrubuntu anacron[7892]: Normal exit (0 jobs run)
Sep 24 07:41:57 chrubuntu wpa_supplicant[884]: message repeated 29 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 07:42:01 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 07:43:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 08:17:01 chrubuntu CRON[7920]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Sep 24 08:41:57 chrubuntu wpa_supplicant[884]: message repeated 29 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 08:41:59 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 08:42:02 chrubuntu wpa_supplicant[884]: message repeated 2 times: [ wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]]
Sep 24 08:43:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 08:55:57 chrubuntu wpa_supplicant[884]: message repeated 6 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 08:56:46 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-DISCONNECTED bssid=c8:d7:19:b5:73:74 reason=4 locally_generated=1
Sep 24 08:48:07 chrubuntu NetworkManager[833]: message repeated 11 times: [ <warn> nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted]
Sep 24 08:56:46 chrubuntu NetworkManager[833]: <warn> Connection disconnected (reason -4)
Sep 24 08:56:46 chrubuntu kernel: [38562.091193] cfg80211: Calling CRDA to update world regulatory domain
Sep 24 08:56:46 chrubuntu NetworkManager[833]: <info> (wlan0): supplicant interface state: completed -> disconnected
Sep 24 08:56:46 chrubuntu kernel: [38562.097468] cfg80211: World regulatory domain updated:
Sep 24 08:56:46 chrubuntu kernel: [38562.097473] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Sep 24 08:56:46 chrubuntu kernel: [38562.097476] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 24 08:56:46 chrubuntu kernel: [38562.097478] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 24 08:56:46 chrubuntu kernel: [38562.097480] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Sep 24 08:56:46 chrubuntu kernel: [38562.097482] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 24 08:56:46 chrubuntu kernel: [38562.097484] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Sep 24 08:56:46 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 08:56:46 chrubuntu NetworkManager[833]: <info> (wlan0): supplicant interface state: disconnected -> scanning
Sep 24 08:56:49 chrubuntu kernel: [38565.623001] wlan0: authenticate with c8:d7:19:b5:73:74
Sep 24 08:56:49 chrubuntu wpa_supplicant[884]: wlan0: SME: Trying to authenticate with c8:d7:19:b5:73:74 (SSID='dramakids' freq=2462 MHz)
Sep 24 08:56:50 chrubuntu NetworkManager[833]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Sep 24 08:56:50 chrubuntu kernel: [38565.639373] wlan0: send auth to c8:d7:19:b5:73:74 (try 1/3)
Sep 24 08:56:50 chrubuntu kernel: [38565.641411] wlan0: authenticated
Sep 24 08:56:50 chrubuntu wpa_supplicant[884]: wlan0: Trying to associate with c8:d7:19:b5:73:74 (SSID='dramakids' freq=2462 MHz)
Sep 24 08:56:50 chrubuntu NetworkManager[833]: <info> (wlan0): supplicant interface state: authenticating -> associating
Sep 24 08:56:50 chrubuntu kernel: [38565.645791] wlan0: associate with c8:d7:19:b5:73:74 (try 1/3)
Sep 24 08:56:50 chrubuntu wpa_supplicant[884]: wlan0: Associated with c8:d7:19:b5:73:74
Sep 24 08:56:50 chrubuntu kernel: [38565.650114] wlan0: RX AssocResp from c8:d7:19:b5:73:74 (capab=0x11 status=0 aid=1)
Sep 24 08:56:50 chrubuntu kernel: [38565.650156] wlan0: associated
Sep 24 08:56:50 chrubuntu NetworkManager[833]: <info> (wlan0): supplicant interface state: associating -> associated
Sep 24 08:56:50 chrubuntu NetworkManager[833]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Sep 24 08:56:50 chrubuntu wpa_supplicant[884]: wlan0: WPA: Key negotiation completed with c8:d7:19:b5:73:74 [PTK=CCMP GTK=TKIP]
Sep 24 08:56:50 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-CONNECTED - Connection to c8:d7:19:b5:73:74 completed [id=0 id_str=]
Sep 24 08:56:50 chrubuntu NetworkManager[833]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Sep 24 08:57:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 09:06:07 chrubuntu NetworkManager[833]: <warn> nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted
Sep 24 09:17:01 chrubuntu CRON[7955]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Sep 24 09:39:57 chrubuntu wpa_supplicant[884]: message repeated 21 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 09:41:57 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 09:41:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 09:41:59 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 09:43:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 10:17:01 chrubuntu CRON[7992]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Sep 24 10:39:57 chrubuntu wpa_supplicant[884]: message repeated 28 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 10:41:51 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 10:41:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 11:00:35 chrubuntu dhclient: DHCPREQUEST of 192.168.1.103 on wlan0 to 192.168.1.1 port 67 (xid=0x2f33b6d7)
Sep 24 11:00:35 chrubuntu dhclient: DHCPACK of 192.168.1.103 from 192.168.1.1
Sep 24 11:00:35 chrubuntu dhclient: bound to 192.168.1.103 -- renewal in 36513 seconds.
Sep 24 10:52:07 chrubuntu NetworkManager[833]: message repeated 7 times: [ <warn> nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted]
Sep 24 11:00:35 chrubuntu NetworkManager[833]: <info> (wlan0): DHCPv4 state changed reboot -> renew
Sep 24 11:00:35 chrubuntu NetworkManager[833]: <info> address 192.168.1.103
Sep 24 11:00:35 chrubuntu NetworkManager[833]: <info> prefix 24 (255.255.255.0)
Sep 24 11:00:35 chrubuntu NetworkManager[833]: <info> gateway 192.168.1.1
Sep 24 11:00:35 chrubuntu NetworkManager[833]: <info> nameserver '209.18.47.61'
Sep 24 11:00:35 chrubuntu NetworkManager[833]: <info> nameserver '209.18.47.62'
Sep 24 11:00:35 chrubuntu NetworkManager[833]: <info> nameserver '192.168.1.1'
Sep 24 11:00:35 chrubuntu NetworkManager[833]: <info> domain name 'triad.rr.com'
Sep 24 11:00:35 chrubuntu dbus[470]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Sep 24 11:00:35 chrubuntu dbus[470]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Sep 24 11:08:07 chrubuntu NetworkManager[833]: <warn> nl_recvmsgs() error: (-33) Dump inconsistency detected, interrupted
Sep 24 11:17:01 chrubuntu CRON[8048]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Sep 24 11:39:57 chrubuntu wpa_supplicant[884]: message repeated 29 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 11:41:49 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 11:41:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 12:17:01 chrubuntu CRON[8079]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Sep 24 12:39:57 chrubuntu wpa_supplicant[884]: message repeated 29 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 12:41:49 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 12:41:50 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 12:41:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 13:17:01 chrubuntu CRON[8111]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Sep 24 13:39:57 chrubuntu wpa_supplicant[884]: message repeated 29 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 13:41:48 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 13:41:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 14:17:01 chrubuntu CRON[8142]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Sep 24 14:39:57 chrubuntu wpa_supplicant[884]: message repeated 29 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 14:41:46 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 14:41:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED
Sep 24 15:17:01 chrubuntu CRON[8185]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Sep 24 15:39:57 chrubuntu wpa_supplicant[884]: message repeated 29 times: [ wlan0: CTRL-EVENT-SCAN-STARTED ]
Sep 24 15:41:45 chrubuntu wpa_supplicant[884]: wlan0: WPA: Group rekeying completed with c8:d7:19:b5:73:74 [GTK=TKIP]
Sep 24 15:41:57 chrubuntu wpa_supplicant[884]: wlan0: CTRL-EVENT-SCAN-STARTED

 

[blackneos940]

Ugh..... How can you guys even sift THROUGH that.........? D: Thank you, though.....

 

[DevynCJohnson]

I am not done looking yet, but I see some odd behavior. USB device 3 is disconnected near the end of the first log post of yours. After the USB device is disconnected, init is killed. Afterwards, the system seems to continue and then your primary/first wireless device (wlan0) tries to use IPv6.

Are you on a network using IPv6? What device is USB #3 (try running "lsusb" on a working OS on the same hardware)? Do live CDs work? Is the distro installed on the USB or does the USB device contain an installer? Did you unplug a USB device or turn-off/disable Wifi, the keyboard, touchpad, webcam, mic, etc.? The keyboard, webcam, etc. are internally attached to the USB bus, so your system reported 12 (yes, tweleve) USB devices. Is a printer plugged in? Is the live-USB device "locked"? Does the USB device with the distro support high-traffic?

The logs indicate that you are booting from sda7 and that sda has 12 partitions (sda1-sda12). Is this correct? If so, is sda7 a logical or primary partition? Have you tried using GPT instead of MBR?

 

[DevynCJohnson]

Do you have problems with your Wifi?

When you boot up, is the Xbox controller plugged in or do you plug it in after booting?

The system logs are standardized, so this is our native language. Sifting through logs is easy for us.

 

[ryanvade]

Ugh..... How can you guys even sift THROUGH that.........? D: Thank you, though.....

http://slexy.org/view/s2vmZhAce7

Please use a pastebin when possible.

 

[blackneos940]

Ah, sorry guys..... Been moving, so no Internet..... And someone else needs to use the only connection we have..... But, really quick, turns out that the tiny SSD, only 16gb, ran out of space..... At least, that's what causes the FREEZING at Login.... Now the occasional Touchpad issues with certain updates......? Different story althogether..... : D

 

[blackneos940]

http://slexy.org/view/s2vmZhAce7

Please use a pastebin when possible.

Eh..... D: Sorry..... D:

 

[ryanvade]

Eh..... D: Sorry..... D:

No problem.

 

[blackneos940]

No problem.

 

[blackneos940]

Do you have problems with your Wifi?

When you boot up, is the Xbox controller plugged in or do you plug it in after booting?

The system logs are standardized, so this is our native language. Sifting through logs is easy for us.

Okay..... Wi-Fi is up, so I can reply again..... Though the freeze issue seems to be the result of having too little space, like, 0 KB of space, it happened whether the XBOX Controller was plugged already in or not.....

 

[blackneos940]

I am not done looking yet, but I see some odd behavior. USB device 3 is disconnected near the end of the first log post of yours. After the USB device is disconnected, init is killed. Afterwards, the system seems to continue and then your primary/first wireless device (wlan0) tries to use IPv6.

Are you on a network using IPv6? What device is USB #3 (try running "lsusb" on a working OS on the same hardware)? Do live CDs work? Is the distro installed on the USB or does the USB device contain an installer? Did you unplug a USB device or turn-off/disable Wifi, the keyboard, touchpad, webcam, mic, etc.? The keyboard, webcam, etc. are internally attached to the USB bus, so your system reported 12 (yes, tweleve) USB devices. Is a printer plugged in? Is the live-USB device "locked"? Does the USB device with the distro support high-traffic?

The logs indicate that you are booting from sda7 and that sda has 12 partitions (sda1-sda12). Is this correct? If so, is sda7 a logical or primary partition? Have you tried using GPT instead of MBR?

Hm..... So there IS an issue........ Well, I have managed to boot Debian, Puppy, and OTHER small Distros via USB (not much RAM in Acer's Chromebooks, I guess.....) Let me try to run that command on THIS OS, Kubuntu, and post it here..... If it's too long, it'll be on Pastebin..... Also, I was using my neighbor's Wi-Fi for a while, but now that we have a HOME Network set up..... It's, let me see now....... Wait..... How do you find that out.....? I don't know, to tell you the truth.....

I did the "lsusb" thing in ROXterm.... I LOVE downloading and using multiple Terminals..... XD

user@chrubuntu:~$ lsusb
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 004: ID 0489:e056 Foxconn / Hon Hai
Bus 002 Device 002: ID 1bcf:2c67 Sunplus Innovation Technology Inc.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
user@chrubuntu:~$

And no.... So far as I know, I didn't deactivate any USB Device..... But... Wow... :O I had no IDEA that all those Devices are USBs, though..... :O And also, how do I tell if a LiveUSB is "locked".....?

 

[DevynCJohnson]

And also, how do I tell if a LiveUSB is "locked".....?

I am not sure. Sorry.

 

[blackneos940]

I am not sure. Sorry.

Oh..... Ok..... I'm getting a new SSD soon..... Hope I don't ruin things by swapping SSDs like that time with my PSP.....