Testers for next inxi (pinxi) - USB, Bluetooth, USB upgrades

I think I found it, L2 was simply never assigned if missing, and this would basically never trigger except for ARM cpus without L2, or BSDs that did not get L2 detected.

With latest patch this 'should' be working, it was basically an assumption based on the fact that essentially all intel/amd type cpus report their their L2 in /proc/cpuinfo, so this tiny assumption had remained hidden for all these years. I don't see anywhere where L3 was assigned to L2 however, so I think that's maybe not related. Basically for most cpus on linux, L2 i s always available, and usually but not always, L1 and L3 only came from dmidecode, with the exception of Elbrus cpus, which provide all three variants, actually more, since they have several L1 types.

There was a further bsd only condition that triggered because the more advanced logic used for linux can't work without all the required data, so i t had a simpler default, which resulted in for stuff that didn't have L1/2/3 cache data in dmesg.boot or sysctl output, it would never show the data, and I never found this because testing in vm's doesn't give much dmi data, if any.
 


Almost my bedtime, but tomorrow I'll run through whichever you prefer: pinxi -zyv8? Or the debug command? Or something else? After pinxi -U, of course! :)
 
Probably one last full set of -yzv8 to make sure I'm not missing anything should do it I think, Note that for freebsd/dragonfly, cpu L1/2/3 cache data will only show if root since it comes from dmidecode, but that's fine, the trick was to track down the missing cpu cache data for these systems. I modified it to if bsd, then always try the cpu data from dmidecode, if no other cache data was found, that seems safest.
 
Last edited:
OK, all updated to pinxi-107, and all run as root....
Code: 
System:
  Kernel: FreeBSD 12.2-RELEASE-p4 amd64 bits: 64 compiler: clang v: 10.0.1 
  Console: N/A OS: FreeBSD 12.2-RELEASE-p4 
Machine:
  Type: Notebook Mobo: ASUSTeK model: X401U v: 1.0 serial: <filter> 
  UEFI: American Megatrends v: X401U.204 rev: 4.6 date: 05/08/2012 
  rom size: 1 MB 
Memory:
  RAM: total: 3.57 GiB used: 395.9 MiB (10.8%) 
  Array-1: capacity: 4 GiB slots: 2 EC: None max-module-size: 4 GiB note: est. 
  Device-1: DIMM 0 size: 4 GiB speed: spec: 1333 MT/s actual: 533 MT/s 
  type: DDR3 detail: synchronous unbuffered (unregistered) bus-width: 64 bits 
  total: 64 bits manufacturer: Elpida part-no: Not Specified serial: N/A 
PCI Slots:
  Slot: 0 type: x16 PCI Express J6B2 status: In Use length: Long 
  Slot: 1 type: x1 PCI Express J6B1 status: In Use length: Short 
  Slot: 2 type: x1 PCI Express J6D1 status: In Use length: Short 
CPU:
  Info: Dual Core model: AMD E1-1200 APU with Radeon HD Graphics socket: P0 
  bits: 64 type: MCP arch: Bobcat family: 14 (20) model-id: 2 stepping: N/A 
  microcode: 500F20 cache: L1: 128 KiB L2: 1024 KiB 
  Speed: 1397 MHz min/max: 777/1400 MHz base/boost: 1400/1400 volts: 1.4 V 
  ext-clock: 100 MHz Core speeds (MHz): No speed data found for 2 cores. 
  Features: abm apic clflush cmov cmp cr8 cx16 cx8 de extapic ffxsr fpu fxsr 
  htt ibs lahf lm mas mca mce mmx mmx+ mon msr mtrr nx pae page1gb pat pge 
  popcnt prefetch pse pse36 rdtscp sep skinit sse sse2 sse3 sse4a ssse3 svm 
  syscall tsc vme wdt 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: AMD Wrestler [Radeon HD 7310] driver: vgapci bus-ID: 0:0:1.0 
  chip-ID: 1002:9809 class-ID: 0300 
  Device-2: Azurewave USB 2.0 UVC VGA WebCam type: USB driver: ugen 
  bus-ID: 4-4.2:2 chip-ID: N/A 
  Display: server: X.org 1.20.9 driver: loaded: vesa unloaded: modesetting 
  alternate: ati tty: 80x30 
  Message: Advanced graphics data unavailable in console for root. 
Audio:
  Device-1: AMD Wrestler HDMI Audio driver: hdac bus-ID: 0:0:1.1 
  chip-ID: 1002:1314 class-ID: 0403 
  Device-2: AMD FCH Azalia driver: hdac bus-ID: 0:0:20.2 chip-ID: 1022:780d 
  class-ID: 0403 
  Sound Server-1: OSS v: 2009061500 running: yes 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: re 
  port: N/A bus-ID: 0:6:0.0 chip-ID: 10ec:8168 class-ID: 0200 
  IF: re0 state: active speed: 1000baseT duplex: full-duplex mac: <filter> 
  IP v4: <filter> scope: N/A broadcast: <filter> 
  Device-2: Ralink RT5390 Wireless 802.11n 1T/1R PCIe driver: ral 
  bus-ID: 0:7:0.0 chip-ID: 1814:5390 class-ID: 0280 
  WAN IP: <filter> 
Bluetooth:
  Message: No Bluetooth data was found. 
Logical:
  Message: No BSD support for LVM data. 
RAID:
  Message: No RAID data was found. 
Drives:
  Local Storage: total: 291.1 GiB used: 6.33 GiB (2.2%) 
  ID-1: /dev/ada0 vendor: Seagate model: ST320LT012-9WS14C 0001SDM1 
  family: Laptop HDD size: 291.1 GiB block-size: physical: 4096 B 
  logical: 512 B sata: 2.6 speed: 300MB/s rotation: 5400 rpm serial: <filter> 
  rev: 0001SDM1 temp: 26 C 
  SMART: yes state: enabled health: PASSED on: 159d 2h cycles: 2384 
  read: 1.62 TiB written: 616.04 GiB Pre-Fail: attribute: Spin_Retry_Count 
  value: 100 worst: 100 threshold: 97 
  Optical Report: No Optical or Floppy data found for this BSD system. 
Partition:
  ID-1: / size: 284.77 GiB used: 6.33 GiB (2.2%) fs: ufs block-size: 512 B 
  dev: /dev/ada0s1a label: N/A uuid: N/A 
Swap:
  ID-1: swap-1 type: partition size: 4 GiB used: 0 KiB (0.0%) 
  dev: /dev/ada0s1b label: N/A uuid: N/A 
Unmounted:
  Message: No Unmounted partition data found for this BSD system. 
USB:
  Hub-1: 0-0.1:1 info: 0x1022 XHCI root HUB ports: N/A rev: 3.0 speed: 5 Gb/s 
  chip-ID: N/A 
  Hub-2: 1-1.1:1 info: AMD OHCI root HUB ports: N/A rev: 1.1 speed: 12 Mb/s 
  chip-ID: N/A 
  Hub-3: 2-2.1:1 info: AMD EHCI root HUB ports: N/A rev: 2.0 speed: 480 Mb/s 
  chip-ID: N/A 
  Hub-4: 3-3.1:1 info: AMD OHCI root HUB ports: N/A rev: 1.1 speed: 12 Mb/s 
  chip-ID: N/A 
  Hub-5: 4-4.1:1 info: AMD EHCI root HUB ports: N/A rev: 2.0 speed: 480 Mb/s 
  chip-ID: N/A 
  Device-1: 4-4.2:2 info: Azurewave USB 2.0 UVC VGA WebCam type: Video 
  driver: ugen rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: N/A 
Sensors:
  Platform: No OS support. Is a comparable Freebsd sensors tool available? 
Repos:
  Packages: pkg: 3 
  BSD ports server: /etc/portsnap.conf 
  1: portsnap.FreeBSD.org
  FreeBSD update server: /etc/freebsd-update.conf 
  1: update.FreeBSD.org
  BSD enabled pkg servers in: /etc/pkg/FreeBSD.conf 
  1: pkg+http://pkg.FreeBSD.org/$ABI/quarterly
Processes:
  CPU top: 5 of 52 
  1: cpu: 195.5% command: [idle] pid: 11 mem: 0.03 MiB (0.0%) 
  2: cpu: 9.6% command: pinxi started by: perl pid: 949 mem: 27.9 MiB (0.8%) 
  3: cpu: 0.0% command: [kernel] pid: 0 mem: 0.31 MiB (0.0%) 
  4: cpu: 0.0% command: init pid: 1 mem: 0.98 MiB (0.0%) 
  5: cpu: 0.0% command: [crypto] pid: 2 mem: 0.02 MiB (0.0%) 
  Memory top: 5 of 52 
  1: mem: 27.9 MiB (0.8%) command: pinxi started by: perl pid: 949 cpu: 9.6% 
  2: mem: 22.1 MiB (0.6%) command: polkitd pid: 734 cpu: 0.0% 
  3: mem: 9.34 MiB (0.3%) command: hald pid: 840 cpu: 0.0% 
  4: mem: 8.11 MiB (0.2%) command: sshd pid: 775 cpu: 0.0% 
  5: mem: 7.30 MiB (0.2%) command: console-kit-daemon pid: 732 cpu: 0.0% 
Info:
  Processes: 52 Uptime: 3m Init: init (BSD) v: N/A tool: service Compilers: 
  gcc: N/A clang: 10.0.1 Shell: csh (login) v: 6.21.00 pinxi: 3.3.01-107
Code: 
System:
  Kernel: FreeBSD 13.0-RC2 amd64 bits: 64 compiler: clang v: 11.0.1 
  Console: N/A OS: FreeBSD 13.0-RC2 
Machine:
  Type: Notebook System: Hewlett-Packard product: HP Pavilion 11 x360 PC 
  v: 0975100002405F00010420180 serial: <filter> Chassis: serial: N/A 
  Mobo: Hewlett-Packard model: 2209 v: 57.36 serial: <filter> BIOS: Insyde 
  v: F.14 rev: 15.20 date: 07/28/2014 rom size: 4608 kB 
Battery:
  ID-1: BAT0 charge: N/A condition: N/A/29.0 Wh volts: N/A min: 7.6 
  model: 33-42 PL02029 type: LION serial: <filter> status: N/A 
  location: Primary 
Memory:
  RAM: total: 3.85 GiB used: 422.9 MiB (10.7%) 
  Array-1: capacity: 8 GiB slots: 1 EC: None max-module-size: 8 GiB note: est. 
  Device-1: Bottom size: 4 GiB speed: 1333 MT/s type: DDR3 detail: synchronous 
  bus-width: 64 bits total: 64 bits manufacturer: Samsung 
  part-no: M471B5173QH0-YK0 serial: <filter> 
PCI Slots:
  Slot: 0 type: x4 PCI Express x4 J5C1 status: Available length: Other 
  Slot: 0 type: x1 PCI Express x1 J4B3 status: Available length: Other 
  Slot: 0 type: x1 PCI Express x1 J6C1 status: Available length: Other 
  Slot: 0 type: x1 PCI Express x1 J6D1 status: Available length: Other 
CPU:
  Info: Quad Core model: Intel Pentium N3540 bits: 64 type: MCP 
  arch: Silvermont family: 6 model-id: 37 (55) stepping: 8 microcode: 30678 
  cache: L1: 56 KiB L2: 1024 KiB 
  Speed: 2166 MHz min/max: 498/2159 MHz base/boost: 2175/2656 volts: 0.9 V 
  ext-clock: 83 MHz Core speeds (MHz): No speed data found for 4 cores. 
  Features: acpi apic clflush cmov cx16 cx8 de ds_cpl dtes64 dts erms est fpu 
  fxsr htt lahf lm mca mce mmx mon movbe msr mtrr nfpusg nx pae pat pbe 
  pclmulqdq pdcm pge popcnt prefetch pse pse36 rdrand rdtscp sep smep ss sse 
  sse2 sse3 sse4.1 sse4.2 ssse3 syscall tm tm2 tsc tscadj tscdlt vme vmx xtpr 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display 
  driver: vgapci bus-ID: 0:0:2.0 chip-ID: 8086:0f31 class-ID: 0300 
  Display: server: No display server data found. Headless machine? tty: 97x27 
  Message: Advanced graphics data unavailable in console for root. 
Audio:
  Device-1: Intel Atom Processor Z36xxx/Z37xxx Series High Definition Audio 
  driver: hdac bus-ID: 0:0:27.0 chip-ID: 8086:0f04 class-ID: 0403 
  Sound Server-1: OSS v: 2009061500 running: yes 
Network:
  Device-1: Ralink RT3290 Wireless 802.11n 1T/1R PCIe driver: none 
  bus-ID: 0:2:0.0 chip-ID: 1814:3290 class-ID: 0280 
  Device-2: Realtek RTL810xE PCI Express Fast Ethernet driver: re port: N/A 
  bus-ID: 0:4:0.0 chip-ID: 10ec:8136 class-ID: 0200 
  IF: re0 state: active speed: 100baseTX duplex: full-duplex mac: <filter> 
  IP v4: <filter> scope: N/A broadcast: <filter> 
  WAN IP: <filter> 
Bluetooth:
  Device-1: Ralink RT3290 Bluetooth driver: none bus-ID: 0:2:0.1 
  chip-ID: 1814:3298 class-ID: 0d11 
  Report: No OS support. Is a comparable bluetooth tool available? 
Logical:
  Message: No BSD support for LVM data. 
RAID:
  Device-1: zroot type: zfs status: ONLINE level: linear size: 460 GiB 
  free: 459 GiB allocated: 1.02 GiB 
  Components: Online: 
  1: ada0p4 size: 463.51 GiB 
Drives:
  Local Storage: total: 454.85 GiB used: 1.02 GiB (0.2%) 
  SMART Message: Required tool smartctl not installed. Check --recommends 
  ID-1: /dev/ada0 vendor: Toshiba model: MQ01ABF050 AM0P2C size: 454.85 GiB 
  speed: 300MB/s serial: <filter> 
  Optical Report: No Optical or Floppy data found for this BSD system. 
Partition:
  ID-1: / size: 445.62 GiB used: 1.01 GiB (0.2%) fs: zfs 
  logical: zroot/ROOT/default label: N/A uuid: N/A 
  ID-2: /boot/efi size: 259.9 MiB used: 1.8 MiB (0.7%) fs: msdosfs 
  block-size: 512 B dev: /dev/ada0p1 label: efiboot0 
  uuid: b755831a-8408-11eb-a3ed-3464a9c439eb 
  ID-3: /tmp size: 444.61 GiB used: 96 KiB (0.0%) fs: zfs logical: zroot/tmp 
  label: N/A uuid: N/A 
  ID-4: /usr/home size: 444.61 GiB used: 128 KiB (0.0%) fs: zfs 
  logical: zroot/usr/home label: N/A uuid: N/A 
  ID-5: /usr/ports size: 444.61 GiB used: 96 KiB (0.0%) fs: zfs 
  logical: zroot/usr/ports label: N/A uuid: N/A 
  ID-6: /usr/src size: 444.61 GiB used: 96 KiB (0.0%) fs: zfs 
  logical: zroot/usr/src label: N/A uuid: N/A 
  ID-7: /var/audit size: 444.61 GiB used: 96 KiB (0.0%) fs: zfs 
  logical: zroot/var/audit label: N/A uuid: N/A 
  ID-8: /var/crash size: 444.61 GiB used: 96 KiB (0.0%) fs: zfs 
  logical: zroot/var/crash label: N/A uuid: N/A 
  ID-9: /var/log size: 444.61 GiB used: 164 KiB (0.0%) fs: zfs 
  logical: zroot/var/log label: N/A uuid: N/A 
  ID-10: /var/mail size: 444.61 GiB used: 96 KiB (0.0%) fs: zfs 
  logical: zroot/var/mail label: N/A uuid: N/A 
  ID-11: /var/tmp size: 444.61 GiB used: 96 KiB (0.0%) fs: zfs 
  logical: zroot/var/tmp label: N/A uuid: N/A 
  ID-12: /zroot size: 444.61 GiB used: 96 KiB (0.0%) fs: zfs logical: zroot 
  label: N/A uuid: N/A 
Swap:
  ID-1: swap-1 type: partition size: 2 GiB used: 0 KiB (0.0%) dev: /dev/ada0p3 
  label: N/A uuid: N/A 
Unmounted:
  Message: No Unmounted partition data found for this BSD system. 
USB:
  Hub-1: 0-0.1:1 info: 0x8086 XHCI root HUB ports: N/A rev: 3.0 speed: 5 Gb/s 
  chip-ID: N/A 
  Device-1: 0-0.2:2 info: DECTK019I7C6HM HP Truevision HD type: N/A 
  driver: ugen rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: N/A 
  Hub-2: 0-0.3:3 info: USB 2.0 Hub ports: N/A rev: 2.0 speed: 480 Mb/s 
  power: 100mA chip-ID: 1a40: 
Sensors:
  Platform: No OS support. Is a comparable Freebsd sensors tool available? 
Repos:
  Packages: pkg: 3 
  BSD ports server: /etc/portsnap.conf 
  1: portsnap.FreeBSD.org
  FreeBSD update server: /etc/freebsd-update.conf 
  1: update.FreeBSD.org
  BSD enabled pkg servers in: /etc/pkg/FreeBSD.conf 
  1: pkg+http://pkg.FreeBSD.org/$ABI/quarterly
Processes:
  CPU top: 5 of 49 
  1: cpu: 392.1% command: [idle] pid: 11 mem: 0.06 MiB (0.0%) 
  2: cpu: 0.0% command: [kernel] pid: 0 mem: 5.77 MiB (0.1%) 
  3: cpu: 0.0% command: init pid: 1 mem: 1.09 MiB (0.0%) 
  4: cpu: 0.0% command: [ktls] pid: 2 mem: 0.06 MiB (0.0%) 
  5: cpu: 0.0% command: [crypto] pid: 3 mem: 0.02 MiB (0.0%) 
  Memory top: 5 of 49 
  1: mem: 28.0 MiB (0.7%) command: pinxi started by: perl pid: 1164 cpu: 0.0% 
  2: mem: 8.20 MiB (0.2%) command: sshd pid: 1033 cpu: 0.0% 
  3: mem: 6.99 MiB (0.2%) command: sendmail: pid: 1012 cpu: 0.0% 
  4: mem: 6.06 MiB (0.2%) command: sendmail: pid: 1015 cpu: 0.0% 
  5: mem: 5.77 MiB (0.1%) command: [kernel] pid: 0 cpu: 0.0% 
Info:
  Processes: 49 Uptime: 14m Init: init (BSD) v: N/A tool: service Compilers: 
  gcc: N/A clang: 11.0.1 Shell: csh (login) v: 6.21.00 pinxi: 3.3.01-107
 
And...
Code: 
System:
  Kernel: FreeBSD 12.2-RELEASE-p4 amd64 bits: 64 compiler: clang v: 10.0.1 
  Console: N/A DM: SLiM 1.3.6 OS: NomadBSD base: FreeBSD 12.2-RELEASE-p4 
Machine:
  Type: Desktop System: HP-Pavilion product: NY549AA-ABA p6230y v: N/A 
  serial: <filter> Chassis: Hewlett-Packard serial: N/A 
  Mobo: FOXCONN model: ALOE v: X3 serial: N/A BIOS: American Megatrends 
  v: 5.00 rev: 5.0 date: 08/03/2009 rom size: 1 MB 
Memory:
  RAM: total: 7.71 GiB used: 982.8 MiB (12.4%) 
  Array-1: capacity: 16 GiB slots: 4 EC: None max-module-size: 4 GiB 
  note: est. 
  Device-1: DIMM0 size: 2 GiB speed: 1066 MT/s type: Other detail: synchronous 
  bus-width: 64 bits total: 64 bits manufacturer: Micron 
  part-no: 16JTF25664AZ-1G4F1 serial: <filter> 
  Device-2: DIMM1 size: 2 GiB speed: 1066 MT/s type: Other detail: synchronous 
  bus-width: 64 bits total: 64 bits manufacturer: Micron 
  part-no: 16JTF25664AZ-1G4F1 serial: <filter> 
  Device-3: DIMM2 size: 2 GiB speed: 1066 MT/s type: Other detail: synchronous 
  bus-width: 64 bits total: 64 bits manufacturer: Micron 
  part-no: 16JTF25664AZ-1G4F1 serial: <filter> 
  Device-4: DIMM3 size: 2 GiB speed: 1066 MT/s type: Other detail: synchronous 
  bus-width: 64 bits total: 64 bits manufacturer: Micron 
  part-no: 16JTF25664AZ-1G4F1 serial: <filter> 
PCI Slots:
  Slot: 2 type: x16 PCI Express PCI-E x16 status: Available length: Short 
  Slot: 5 type: x1 PCI Express MINI PCI-E x1 status: Available length: Short 
  Slot: 6 type: x1 PCI Express PCI-E x1 status: Available length: Short 
  Slot: 7 type: x1 PCI Express PCI-E x1 status: Available length: Short 
  Slot: 9 type: x1 PCI Express PCI-E x1 status: Available length: Short 
CPU:
  Info: Quad Core model: AMD Phenom II X4 810 bits: 64 type: MCP arch: K10 
  family: 10 (16) model-id: 4 stepping: 2 microcode: 100F42 cache: L1: 512 KiB 
  L2: 2 MiB L3: 4 MiB 
  Speed: 2593 MHz min/max: 800/2600 MHz base/boost: 2600/2600 volts: 1.5 V 
  ext-clock: 200 MHz Core speeds (MHz): No speed data found for 4 cores. 
  Features: 3dnow! 3dnow!+ abm apic clflush cmov cmp cr8 cx16 cx8 de extapic 
  ffxsr fpu fxsr htt ibs lahf lm mas mca mce mmx mmx+ mon msr mtrr nx osvw pae 
  page1gb pat pge popcnt prefetch pse pse36 rdtscp sep skinit sse sse2 sse3 
  sse4a svm syscall tsc vme wdt 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: AMD RS880 [Radeon HD 4200] driver: vgapci bus-ID: 0:1:5.0 
  chip-ID: 1002:9710 class-ID: 0300 
  Display: server: X.org 1.20.9 compositor: picom v: 8.2 driver: 
  loaded: radeon tty: 240x67 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: AMD SBx00 Azalia driver: hdac bus-ID: 0:0:20.2 chip-ID: 1002:4383 
  class-ID: 0403 
  Sound Server-1: OSS v: 2009061500 running: yes 
  Sound Server-2: PulseAudio v: 13.0 running: yes 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: re 
  port: N/A bus-ID: 0:2:0.0 chip-ID: 10ec:8168 class-ID: 0200 
  IF: re0 state: active speed: 1000baseT duplex: full-duplex mac: <filter> 
  IP v6: <filter> scope: link 
  IP v4: <filter> scope: N/A broadcast: <filter> 
  WAN IP: <filter> 
Bluetooth:
  Message: No Bluetooth data was found. 
Logical:
  Message: No BSD support for LVM data. 
RAID:
  Message: No RAID data was found. 
Drives:
  Local Storage: total: 462.46 GiB used: 17.27 GiB (3.7%) 
  ID-1: /dev/ada0 vendor: Samsung model: SSD 850 EVO 500GB EMT02B6Q 
  family: based SSDs size: 454.85 GiB block-size: physical: 512 B 
  logical: 512 B sata: 3.1 speed: 300MB/s rotation: SSD serial: <filter> 
  rev: EMT02B6Q temp: 27 C 
  SMART: yes state: enabled health: PASSED on: 318d 14h cycles: 1274 
  written: 3.01 TiB 
  ID-2: /dev/da0 vendor: Centon model: DS Pro 8.07 size: 7.61 GiB 
  speed: 40MB/s serial: <filter> 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  ID-3: /dev/da1 vendor: Generic model: Compact Flash 1.00 size: N/A 
  speed: 40MB/s serial: <filter> 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  ID-4: /dev/da2 vendor: Generic model: SM/xD-Picture 1.00 size: N/A 
  speed: 40MB/s serial: <filter> 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  ID-5: /dev/da3 vendor: Generic model: SD/MMC 1.00 size: N/A speed: 40MB/s 
  serial: <filter> 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  ID-6: /dev/da4 vendor: Generic model: MS/MS-Pro 1.00 size: N/A speed: 40MB/s 
  serial: <filter> 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  Optical-1: /dev/cd0 vendor: hp model: DVD-RAM GH40L rev: RB0A 
  serial: <filter> dev-links: N/A 
  Features: speed: 150MB/s multisession: N/A audio: N/A dvd: yes 
  rw: cd-r,dvd-ram state: Medium not present, tray closed 
Partition:
  ID-1: / size: 3.58 GiB used: 3.22 GiB (89.9%) fs: ufs dev: /dev/nomadroot 
  label: N/A uuid: N/A 
  ID-2: /compat size: 4.05 GiB used: 269.4 MiB (6.5%) fs: nullfs 
  logical: /data/compat label: N/A uuid: N/A 
  ID-3: /data size: 4.05 GiB used: 269.4 MiB (6.5%) fs: ufs 
  dev: /dev/nomaddata label: N/A uuid: N/A 
  ID-4: /unionfs/usr/local size: 6.45 GiB used: 6.02 GiB (93.3%) fs: ufs 
  dev: /dev/md0.uzip label: N/A uuid: N/A 
  ID-5: /usr/local size: 10.51 GiB used: 6.72 GiB (63.9%) fs: fusefs 
  dev: /dev/fuse label: N/A uuid: N/A 
  ID-6: /usr/ports size: 4.05 GiB used: 269.4 MiB (6.5%) fs: nullfs 
  logical: /data/usr/ports label: N/A uuid: N/A 
  ID-7: /var/db size: 4.05 GiB used: 269.4 MiB (6.5%) fs: nullfs 
  logical: /data/var/db label: N/A uuid: N/A 
  ID-8: /var/tmp size: 4.05 GiB used: 269.4 MiB (6.5%) fs: nullfs 
  logical: /data/var/tmp label: N/A uuid: N/A 
Swap:
  Alert: No Swap data was found. 
Unmounted:
  Message: No Unmounted partition data found for this BSD system. 
USB:
  Hub-1: 0-0.1:1 info: ATI OHCI root HUB ports: N/A rev: 1.1 speed: 12 Mb/s 
  chip-ID: N/A 
  Hub-2: 1-1.1:1 info: ATI OHCI root HUB ports: N/A rev: 1.1 speed: 12 Mb/s 
  chip-ID: N/A 
  Hub-3: 2-2.1:1 info: ATI EHCI root HUB ports: N/A rev: 2.0 speed: 480 Mb/s 
  chip-ID: N/A 
  Device-1: 2-2.2:2 info: CENTON DS Pro type: N/A driver: ugen rev: 2.0 
  speed: 480 Mb/s power: 100mA chip-ID: N/A 
  Device-2: 2-2.3:3 info: Generic USB2.0-CRW type: N/A driver: ugen rev: 2.0 
  speed: 480 Mb/s power: 500mA chip-ID: N/A 
  Hub-4: 3-3.1:1 info: ATI OHCI root HUB ports: N/A rev: 1.1 speed: 12 Mb/s 
  chip-ID: N/A 
  Device-1: 3-3.2:2 info: CHICONY HP USB Multimedia Keyboard type: HID 
  driver: ugen rev: 1.0 speed: 1.5 Mb/s power: 100mA chip-ID: N/A 
  Hub-5: 4-4.1:1 info: ATI OHCI root HUB ports: N/A rev: 1.1 speed: 12 Mb/s 
  chip-ID: N/A 
  Hub-6: 5-5.1:1 info: ATI EHCI root HUB ports: N/A rev: 2.0 speed: 480 Mb/s 
  chip-ID: N/A 
  Hub-7: 6-6.1:1 info: ATI OHCI root HUB ports: N/A rev: 1.1 speed: 12 Mb/s 
  chip-ID: N/A 
  Device-1: 6-6.2:2 info: Microsoft 3-Button Mouse with IntelliEye type: HID 
  driver: ugen rev: 1.0 speed: 1.5 Mb/s power: 100mA chip-ID: N/A 
Sensors:
  Platform: No OS support. Is a comparable Freebsd sensors tool available? 
Repos:
  Packages: pkg: 3 
  BSD ports server: /etc/portsnap.conf 
  1: portsnap.FreeBSD.org
  FreeBSD update server: /etc/freebsd-update.conf 
  1: update.FreeBSD.org
  BSD enabled pkg servers in: /etc/pkg/FreeBSD.conf 
  1: pkg+http://pkg.FreeBSD.org/$ABI/quarterly
Processes:
  CPU top: 5 of 79 
  1: cpu: 394.9% command: [idle] pid: 11 mem: 0.06 MiB (0.0%) 
  2: cpu: 0.2% command: unionfs pid: 263 mem: 14.7 MiB (0.2%) 
  3: cpu: 0.1% command: [kernel] pid: 0 mem: 0.72 MiB (0.0%) 
  4: cpu: 0.0% command: init pid: 1 mem: 0.95 MiB (0.0%) 
  5: cpu: 0.0% command: [crypto] pid: 2 mem: 0.02 MiB (0.0%) 
  Memory top: 5 of 79 
  1: mem: 80.6 MiB (1.0%) command: xorg pid: 1369 cpu: 0.0% 
  2: mem: 45.1 MiB (0.6%) command: networkmgr started by: python3.7 pid: 1650 
  cpu: 0.0% 
  3: mem: 42.3 MiB (0.5%) command: plank: pid: 1618 cpu: 0.0% 
  4: mem: 38.8 MiB (0.5%) command: dsbmixer pid: 1622 cpu: 0.0% 
  5: mem: 38.5 MiB (0.5%) command: dsbmc pid: 1619 cpu: 0.0% 
Info:
  Processes: 79 Uptime: 5m Init: init (BSD) v: N/A tool: service Compilers: 
  gcc: N/A clang: 10.0.1 Shell: csh (login) v: 6.21.00 pinxi: 3.3.01-107
Code: 
System:
  Kernel: OpenBSD 6.8 amd64 bits: 64 compiler: N/A Console: N/A DM: xenodm 
  OS: OpenBSD 6.8 
Machine:
  Type: N/A Mobo: HP-Pavilion model: NY549AA-ABA p6230y serial: <filter> 
  uuid: bc87eb5f-1f99-de11-aa2b-d1cc4eaac5c4 BIOS: American Megatrends v: 5.00 
  rev: 2.6 date: 08/03/2009 
Battery:
  Unknown-error: Unknown dmidecode error. Unable to generate data. 
Memory:
  RAM: total: 7.73 GiB used: 109 MiB (1.4%) 
  RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots:
  Unknown-error: Unknown dmidecode error. Unable to generate data. 
CPU:
  Info: Quad Core model: AMD Phenom II X4 810 bits: 64 type: MCP arch: K10 
  family: 10 (16) model-id: 4 stepping: 2 microcode: N/A cache: L1: 64 KiB 
  L2: 512 KiB L3: 4 MiB 
  Speed: 2594 MHz min/max: N/A 
  Core speeds (MHz): No speed data found for 4 cores. 
  Features: 3dnow 3dnow2 3dnowp abm amcr8 apic cflush cmov cmpleg cx16 cx8 de 
  eapicsp ffxsr fpu fxsr htt ibs itsc lahf long masse mca mce mmx mmxx msr 
  mtrr mwait nxe osvw pae page1gb pat pge popcnt pse pse36 rdtscp sep skinit 
  sse sse2 sse3 sse4a svm tsc vme 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: ATI Radeon HD 4200 driver: N/A bus-ID: 1:5.0 chip-ID: 1002:9710 
  class-ID: 0300 
  Display: server: X.org 1.20.8 driver: loaded: ati,radeon 
  unloaded: modesetting tty: 120x33 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: ATI SBx00 HD Audio driver: N/A bus-ID: 0:20.2 chip-ID: 1002:4383 
  class-ID: 0403 
  Sound Server-1: sndio v: N/A running: yes 
Network:
  Device-1: Realtek 8168 driver: N/A port: N/A bus-ID: 2:0.0 
  chip-ID: 10ec:8168 class-ID: 0200 
  IF-ID-1: re0 state: active speed: 1000baseT 
  duplex: full-duplex,rxpause,txpause mac: <filter> 
  IP v4: <filter> scope: N/A broadcast: <filter> 
  WAN IP: <filter> 
Bluetooth:
  Message: No Bluetooth data was found. 
Logical:
  Message: No BSD support for LVM data. 
RAID:
  Message: No RAID data was found. 
Drives:
  Local Storage: total: 682.26 GiB used: 1.45 GiB (0.2%) 
  SMART Message: Required tool smartctl not installed. Check --recommends 
  ID-1: /dev/sd0 vendor: Seagate model: ST3750528AS size: 682.26 GiB 
  serial: N/A 
  ID-2: /dev/sd1 type: removable model: Compact Flash size: N/A serial: N/A 
  ID-3: /dev/sd2 type: removable model: SM/xD-Picture size: N/A serial: N/A 
  ID-4: /dev/sd3 type: removable model: SD/MMC size: N/A serial: N/A 
  ID-5: /dev/sd4 type: removable model: MS/MS-Pro size: N/A serial: N/A 
  Optical-1: /dev/cd0 vendor: hp model: DVD-RAM GH40L rev: RB0A dev-links: N/A 
  Features: speed: N/A multisession: N/A audio: N/A dvd: yes rw: cd-r,dvd-ram 
  state: N/A 
Partition:
  ID-1: / size: 985.8 MiB used: 109.4 MiB (11.1%) fs: ffs dev: /dev/sd0a 
  label: N/A uuid: N/A 
  ID-2: /home size: 295.27 GiB used: 4 KiB (0.0%) fs: ffs dev: /dev/sd0k 
  label: N/A uuid: N/A 
  ID-3: /tmp size: 3.87 GiB used: 12 KiB (0.0%) fs: ffs dev: /dev/sd0d 
  label: N/A uuid: N/A 
  ID-4: /usr size: 5.81 GiB used: 1.09 GiB (18.7%) fs: ffs dev: /dev/sd0f 
  label: N/A uuid: N/A 
  ID-5: /usr/X11R6 size: 985.8 MiB used: 234 MiB (23.7%) fs: ffs 
  dev: /dev/sd0g label: N/A uuid: N/A 
  ID-6: /usr/local size: 19.37 GiB used: 22.6 MiB (0.1%) fs: ffs 
  dev: /dev/sd0h label: N/A uuid: N/A 
  ID-7: /usr/obj size: 5.81 GiB used: 2 KiB (0.0%) fs: ffs dev: /dev/sd0j 
  label: N/A uuid: N/A 
  ID-8: /usr/src size: 1.93 GiB used: 2 KiB (0.0%) fs: ffs dev: /dev/sd0i 
  label: N/A uuid: N/A 
  ID-9: /var size: 18.85 GiB used: 7.2 MiB (0.0%) fs: ffs dev: /dev/sd0e 
  label: N/A uuid: N/A 
Swap:
  ID-1: swap-1 type: partition size: 7.98 GiB used: 0 KiB (0.0%) 
  dev: /dev/sd0b label: N/A uuid: N/A 
Unmounted:
  Message: No Unmounted partition data found for this BSD system. 
USB:
  Hub-1: 0-01:01 info: ATI EHCI root hub ports: N/A rev: N/A 
  chip-ID: 1002:0000 
  Device-1: 0-02:02 info: Generic USB2.0-CRW type: N/A driver: umass rev: N/A 
  power: 500mA chip-ID: 0bda:0151 
  Hub-2: 1-01:01 info: ATI EHCI root hub ports: N/A rev: N/A 
  chip-ID: 1002:0000 
  Hub-3: 2-01:01 info: ATI OHCI root hub ports: N/A rev: N/A 
  chip-ID: 1002:0000 
  Device-1: 2-02:02 info: Microsoft Comfort Curve Keyboard 2000 type: HID 
  driver: uhidev rev: 1.0 speed: 1.5 Mb/s power: 100mA chip-ID: 045e:00dd 
  Hub-4: 3-01:01 info: ATI OHCI root hub ports: N/A rev: N/A 
  chip-ID: 1002:0000 
  Device-1: 3-02:02 info: Primax USB Optical Mouse type: HID driver: uhidev 
  rev: 1.0 speed: 1.5 Mb/s power: 98mA chip-ID: 0461:4d64 
  Hub-5: 4-01:01 info: ATI OHCI root hub ports: N/A rev: N/A 
  chip-ID: 1002:0000 
  Hub-6: 5-01:01 info: ATI OHCI root hub ports: N/A rev: N/A 
  chip-ID: 1002:0000 
  Hub-7: 6-01:01 info: ATI OHCI root hub ports: N/A rev: N/A 
  chip-ID: 1002:0000 
Sensors:
  Platform: No OS support. Is a comparable Openbsd sensors tool available? 
Repos:
  Packages: pkg_info: 13 lib: 4 
  OpenBSD pkg mirror: /etc/installurl 
  1: https://cdn.openbsd.org/pub/OpenBSD
Processes:
  CPU top: 5 of 43 
  1: cpu: 0.0% command: init pid: 1 mem: 0.40 MiB (0.0%) 
  2: cpu: 0.0% command: slaacd pid: 99853 mem: 0.57 MiB (0.0%) 
  3: cpu: 0.0% command: slaacd: pid: 40398 mem: 0.67 MiB (0.0%) 
  4: cpu: 0.0% command: slaacd: pid: 5944 mem: 0.71 MiB (0.0%) 
  5: cpu: 0.0% command: dhclient: pid: 16654 mem: 0.52 MiB (0.0%) 
  Memory top: 5 of 43 
  1: mem: 49.8 MiB (0.6%) command: x pid: 2265 cpu: 0.0% 
  2: mem: 31.1 MiB (0.4%) command: pinxi started by: perl pid: 74665 cpu: 0.0% 
  3: mem: 7.30 MiB (0.1%) command: xterm pid: 21528 cpu: 0.0% 
  4: mem: 6.64 MiB (0.1%) command: xenodm: pid: 33300 cpu: 0.0% 
  5: mem: 4.02 MiB (0.1%) command: smtpd: pid: 6805 cpu: 0.0% 
Info:
  Processes: 43 Uptime: 2m Init: init (BSD) v: N/A tool: /etc/rc.d Compilers: 
  gcc: 4.2.1 clang: 10.0.1 Shell: ksh v: 5.2.14_99/07/13.2 pinxi: 3.3.01-107
 
h2-1 said:
Note that for freebsd/dragonfly, cpu L1/2/3 cache data will only show if root since it comes from dmidecode, but that's fine
Click to expand...
Do you want any tests run as a regular user?
 
Data is looking amazing, there's never been this much shown, just for your own benefit, take any linux install, run pinxi -v8 on it, and you'll see the progress, you can also take inxi on any of these bsds and run it side by side, and you'll see the differences quite clearly. But the BSDs have never gotten this many fields completed before, not even close.

More fine tunings, I'd noticed that the data had bytes / sector for disks, but didn't add that, now that's working for openbsd (have to manually calculate that from sector count/disk size). While doing this, I realized that I'd been sending the disk size tool the MB measurement instead of M, which resulted in the wrong disk size in GiB (MB triggers units o f 1000, MiB or M 1024). So this also fixes wrong disk sizes for the bsds, all of them, which is good.

Inxi has future proofed should the bsd guys ever stop doing that, so they can use MB, M, or MiB, and inxi will treat those as the same thing.

Note that regular user for freebsd and openbsd should now see disk block size for physical, only with root smartctl will you se e logical too.

I'd grown faintly aware that this data could be grabbed, note that the game here is to fill in as many missing items as possible while maintaining a reasonable code base.

For OpenBSD, they don't list block size per se, but you can get that from disk size total in KiB and sector total counts, that's how I realized that the math was wrong, I was ending up with block size of 500, which isn't possible.

These changes are live in pinxi, it's getting pretty granular here, but that's how it goes when you focus on something this much, you see more and more, and realize that there are actual sources for this data in bsds if you're willing to get convoluted enough.

Note that dragonfly doesn't have this data unless gpart or smartctl are installed, but the others do.
 
I remain puzzled by one thing, when I login to console, all my bsd test systems are showing the 'running-in: tty [x]' item, but none of yours are, there's something I'm still missing there, I don't know if it's based on the systems being in a vm, which it should definitely not be, or something else, that is unknown. This is the remaining thing I cannot yet explain, it's an odd one, the tty data is kind of fundamental in a sense, and I don't understand why it isn't showing in yours, there must be some difference there, maybe it's related to having root only login? That's the only difference I can see, I always add my user to them when setting it up. When I su - to root, it shows the tty fine still, nothing I do can make it stop showing that.
 
Latest patch is changing the way tty is handled, there was a case where it might have trimmed off the entire value, so I've changed it to only trim off /dev/tty and leave the rest, that will also be more precise since there are various types of ttys out there.

This might correct the issue, not sure, it will lead to improved accuracy about which tty is actually being used, inxi used to remove all the stuff, but that led to lack of clarity I think, and may be the cause of this failure.
 
h2-1 said:
take any linux install, run pinxi -v8 on it, and you'll see the progress
Click to expand...
It looks great! :)

I was very happy with the Vulnerabilities section... and my old computer was unaffected by any of those that you examine. Sweet! :D
 
Last edited:
h2-1 said:
I remain puzzled by one thing, when I login to console, all my bsd test systems are showing the 'running-in: tty [x]' item, but none of yours are, there's something I'm still missing there
Click to expand...
In most cases lately, I boot into BSD and never load X at all. Nomad is an exception, and from it I have been using CTRL-ALT-F1 to get a tty for testing. I have gotten better at mounting a USB to copy the data outputs to post here instead of emailing them to myself. ;)

All of my test setups are BIOS/MBR except the HP laptop, which is UEFI... but not sure if hard drive is GPT or MBR. I'll look into that.
 
Last edited:
h2-1 said:
Latest patch is changing the way tty is handled, there was a case where it might have trimmed off the entire value, so I've changed it to only trim off /dev/tty and leave the rest, that will also be more precise since there are various types of ttys out there.
Click to expand...
Shall I update pinxi and run through them all again (-zyv8) As root?
 
Might as well, yes, I keep saying no, I only need to see x or y but then each time I notice something else in one of the lines.

Success means the Info line is showing the running-in: tty item.

This fix means I removed a kind of silly output limit where I'd only show the shell number, but since valid tty numbers can be hexidecimal, like say, ttyaf, that was always a bad idea, and it actually matters which tty you are on, say, a serial connection, a usb serial connection, etc, these all have different letters attached.
 
No problem for me. This gets easier each time. Back soon.
 
OK, here they come... pinxi-109, all as root...
Code: 
System:
  Kernel: FreeBSD 12.2-RELEASE-p4 amd64 bits: 64 compiler: clang v: 10.0.1 
  Console: N/A OS: FreeBSD 12.2-RELEASE-p4 
Machine:
  Type: Notebook Mobo: ASUSTeK model: X401U v: 1.0 serial: <filter> 
  UEFI: American Megatrends v: X401U.204 rev: 4.6 date: 05/08/2012 
  rom size: 1 MB 
Memory:
  RAM: total: 3.57 GiB used: 341.1 MiB (9.3%) 
  Array-1: capacity: 4 GiB slots: 2 EC: None max-module-size: 4 GiB note: est. 
  Device-1: DIMM 0 size: 4 GiB speed: spec: 1333 MT/s actual: 533 MT/s 
  type: DDR3 detail: synchronous unbuffered (unregistered) bus-width: 64 bits 
  total: 64 bits manufacturer: Elpida part-no: Not Specified serial: N/A 
PCI Slots:
  Slot: 0 type: x16 PCI Express J6B2 status: In Use length: Long 
  Slot: 1 type: x1 PCI Express J6B1 status: In Use length: Short 
  Slot: 2 type: x1 PCI Express J6D1 status: In Use length: Short 
CPU:
  Info: Dual Core model: AMD E1-1200 APU with Radeon HD Graphics socket: P0 
  bits: 64 type: MCP arch: Bobcat family: 14 (20) model-id: 2 stepping: N/A 
  microcode: 500F20 cache: L1: 128 KiB L2: 1024 KiB 
  Speed: 1397 MHz min/max: 777/1400 MHz base/boost: 1400/1400 volts: 1.4 V 
  ext-clock: 100 MHz Core speeds (MHz): No speed data found for 2 cores. 
  Features: abm apic clflush cmov cmp cr8 cx16 cx8 de extapic ffxsr fpu fxsr 
  htt ibs lahf lm mas mca mce mmx mmx+ mon msr mtrr nx pae page1gb pat pge 
  popcnt prefetch pse pse36 rdtscp sep skinit sse sse2 sse3 sse4a ssse3 svm 
  syscall tsc vme wdt 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: AMD Wrestler [Radeon HD 7310] driver: vgapci bus-ID: 0:0:1.0 
  chip-ID: 1002:9809 class-ID: 0300 
  Device-2: Azurewave USB 2.0 UVC VGA WebCam type: USB driver: ugen 
  bus-ID: 4-4.2:2 chip-ID: N/A 
  Display: server: X.org 1.20.9 driver: loaded: vesa unloaded: modesetting 
  alternate: ati tty: 80x30 
  Message: Advanced graphics data unavailable in console for root. 
Audio:
  Device-1: AMD Wrestler HDMI Audio driver: hdac bus-ID: 0:0:1.1 
  chip-ID: 1002:1314 class-ID: 0403 
  Device-2: AMD FCH Azalia driver: hdac bus-ID: 0:0:20.2 chip-ID: 1022:780d 
  class-ID: 0403 
  Sound Server-1: OSS v: 2009061500 running: yes 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: re 
  port: N/A bus-ID: 0:6:0.0 chip-ID: 10ec:8168 class-ID: 0200 
  IF: re0 state: active speed: 1000baseT duplex: full-duplex mac: <filter> 
  IP v4: <filter> scope: N/A broadcast: <filter> 
  Device-2: Ralink RT5390 Wireless 802.11n 1T/1R PCIe driver: ral 
  bus-ID: 0:7:0.0 chip-ID: 1814:5390 class-ID: 0280 
  WAN IP: <filter> 
Bluetooth:
  Message: No Bluetooth data was found. 
Logical:
  Message: No BSD support for LVM data. 
RAID:
  Message: No RAID data was found. 
Drives:
  Local Storage: total: 298.09 GiB used: 6.33 GiB (2.1%) 
  ID-1: /dev/ada0 vendor: Seagate model: ST320LT012-9WS14C 0001SDM1 
  family: Laptop HDD size: 298.09 GiB block-size: physical: 4096 B 
  logical: 512 B sata: 2.6 speed: 300MB/s rotation: 5400 rpm serial: <filter> 
  rev: 0001SDM1 temp: 27 C 
  SMART: yes state: enabled health: PASSED on: 159d 2h cycles: 2385 
  read: 1.62 TiB written: 616.05 GiB Pre-Fail: attribute: Spin_Retry_Count 
  value: 100 worst: 100 threshold: 97 
  Optical Report: No Optical or Floppy data found for this BSD system. 
Partition:
  ID-1: / size: 284.77 GiB used: 6.33 GiB (2.2%) fs: ufs block-size: 512 B 
  dev: /dev/ada0s1a label: N/A uuid: N/A 
Swap:
  ID-1: swap-1 type: partition size: 4 GiB used: 0 KiB (0.0%) 
  dev: /dev/ada0s1b label: N/A uuid: N/A 
Unmounted:
  Message: No Unmounted partition data found for this BSD system. 
USB:
  Hub-1: 0-0.1:1 info: 0x1022 XHCI root HUB ports: N/A rev: 3.0 speed: 5 Gb/s 
  chip-ID: N/A 
  Hub-2: 1-1.1:1 info: AMD OHCI root HUB ports: N/A rev: 1.1 speed: 12 Mb/s 
  chip-ID: N/A 
  Hub-3: 2-2.1:1 info: AMD EHCI root HUB ports: N/A rev: 2.0 speed: 480 Mb/s 
  chip-ID: N/A 
  Hub-4: 3-3.1:1 info: AMD OHCI root HUB ports: N/A rev: 1.1 speed: 12 Mb/s 
  chip-ID: N/A 
  Hub-5: 4-4.1:1 info: AMD EHCI root HUB ports: N/A rev: 2.0 speed: 480 Mb/s 
  chip-ID: N/A 
  Device-1: 4-4.2:2 info: Azurewave USB 2.0 UVC VGA WebCam type: Video 
  driver: ugen rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: N/A 
Sensors:
  Platform: No OS support. Is a comparable Freebsd sensors tool available? 
Repos:
  Packages: pkg: 3 
  BSD ports server: /etc/portsnap.conf 
  1: portsnap.FreeBSD.org
  FreeBSD update server: /etc/freebsd-update.conf 
  1: update.FreeBSD.org
  BSD enabled pkg servers in: /etc/pkg/FreeBSD.conf 
  1: pkg+http://pkg.FreeBSD.org/$ABI/quarterly
Processes:
  CPU top: 5 of 55 
  1: cpu: 191.3% command: [idle] pid: 11 mem: 0.03 MiB (0.0%) 
  2: cpu: 8.7% command: pinxi started by: perl pid: 929 mem: 27.9 MiB (0.8%) 
  3: cpu: 0.0% command: [kernel] pid: 0 mem: 0.31 MiB (0.0%) 
  4: cpu: 0.0% command: init pid: 1 mem: 0.98 MiB (0.0%) 
  5: cpu: 0.0% command: [crypto] pid: 2 mem: 0.02 MiB (0.0%) 
  Memory top: 5 of 55 
  1: mem: 27.9 MiB (0.8%) command: pinxi started by: perl pid: 929 cpu: 8.7% 
  2: mem: 22.1 MiB (0.6%) command: polkitd pid: 779 cpu: 0.0% 
  3: mem: 9.32 MiB (0.3%) command: hald pid: 890 cpu: 0.0% 
  4: mem: 8.11 MiB (0.2%) command: sshd pid: 820 cpu: 0.0% 
  5: mem: 7.30 MiB (0.2%) command: console-kit-daemon pid: 777 cpu: 0.0% 
Info:
  Processes: 55 Uptime: 1m Init: init (BSD) v: N/A tool: service Compilers: 
  gcc: N/A clang: 10.0.1 Shell: csh (login) v: 6.21.00 pinxi: 3.3.01-109
Code: 
System:
  Kernel: FreeBSD 13.0-RC2 amd64 bits: 64 compiler: clang v: 11.0.1 
  Console: N/A OS: FreeBSD 13.0-RC2 
Machine:
  Type: Notebook System: Hewlett-Packard product: HP Pavilion 11 x360 PC 
  v: 0975100002405F00010420180 serial: <filter> Chassis: serial: N/A 
  Mobo: Hewlett-Packard model: 2209 v: 57.36 serial: <filter> BIOS: Insyde 
  v: F.14 rev: 15.20 date: 07/28/2014 rom size: 4608 kB 
Battery:
  ID-1: BAT0 charge: N/A condition: N/A/29.0 Wh volts: N/A min: 7.6 
  model: 33-42 PL02029 type: LION serial: <filter> status: N/A 
  location: Primary 
Memory:
  RAM: total: 3.85 GiB used: 422.1 MiB (10.7%) 
  Array-1: capacity: 8 GiB slots: 1 EC: None max-module-size: 8 GiB note: est. 
  Device-1: Bottom size: 4 GiB speed: 1333 MT/s type: DDR3 detail: synchronous 
  bus-width: 64 bits total: 64 bits manufacturer: Samsung 
  part-no: M471B5173QH0-YK0 serial: <filter> 
PCI Slots:
  Slot: 0 type: x4 PCI Express x4 J5C1 status: Available length: Other 
  Slot: 0 type: x1 PCI Express x1 J4B3 status: Available length: Other 
  Slot: 0 type: x1 PCI Express x1 J6C1 status: Available length: Other 
  Slot: 0 type: x1 PCI Express x1 J6D1 status: Available length: Other 
CPU:
  Info: Quad Core model: Intel Pentium N3540 bits: 64 type: MCP 
  arch: Silvermont family: 6 model-id: 37 (55) stepping: 8 microcode: 30678 
  cache: L1: 56 KiB L2: 1024 KiB 
  Speed: 2166 MHz min/max: 498/2159 MHz base/boost: 2178/2656 volts: 0.9 V 
  ext-clock: 83 MHz Core speeds (MHz): No speed data found for 4 cores. 
  Features: acpi apic clflush cmov cx16 cx8 de ds_cpl dtes64 dts erms est fpu 
  fxsr htt lahf lm mca mce mmx mon movbe msr mtrr nfpusg nx pae pat pbe 
  pclmulqdq pdcm pge popcnt prefetch pse pse36 rdrand rdtscp sep smep ss sse 
  sse2 sse3 sse4.1 sse4.2 ssse3 syscall tm tm2 tsc tscadj tscdlt vme vmx xtpr 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: Intel Atom Processor Z36xxx/Z37xxx Series Graphics & Display 
  driver: vgapci bus-ID: 0:0:2.0 chip-ID: 8086:0f31 class-ID: 0300 
  Display: server: No display server data found. Headless machine? tty: 97x27 
  Message: Advanced graphics data unavailable in console for root. 
Audio:
  Device-1: Intel Atom Processor Z36xxx/Z37xxx Series High Definition Audio 
  driver: hdac bus-ID: 0:0:27.0 chip-ID: 8086:0f04 class-ID: 0403 
  Sound Server-1: OSS v: 2009061500 running: yes 
Network:
  Device-1: Ralink RT3290 Wireless 802.11n 1T/1R PCIe driver: none 
  bus-ID: 0:2:0.0 chip-ID: 1814:3290 class-ID: 0280 
  Device-2: Realtek RTL810xE PCI Express Fast Ethernet driver: re port: N/A 
  bus-ID: 0:4:0.0 chip-ID: 10ec:8136 class-ID: 0200 
  IF: re0 state: active speed: 100baseTX duplex: full-duplex mac: <filter> 
  IP v4: <filter> scope: N/A broadcast: <filter> 
  WAN IP: <filter> 
Bluetooth:
  Device-1: Ralink RT3290 Bluetooth driver: none bus-ID: 0:2:0.1 
  chip-ID: 1814:3298 class-ID: 0d11 
  Report: No OS support. Is a comparable bluetooth tool available? 
Logical:
  Message: No BSD support for LVM data. 
RAID:
  Device-1: zroot type: zfs status: ONLINE level: linear size: 460 GiB 
  free: 459 GiB allocated: 1.02 GiB 
  Components: Online: 
  1: ada0p4 size: 463.51 GiB 
Drives:
  Local Storage: total: 465.76 GiB used: 1.02 GiB (0.2%) 
  SMART Message: Required tool smartctl not installed. Check --recommends 
  ID-1: /dev/ada0 vendor: Toshiba model: MQ01ABF050 AM0P2C size: 465.76 GiB 
  block-size: physical: 512 B logical: N/A speed: 300MB/s serial: <filter> 
  Optical Report: No Optical or Floppy data found for this BSD system. 
Partition:
  ID-1: / size: 445.62 GiB used: 1.01 GiB (0.2%) fs: zfs 
  logical: zroot/ROOT/default label: N/A uuid: N/A 
  ID-2: /boot/efi size: 259.9 MiB used: 1.8 MiB (0.7%) fs: msdosfs 
  block-size: 512 B dev: /dev/ada0p1 label: efiboot0 
  uuid: b755831a-8408-11eb-a3ed-3464a9c439eb 
  ID-3: /tmp size: 444.61 GiB used: 96 KiB (0.0%) fs: zfs logical: zroot/tmp 
  label: N/A uuid: N/A 
  ID-4: /usr/home size: 444.61 GiB used: 128 KiB (0.0%) fs: zfs 
  logical: zroot/usr/home label: N/A uuid: N/A 
  ID-5: /usr/ports size: 444.61 GiB used: 96 KiB (0.0%) fs: zfs 
  logical: zroot/usr/ports label: N/A uuid: N/A 
  ID-6: /usr/src size: 444.61 GiB used: 96 KiB (0.0%) fs: zfs 
  logical: zroot/usr/src label: N/A uuid: N/A 
  ID-7: /var/audit size: 444.61 GiB used: 96 KiB (0.0%) fs: zfs 
  logical: zroot/var/audit label: N/A uuid: N/A 
  ID-8: /var/crash size: 444.61 GiB used: 96 KiB (0.0%) fs: zfs 
  logical: zroot/var/crash label: N/A uuid: N/A 
  ID-9: /var/log size: 444.61 GiB used: 168 KiB (0.0%) fs: zfs 
  logical: zroot/var/log label: N/A uuid: N/A 
  ID-10: /var/mail size: 444.61 GiB used: 96 KiB (0.0%) fs: zfs 
  logical: zroot/var/mail label: N/A uuid: N/A 
  ID-11: /var/tmp size: 444.61 GiB used: 96 KiB (0.0%) fs: zfs 
  logical: zroot/var/tmp label: N/A uuid: N/A 
  ID-12: /zroot size: 444.61 GiB used: 96 KiB (0.0%) fs: zfs logical: zroot 
  label: N/A uuid: N/A 
Swap:
  ID-1: swap-1 type: partition size: 2 GiB used: 0 KiB (0.0%) dev: /dev/ada0p3 
  label: N/A uuid: N/A 
Unmounted:
  Message: No Unmounted partition data found for this BSD system. 
USB:
  Hub-1: 0-0.1:1 info: 0x8086 XHCI root HUB ports: N/A rev: 3.0 speed: 5 Gb/s 
  chip-ID: N/A 
  Device-1: 0-0.2:2 info: DECTK019I7C6HM HP Truevision HD type: N/A 
  driver: ugen rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: N/A 
  Hub-2: 0-0.3:3 info: USB 2.0 Hub ports: N/A rev: 2.0 speed: 480 Mb/s 
  power: 100mA chip-ID: 1a40: 
Sensors:
  Platform: No OS support. Is a comparable Freebsd sensors tool available? 
Repos:
  Packages: pkg: 3 
  BSD ports server: /etc/portsnap.conf 
  1: portsnap.FreeBSD.org
  FreeBSD update server: /etc/freebsd-update.conf 
  1: update.FreeBSD.org
  BSD enabled pkg servers in: /etc/pkg/FreeBSD.conf 
  1: pkg+http://pkg.FreeBSD.org/$ABI/quarterly
Processes:
  CPU top: 5 of 49 
  1: cpu: 392.5% command: [idle] pid: 11 mem: 0.06 MiB (0.0%) 
  2: cpu: 0.0% command: [kernel] pid: 0 mem: 5.77 MiB (0.1%) 
  3: cpu: 0.0% command: init pid: 1 mem: 1.09 MiB (0.0%) 
  4: cpu: 0.0% command: [ktls] pid: 2 mem: 0.06 MiB (0.0%) 
  5: cpu: 0.0% command: [crypto] pid: 3 mem: 0.02 MiB (0.0%) 
  Memory top: 5 of 49 
  1: mem: 28.0 MiB (0.7%) command: pinxi started by: perl pid: 1125 cpu: 0.0% 
  2: mem: 8.20 MiB (0.2%) command: sshd pid: 1077 cpu: 0.0% 
  3: mem: 7.00 MiB (0.2%) command: sendmail: pid: 1056 cpu: 0.0% 
  4: mem: 6.06 MiB (0.2%) command: sendmail: pid: 1059 cpu: 0.0% 
  5: mem: 5.77 MiB (0.1%) command: [kernel] pid: 0 cpu: 0.0% 
Info:
  Processes: 49 Uptime: 2m Init: init (BSD) v: N/A tool: service Compilers: 
  gcc: N/A clang: 11.0.1 Shell: csh (login) v: 6.21.00 pinxi: 3.3.01-109
 
Code: 
System:
  Kernel: FreeBSD 12.2-RELEASE-p4 amd64 bits: 64 compiler: clang v: 10.0.1 
  Console: N/A DM: SLiM 1.3.6 OS: NomadBSD base: FreeBSD 12.2-RELEASE-p4 
Machine:
  Type: Desktop System: HP-Pavilion product: NY549AA-ABA p6230y v: N/A 
  serial: <filter> Chassis: Hewlett-Packard serial: N/A 
  Mobo: FOXCONN model: ALOE v: X3 serial: N/A BIOS: American Megatrends 
  v: 5.00 rev: 5.0 date: 08/03/2009 rom size: 1 MB 
Memory:
  RAM: total: 7.71 GiB used: 986.6 MiB (12.5%) 
  Array-1: capacity: 16 GiB slots: 4 EC: None max-module-size: 4 GiB 
  note: est. 
  Device-1: DIMM0 size: 2 GiB speed: 1066 MT/s type: Other detail: synchronous 
  bus-width: 64 bits total: 64 bits manufacturer: Micron 
  part-no: 16JTF25664AZ-1G4F1 serial: <filter> 
  Device-2: DIMM1 size: 2 GiB speed: 1066 MT/s type: Other detail: synchronous 
  bus-width: 64 bits total: 64 bits manufacturer: Micron 
  part-no: 16JTF25664AZ-1G4F1 serial: <filter> 
  Device-3: DIMM2 size: 2 GiB speed: 1066 MT/s type: Other detail: synchronous 
  bus-width: 64 bits total: 64 bits manufacturer: Micron 
  part-no: 16JTF25664AZ-1G4F1 serial: <filter> 
  Device-4: DIMM3 size: 2 GiB speed: 1066 MT/s type: Other detail: synchronous 
  bus-width: 64 bits total: 64 bits manufacturer: Micron 
  part-no: 16JTF25664AZ-1G4F1 serial: <filter> 
PCI Slots:
  Slot: 2 type: x16 PCI Express PCI-E x16 status: Available length: Short 
  Slot: 5 type: x1 PCI Express MINI PCI-E x1 status: Available length: Short 
  Slot: 6 type: x1 PCI Express PCI-E x1 status: Available length: Short 
  Slot: 7 type: x1 PCI Express PCI-E x1 status: Available length: Short 
  Slot: 9 type: x1 PCI Express PCI-E x1 status: Available length: Short 
CPU:
  Info: Quad Core model: AMD Phenom II X4 810 bits: 64 type: MCP arch: K10 
  family: 10 (16) model-id: 4 stepping: 2 microcode: 100F42 cache: L1: 512 KiB 
  L2: 2 MiB L3: 4 MiB 
  Speed: 2593 MHz min/max: 800/2600 MHz base/boost: 2600/2600 volts: 1.5 V 
  ext-clock: 200 MHz Core speeds (MHz): No speed data found for 4 cores. 
  Features: 3dnow! 3dnow!+ abm apic clflush cmov cmp cr8 cx16 cx8 de extapic 
  ffxsr fpu fxsr htt ibs lahf lm mas mca mce mmx mmx+ mon msr mtrr nx osvw pae 
  page1gb pat pge popcnt prefetch pse pse36 rdtscp sep skinit sse sse2 sse3 
  sse4a svm syscall tsc vme wdt 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: AMD RS880 [Radeon HD 4200] driver: vgapci bus-ID: 0:1:5.0 
  chip-ID: 1002:9710 class-ID: 0300 
  Display: server: X.org 1.20.9 compositor: picom v: 8.2 driver: 
  loaded: radeon tty: 240x67 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: AMD SBx00 Azalia driver: hdac bus-ID: 0:0:20.2 chip-ID: 1002:4383 
  class-ID: 0403 
  Sound Server-1: OSS v: 2009061500 running: yes 
  Sound Server-2: PulseAudio v: 13.0 running: yes 
Network:
  Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: re 
  port: N/A bus-ID: 0:2:0.0 chip-ID: 10ec:8168 class-ID: 0200 
  IF: re0 state: active speed: 1000baseT duplex: full-duplex mac: <filter> 
  IP v6: <filter> scope: link 
  IP v4: <filter> scope: N/A broadcast: <filter> 
  WAN IP: <filter> 
Bluetooth:
  Message: No Bluetooth data was found. 
Logical:
  Message: No BSD support for LVM data. 
RAID:
  Message: No RAID data was found. 
Drives:
  Local Storage: total: 473.56 GiB used: 17.27 GiB (3.6%) 
  ID-1: /dev/ada0 vendor: Samsung model: SSD 850 EVO 500GB EMT02B6Q 
  family: based SSDs size: 465.76 GiB block-size: physical: 512 B 
  logical: 512 B sata: 3.1 speed: 300MB/s rotation: SSD serial: <filter> 
  rev: EMT02B6Q temp: 28 C 
  SMART: yes state: enabled health: PASSED on: 319d 2h cycles: 1274 
  written: 3.01 TiB 
  ID-2: /dev/da0 vendor: Centon model: DS Pro 8.07 size: 7.8 GiB block-size: 
  physical: 512 B logical: N/A speed: 40MB/s serial: <filter> 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  ID-3: /dev/da1 vendor: Generic model: Compact Flash 1.00 size: N/A 
  speed: 40MB/s serial: <filter> 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  ID-4: /dev/da2 vendor: Generic model: SM/xD-Picture 1.00 size: N/A 
  speed: 40MB/s serial: <filter> 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  ID-5: /dev/da3 vendor: Generic model: SD/MMC 1.00 size: N/A speed: 40MB/s 
  serial: <filter> 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  ID-6: /dev/da4 vendor: Generic model: MS/MS-Pro 1.00 size: N/A speed: 40MB/s 
  serial: <filter> 
  SMART Message: Unknown USB bridge. Flash drive/Unsupported enclosure? 
  Optical-1: /dev/cd0 vendor: hp model: DVD-RAM GH40L rev: RB0A 
  serial: <filter> dev-links: N/A 
  Features: speed: 150MB/s multisession: N/A audio: N/A dvd: yes 
  rw: cd-r,dvd-ram state: Medium not present, tray closed 
Partition:
  ID-1: / size: 3.58 GiB used: 3.22 GiB (89.9%) fs: ufs dev: /dev/nomadroot 
  label: N/A uuid: N/A 
  ID-2: /compat size: 4.05 GiB used: 269.4 MiB (6.5%) fs: nullfs 
  logical: /data/compat label: N/A uuid: N/A 
  ID-3: /data size: 4.05 GiB used: 269.4 MiB (6.5%) fs: ufs 
  dev: /dev/nomaddata label: N/A uuid: N/A 
  ID-4: /unionfs/usr/local size: 6.45 GiB used: 6.02 GiB (93.3%) fs: ufs 
  dev: /dev/md0.uzip label: N/A uuid: N/A 
  ID-5: /usr/local size: 10.51 GiB used: 6.72 GiB (63.9%) fs: fusefs 
  dev: /dev/fuse label: N/A uuid: N/A 
  ID-6: /usr/ports size: 4.05 GiB used: 269.4 MiB (6.5%) fs: nullfs 
  logical: /data/usr/ports label: N/A uuid: N/A 
  ID-7: /var/db size: 4.05 GiB used: 269.4 MiB (6.5%) fs: nullfs 
  logical: /data/var/db label: N/A uuid: N/A 
  ID-8: /var/tmp size: 4.05 GiB used: 269.4 MiB (6.5%) fs: nullfs 
  logical: /data/var/tmp label: N/A uuid: N/A 
Swap:
  Alert: No Swap data was found. 
Unmounted:
  Message: No Unmounted partition data found for this BSD system. 
USB:
  Hub-1: 0-0.1:1 info: ATI OHCI root HUB ports: N/A rev: 1.1 speed: 12 Mb/s 
  chip-ID: N/A 
  Hub-2: 1-1.1:1 info: ATI OHCI root HUB ports: N/A rev: 1.1 speed: 12 Mb/s 
  chip-ID: N/A 
  Hub-3: 2-2.1:1 info: ATI EHCI root HUB ports: N/A rev: 2.0 speed: 480 Mb/s 
  chip-ID: N/A 
  Device-1: 2-2.2:2 info: CENTON DS Pro type: N/A driver: ugen rev: 2.0 
  speed: 480 Mb/s power: 100mA chip-ID: N/A 
  Device-2: 2-2.3:3 info: Generic USB2.0-CRW type: N/A driver: ugen rev: 2.0 
  speed: 480 Mb/s power: 500mA chip-ID: N/A 
  Hub-4: 3-3.1:1 info: ATI OHCI root HUB ports: N/A rev: 1.1 speed: 12 Mb/s 
  chip-ID: N/A 
  Device-1: 3-3.2:2 info: CHICONY HP USB Multimedia Keyboard type: HID 
  driver: ugen rev: 1.0 speed: 1.5 Mb/s power: 100mA chip-ID: N/A 
  Hub-5: 4-4.1:1 info: ATI OHCI root HUB ports: N/A rev: 1.1 speed: 12 Mb/s 
  chip-ID: N/A 
  Hub-6: 5-5.1:1 info: ATI EHCI root HUB ports: N/A rev: 2.0 speed: 480 Mb/s 
  chip-ID: N/A 
  Hub-7: 6-6.1:1 info: ATI OHCI root HUB ports: N/A rev: 1.1 speed: 12 Mb/s 
  chip-ID: N/A 
  Device-1: 6-6.2:2 info: Microsoft 3-Button Mouse with IntelliEye type: HID 
  driver: ugen rev: 1.0 speed: 1.5 Mb/s power: 100mA chip-ID: N/A 
Sensors:
  Platform: No OS support. Is a comparable Freebsd sensors tool available? 
Repos:
  Packages: pkg: 3 
  BSD ports server: /etc/portsnap.conf 
  1: portsnap.FreeBSD.org
  FreeBSD update server: /etc/freebsd-update.conf 
  1: update.FreeBSD.org
  BSD enabled pkg servers in: /etc/pkg/FreeBSD.conf 
  1: pkg+http://pkg.FreeBSD.org/$ABI/quarterly
Processes:
  CPU top: 5 of 79 
  1: cpu: 389.7% command: [idle] pid: 11 mem: 0.06 MiB (0.0%) 
  2: cpu: 0.2% command: unionfs pid: 263 mem: 14.9 MiB (0.2%) 
  3: cpu: 0.0% command: [kernel] pid: 0 mem: 0.72 MiB (0.0%) 
  4: cpu: 0.0% command: init pid: 1 mem: 0.95 MiB (0.0%) 
  5: cpu: 0.0% command: [crypto] pid: 2 mem: 0.02 MiB (0.0%) 
  Memory top: 5 of 79 
  1: mem: 80.5 MiB (1.0%) command: xorg pid: 1369 cpu: 0.0% 
  2: mem: 45.1 MiB (0.6%) command: networkmgr started by: python3.7 pid: 1650 
  cpu: 0.0% 
  3: mem: 42.4 MiB (0.5%) command: plank: pid: 1618 cpu: 0.0% 
  4: mem: 38.6 MiB (0.5%) command: dsbmixer pid: 1622 cpu: 0.0% 
  5: mem: 38.5 MiB (0.5%) command: dsbmc pid: 1619 cpu: 0.0% 
Info:
  Processes: 79 Uptime: 4m Init: init (BSD) v: N/A tool: service Compilers: 
  gcc: N/A clang: 10.0.1 Shell: csh (login) v: 6.21.00 pinxi: 3.3.01-109
Code: 
System:
  Kernel: OpenBSD 6.8 amd64 bits: 64 compiler: N/A Console: N/A DM: xenodm 
  OS: OpenBSD 6.8 
Machine:
  Type: N/A Mobo: HP-Pavilion model: NY549AA-ABA p6230y serial: <filter> 
  uuid: bc87eb5f-1f99-de11-aa2b-d1cc4eaac5c4 BIOS: American Megatrends v: 5.00 
  rev: 2.6 date: 08/03/2009 
Battery:
  Unknown-error: Unknown dmidecode error. Unable to generate data. 
Memory:
  RAM: total: 7.73 GiB used: 104 MiB (1.3%) 
  RAM Report: unknown-error: Unknown dmidecode error. Unable to generate data. 
PCI Slots:
  Unknown-error: Unknown dmidecode error. Unable to generate data. 
CPU:
  Info: Quad Core model: AMD Phenom II X4 810 bits: 64 type: MCP arch: K10 
  family: 10 (16) model-id: 4 stepping: 2 microcode: N/A cache: L1: 64 KiB 
  L2: 512 KiB L3: 4 MiB 
  Speed: 2594 MHz min/max: N/A 
  Core speeds (MHz): No speed data found for 4 cores. 
  Features: 3dnow 3dnow2 3dnowp abm amcr8 apic cflush cmov cmpleg cx16 cx8 de 
  eapicsp ffxsr fpu fxsr htt ibs itsc lahf long masse mca mce mmx mmxx msr 
  mtrr mwait nxe osvw pae page1gb pat pge popcnt pse pse36 rdtscp sep skinit 
  sse sse2 sse3 sse4a svm tsc vme 
  Vulnerabilities: No CPU vulnerability/bugs data available. 
Graphics:
  Device-1: ATI Radeon HD 4200 driver: N/A bus-ID: 1:5.0 chip-ID: 1002:9710 
  class-ID: 0300 
  Display: server: X.org 1.20.8 driver: loaded: ati,radeon 
  unloaded: modesetting tty: 120x33 
  Message: Unable to show advanced data. Required tool glxinfo missing. 
Audio:
  Device-1: ATI SBx00 HD Audio driver: N/A bus-ID: 0:20.2 chip-ID: 1002:4383 
  class-ID: 0403 
  Sound Server-1: sndio v: N/A running: yes 
Network:
  Device-1: Realtek 8168 driver: N/A port: N/A bus-ID: 2:0.0 
  chip-ID: 10ec:8168 class-ID: 0200 
  IF-ID-1: re0 state: active speed: 1000baseT 
  duplex: full-duplex,rxpause,txpause mac: <filter> 
  IP v4: <filter> scope: N/A broadcast: <filter> 
  WAN IP: <filter> 
Bluetooth:
  Message: No Bluetooth data was found. 
Logical:
  Message: No BSD support for LVM data. 
RAID:
  Message: No RAID data was found. 
Drives:
  Local Storage: total: 698.64 GiB used: 3.09 GiB (0.4%) 
  SMART Message: Required tool smartctl not installed. Check --recommends 
  ID-1: /dev/sd0 vendor: Seagate model: ST3750528AS size: 698.64 GiB 
  block-size: physical: 512 B logical: N/A serial: N/A 
  ID-2: /dev/sd1 type: removable model: Compact Flash size: N/A serial: N/A 
  ID-3: /dev/sd2 type: removable model: SM/xD-Picture size: N/A serial: N/A 
  ID-4: /dev/sd3 type: removable model: SD/MMC size: N/A serial: N/A 
  ID-5: /dev/sd4 type: removable model: MS/MS-Pro size: N/A serial: N/A 
  Optical-1: /dev/cd0 vendor: hp model: DVD-RAM GH40L rev: RB0A dev-links: N/A 
  Features: speed: N/A multisession: N/A audio: N/A dvd: yes rw: cd-r,dvd-ram 
  state: N/A 
Partition:
  ID-1: / size: 985.8 MiB used: 133.6 MiB (13.5%) fs: ffs dev: /dev/sd0a 
  label: N/A uuid: N/A 
  ID-2: /home size: 295.27 GiB used: 55.4 MiB (0.0%) fs: ffs dev: /dev/sd0k 
  label: N/A uuid: N/A 
  ID-3: /tmp size: 3.87 GiB used: 12 KiB (0.0%) fs: ffs dev: /dev/sd0d 
  label: N/A uuid: N/A 
  ID-4: /usr size: 5.81 GiB used: 1.09 GiB (18.7%) fs: ffs dev: /dev/sd0f 
  label: N/A uuid: N/A 
  ID-5: /usr/X11R6 size: 985.8 MiB used: 234 MiB (23.7%) fs: ffs 
  dev: /dev/sd0g label: N/A uuid: N/A 
  ID-6: /usr/local size: 19.37 GiB used: 1.58 GiB (8.2%) fs: ffs 
  dev: /dev/sd0h label: N/A uuid: N/A 
  ID-7: /usr/obj size: 5.81 GiB used: 2 KiB (0.0%) fs: ffs dev: /dev/sd0j 
  label: N/A uuid: N/A 
  ID-8: /usr/src size: 1.93 GiB used: 2 KiB (0.0%) fs: ffs dev: /dev/sd0i 
  label: N/A uuid: N/A 
  ID-9: /var size: 18.85 GiB used: 11.5 MiB (0.1%) fs: ffs dev: /dev/sd0e 
  label: N/A uuid: N/A 
Swap:
  ID-1: swap-1 type: partition size: 7.98 GiB used: 0 KiB (0.0%) 
  dev: /dev/sd0b label: N/A uuid: N/A 
Unmounted:
  Message: No Unmounted partition data found for this BSD system. 
USB:
  Hub-1: 0-01:01 info: ATI EHCI root hub ports: N/A rev: N/A 
  chip-ID: 1002:0000 
  Device-1: 0-02:02 info: Generic USB2.0-CRW type: N/A driver: umass rev: N/A 
  power: 500mA chip-ID: 0bda:0151 
  Hub-2: 1-01:01 info: ATI EHCI root hub ports: N/A rev: N/A 
  chip-ID: 1002:0000 
  Hub-3: 2-01:01 info: ATI OHCI root hub ports: N/A rev: N/A 
  chip-ID: 1002:0000 
  Device-1: 2-02:02 info: Microsoft Comfort Curve Keyboard 2000 type: HID 
  driver: uhidev rev: 1.0 speed: 1.5 Mb/s power: 100mA chip-ID: 045e:00dd 
  Hub-4: 3-01:01 info: ATI OHCI root hub ports: N/A rev: N/A 
  chip-ID: 1002:0000 
  Device-1: 3-02:02 info: Primax USB Optical Mouse type: HID driver: uhidev 
  rev: 1.0 speed: 1.5 Mb/s power: 98mA chip-ID: 0461:4d64 
  Hub-5: 4-01:01 info: ATI OHCI root hub ports: N/A rev: N/A 
  chip-ID: 1002:0000 
  Hub-6: 5-01:01 info: ATI OHCI root hub ports: N/A rev: N/A 
  chip-ID: 1002:0000 
  Hub-7: 6-01:01 info: ATI OHCI root hub ports: N/A rev: N/A 
  chip-ID: 1002:0000 
Sensors:
  Platform: No OS support. Is a comparable Openbsd sensors tool available? 
Repos:
  Packages: pkg_info: 96 lib: 23 
  OpenBSD pkg mirror: /etc/installurl 
  1: https://cdn.openbsd.org/pub/OpenBSD
Processes:
  CPU top: 5 of 38 
  1: cpu: 0.0% command: init pid: 1 mem: 0.41 MiB (0.0%) 
  2: cpu: 0.0% command: slaacd pid: 73041 mem: 0.58 MiB (0.0%) 
  3: cpu: 0.0% command: slaacd: pid: 58882 mem: 0.66 MiB (0.0%) 
  4: cpu: 0.0% command: slaacd: pid: 29126 mem: 0.69 MiB (0.0%) 
  5: cpu: 0.0% command: dhclient: pid: 95796 mem: 0.52 MiB (0.0%) 
  Memory top: 5 of 38 
  1: mem: 50.9 MiB (0.6%) command: x pid: 97856 cpu: 0.0% 
  2: mem: 31.2 MiB (0.4%) command: pinxi started by: perl pid: 51708 cpu: 0.0% 
  3: mem: 6.73 MiB (0.1%) command: xenodm: pid: 59341 cpu: 0.0% 
  4: mem: 4.05 MiB (0.1%) command: smtpd: pid: 33983 cpu: 0.0% 
  5: mem: 4.02 MiB (0.1%) command: smtpd: pid: 7768 cpu: 0.0% 
Info:
  Processes: 38 Uptime: 3m Init: init (BSD) v: N/A tool: /etc/rc.d Compilers: 
  gcc: 4.2.1 clang: 10.0.1 Shell: ksh v: 5.2.14_99/07/13.2 pinxi: 3.3.01-109
 
OpenBSD has started booting to a graphical login... not sure why, but that's okay with me. I'm using CTRL-ALT-F1 to get a root tty, as I'm also doing with NomadBSD.

But no running: in tty
 
Ok, now I am truly puzzled, my bsd installs were largely barebones except for when I added the xorg/openbox parts.

I should have asked you this before, but on each of those, which are still not showing the Console: tty ... or running-in: tty ...
can you run the 'tty' command? and just show that output. Also run this to double check something:

tty && echo yes || echo no

that will show if the output goes to stdout or stderr.

This absence is utterly inexplicable to me at this point, but it has to be something, because you are managing to make it always happen, which can't be a coincidence, yet we've done largely the same installs, tested in the same ways, give or take. Yet in no case are your installs returning tty data.
 
h2-1 said:
Ok, now I am truly puzzled, my bsd installs were largely barebones except for when I added the xorg/openbox parts.
Click to expand...
Nomad is pre-made, so it has whatever they designed. OpenBSD and the Asus have X and a few apps, like Firefox, Thunderbird, a few others. The HP laptop with FreeBSD 13 is very barebones, no Xorg or anything.

Back soon with the tty command results....
 
Will add each with edits to this post....

3 of the 4 show this output below:
/dev/ttyv0
yes

OpenBSD gives this:
/dev/ttyC0
yes
 
Last edited:
You must log in or register to reply here.

Staff online

Members online

Total: 777 (members: 6, guests: 771)

Latest posts

Top