So I will be honest I am still new to linux and mostly used Arch. However when I learning hypervisors I started using proxmox which is Debian and that is the system I am having an issue with. Currently I got four 16tb wd red drives on an HBA card, 2 m.2 drives, and a single 10tb WD red on the motherboards sata controller. When I boot currently I am passing nothing but the video card to a VM so all the drives show up in lsblk. But any attempt to do ANYTHING to the 10tb drive, currently /dev/sda fails. I had this issue before and RMA'ed the drive but this one is also acting up. I tried it on a different machine which only saw it once but also failed to write to it or format it.
When trying to run fdisk -l /dev/sda I get "cannot open /dev/sda: Input/output error" so I ran dmesg and got some output I am not sure how to interpret as I've never seen it before. I've included the bottom chunk of it. So at this point I am trying to work out if the drive is bad, did I brick the drive, or is the motherboard having issues since I think this started when I added the HBA card.
[47493.275023] ata7.00: ATA Identify Device Log not supported
[47493.275900] ata7.00: failed to enable AA (error_mask=0x1)
[47493.276141] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.276143] ata7.00: NCQ Send/Recv Log not supported
[47493.276385] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.276387] ata7.00: NCQ Send/Recv Log not supported
[47493.276625] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.276626] ata7.00: ATA Identify Device Log not supported
[47493.276867] ata7.00: configured for UDMA/133 (device error ignored)
[47493.276879] ata7: EH complete
[47493.297941] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[47493.297946] ata7.00: irq_stat 0x40000001
[47493.297950] ata7.00: failed command: READ DMA
[47493.297951] ata7.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 16 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/40 Emask 0x1 (device error)
[47493.297956] ata7.00: status: { DRDY ERR }
[47493.297957] ata7.00: error: { ABRT }
[47493.298306] ata7.00: failed to enable AA (error_mask=0x1)
[47493.298554] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.298555] ata7.00: NCQ Send/Recv Log not supported
[47493.298798] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.298799] ata7.00: NCQ Send/Recv Log not supported
[47493.299041] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.299042] ata7.00: ATA Identify Device Log not supported
[47493.299910] ata7.00: failed to enable AA (error_mask=0x1)
[47493.300152] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.300154] ata7.00: NCQ Send/Recv Log not supported
[47493.300394] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.300395] ata7.00: NCQ Send/Recv Log not supported
[47493.300634] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.300635] ata7.00: ATA Identify Device Log not supported
[47493.300872] ata7.00: configured for UDMA/133 (device error ignored)
[47493.300886] sd 6:0:0:0: [sda] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[47493.300888] sd 6:0:0:0: [sda] tag#16 Sense Key : Illegal Request [current]
[47493.300889] sd 6:0:0:0: [sda] tag#16 Add. Sense: Unaligned write command
[47493.300890] sd 6:0:0:0: [sda] tag#16 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
[47493.300891] blk_update_request: I/O error, dev sda, sector 0 op 0x0READ) flags 0x0 phys_seg 1 prio class 0
[47493.300894] Buffer I/O error on dev sda, logical block 0, async page read
[47493.300899] ata7: EH complete
root@proxmox:~#
When trying to run fdisk -l /dev/sda I get "cannot open /dev/sda: Input/output error" so I ran dmesg and got some output I am not sure how to interpret as I've never seen it before. I've included the bottom chunk of it. So at this point I am trying to work out if the drive is bad, did I brick the drive, or is the motherboard having issues since I think this started when I added the HBA card.
[47493.275023] ata7.00: ATA Identify Device Log not supported
[47493.275900] ata7.00: failed to enable AA (error_mask=0x1)
[47493.276141] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.276143] ata7.00: NCQ Send/Recv Log not supported
[47493.276385] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.276387] ata7.00: NCQ Send/Recv Log not supported
[47493.276625] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.276626] ata7.00: ATA Identify Device Log not supported
[47493.276867] ata7.00: configured for UDMA/133 (device error ignored)
[47493.276879] ata7: EH complete
[47493.297941] ata7.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[47493.297946] ata7.00: irq_stat 0x40000001
[47493.297950] ata7.00: failed command: READ DMA
[47493.297951] ata7.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 16 dma 4096 in
res 51/04:08:00:00:00/00:00:00:00:00/40 Emask 0x1 (device error)
[47493.297956] ata7.00: status: { DRDY ERR }
[47493.297957] ata7.00: error: { ABRT }
[47493.298306] ata7.00: failed to enable AA (error_mask=0x1)
[47493.298554] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.298555] ata7.00: NCQ Send/Recv Log not supported
[47493.298798] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.298799] ata7.00: NCQ Send/Recv Log not supported
[47493.299041] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.299042] ata7.00: ATA Identify Device Log not supported
[47493.299910] ata7.00: failed to enable AA (error_mask=0x1)
[47493.300152] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.300154] ata7.00: NCQ Send/Recv Log not supported
[47493.300394] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.300395] ata7.00: NCQ Send/Recv Log not supported
[47493.300634] ata7.00: Read log 0x00 page 0x00 failed, Emask 0x1
[47493.300635] ata7.00: ATA Identify Device Log not supported
[47493.300872] ata7.00: configured for UDMA/133 (device error ignored)
[47493.300886] sd 6:0:0:0: [sda] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=0s
[47493.300888] sd 6:0:0:0: [sda] tag#16 Sense Key : Illegal Request [current]
[47493.300889] sd 6:0:0:0: [sda] tag#16 Add. Sense: Unaligned write command
[47493.300890] sd 6:0:0:0: [sda] tag#16 CDB: Read(16) 88 00 00 00 00 00 00 00 00 00 00 00 00 08 00 00
[47493.300891] blk_update_request: I/O error, dev sda, sector 0 op 0x0READ) flags 0x0 phys_seg 1 prio class 0
[47493.300894] Buffer I/O error on dev sda, logical block 0, async page read
[47493.300899] ata7: EH complete
root@proxmox:~#