More SWAP on LUKS?

[linuxorgy]

well that is too extreme and complicated for me, I just want to solve a problem quickly and move on with me life

 

[wizardfromoz]

@linuxorgy when you are sure this is solved, you can mark it as such by going to your first post, and at top right click the 3 dots to the right of Watch and do as follows

Only when you are sure

Chris Turner
wizardfromoz

 

[linuxorgy]

lspci -v -s 00:02.0
00:02.0 VGA compatible controller: Intel Corporation Alder Lake-P GT2 [Iris Xe Graphics] (rev 0c) (prog-if 00 [VGA controller])
        Subsystem: LG Electronics, Inc. Device 0449
        Flags: bus master, fast devsel, latency 0, IRQ 160, IOMMU group 0
        Memory at 603c000000 (64-bit, non-prefetchable) [size=16M]
        Memory at 4000000000 (64-bit, prefetchable) [size=256M]
        I/O ports at 2000 [size=64]
        Expansion ROM at 000c0000 [virtual] [disabled] [size=128K]
        Capabilities: [40] Vendor Specific Information: Len=0c <?>
        Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00
        Capabilities: [ac] MSI: Enable+ Count=1/1 Maskable+ 64bit-
        Capabilities: [d0] Power Management version 2
        Capabilities: [100] Process Address Space ID (PASID)
        Capabilities: [200] Address Translation Service (ATS)
        Capabilities: [300] Page Request Interface (PRI)
        Capabilities: [320] Single Root I/O Virtualization (SR-IOV)
        Kernel driver in use: i915
        Kernel modules: i915

 

[Aristarchus]

You can configure zswap. This way you do 't have to increase existing swap size. You can also try zram.