Yes, I did pinxi -U each time. I'll run through them again shortly with the 105 patch.
Testers for next inxi (pinxi) - USB, Bluetooth, USB upgrades
- Thread starter h2-1
- Start date
Then I forgot to commit last night, sorry about that. the only line that should have been impacted is -Ia
the L2 / L3 cache issue mystifies me, can you show the following:
the L2 / L3 cache issue mystifies me, can you show the following:
Code:
grep -E '^cpu[0-9]?:' /var/run/dmesg.boot
sysctl -a | grep -E '^(hw\.l[1-3]|hw\.model|machdep\.cpu)'
Last edited:
oops, sorry, it's 'sysctl', I'm getting frazzled, but this is very close now, the L2 / L3 mixup is the only actual thing I see that can be handled if it's not a FreeBSD bug. I'm getting no data at all for that however on FreeBSD, NomadBSD, Dragonfly in vm, but I do for netbsd and openbsd.
Oops, I just deleted the first report.... I had forgot to update pinxi that time.
So this below is from OpenBSD installed on HP desktop. Pinxi is now patch -106.
and
So this below is from OpenBSD installed on HP desktop. Pinxi is now patch -106.
Code:
cpu0: AMD Phenom(tm) II X4 810 Processor, 2593.82 MHz, 10-04-02
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache, 4MB 64b/line 64-way L3 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, IBE
cpu0: AMD Phenom(tm) II X4 810 Processor, 2593.85 MHz, 10-04-02
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache, 4MB 64b/line 64-way L3 cache
cpu0: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu0: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu0: AMD erratum 721 detected and fixed
cpu0: smt 0, core 0, package 0
cpu0: apic clock running at 199MHz
cpu0: mwait min=64, max=64, IBE
cpu1: AMD Phenom(tm) II X4 810 Processor, 2593.51 MHz, 10-04-02
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache, 4MB 64b/line 64-way L3 cache
cpu1: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu1: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu1: AMD erratum 721 detected and fixed
cpu1: smt 0, core 1, package 0
cpu2: AMD Phenom(tm) II X4 810 Processor, 2593.51 MHz, 10-04-02
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache, 4MB 64b/line 64-way L3 cache
cpu2: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu2: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu2: AMD erratum 721 detected and fixed
cpu2: smt 0, core 2, package 0
cpu3: AMD Phenom(tm) II X4 810 Processor, 2593.51 MHz, 10-04-02
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,MWAIT,CX16,POPCNT,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,3DNOW2,3DNOW,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,ITSC
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache, 4MB 64b/line 64-way L3 cache
cpu3: ITLB 32 4KB entries fully associative, 16 4MB entries fully associative
cpu3: DTLB 48 4KB entries fully associative, 48 4MB entries fully associative
cpu3: AMD erratum 721 detected and fixed
cpu3: smt 0, core 3, package 0
cpu0: 2593 MHz: speeds: 2600 1900 1400 800 MHzand
Code:
hw.model=AMD Phenom(tm) II X4 810 Processor
machdep.cpuvendor=AuthenticAMD
machdep.cpuid=0x100f42
machdep.cpufeature=0x179bfbffWell, of course, updating pinxi does not affect the commands I'm running now. LOL
Here again is the ASUS laptop with FreeBSD 12.2 installed, running as regular user in terminal. Wow, what a difference from OpenBSD!
Here again is the ASUS laptop with FreeBSD 12.2 installed, running as regular user in terminal. Wow, what a difference from OpenBSD!
Code:
stan@freebsd:~ $ grep -E '^cpu[0-9]?:' /var/run/dmesg.boot
cpu0: <ACPI CPU> on acpi0
stan@freebsd:~ $ sysctl -a | grep -E '^(hw\.l[1-3]|hw\.model|machdep\.cpu)'
hw.model: AMD E1-1200 APU with Radeon(tm) HD GraphicsThis is the NomadBSD Live USB running on similar HP desktop as regular user in terminal.
Code:
nomad@NomadBSD$ grep -E '^cpu[0-9]?:' /var/run/dmesg.boot
cpu0: <ACPI CPU> on acpi0
nomad@NomadBSD$ sysctl -a | grep -E '^(hw\.l[1-3]|hw\.model|machdep\.cpu)'
hw.model: AMD Phenom(tm) II X4 810 ProcessorFreeBSD 13 RC2 is installed on a HP laptop. The outputs there are:
Code:
grep -E '^cpu[0-9]?:' /var/run/dmesg.boot
cpu0: <ACPI CPU> on acpi0
sysctl -a | grep -E '^(hw\.l[1-3]|hw\.model|machdep\.cpu)'
hw.model: Intel(R) Pentium(R) CPU N3540 @ 2.16GHzI will hold off on erasing OpenBSD and installing FreeBSD 12.2-p4 on that HP desktop again, unless you think it would be important. The Live NomadBSD is based on the 12.2 release, and I would guess that it is giving very similar, if not exact, results (unless you want to examine hard drives). But it is easy enough to re-install too... I am getting better at it. Your call.
I'm confused, the item in question here is -Ca, your FreeBSD samples have shown L1 and L2 cache, but these are the only places pinxi is getting the L cache data, so this is a puzzle. OpenBSD is tested and works fine, no issues there.
This is the item in question:
This is the item in question:
Code:
CPU:
Info: Quad Core model: AMD Phenom II X4 810 bits: 64 type: MCP arch: K10
family: 10 (16) model-id: 4 stepping: 2 microcode: 100F42 cache: L1: 512 KiB
L2: N/A L3: 4 MiB
Last edited:
I just realized what it has to be, it must be the fallback test pinxi does for cpu data if root and dmidecode data, that must be coming from dmidecode, that explains it. If you run --dbg 2 as sudo/root. Note the dmidecode data is sorted by type, so you want number 7, that's the source of the error, I should have realized, I'm not getting much dmidecode data in a vm, so that's a key difference. I can't find the cause still however, you'd have to show the 3 blocks, for L1, L2, and L3 cache.
I suspect this is not in fact any error in pinxi, but in dmidecode data, given your other tests showed no results for L caches at all.
I suspect this is not in fact any error in pinxi, but in dmidecode data, given your other tests showed no results for L caches at all.
Code:
pinxi -Cxxx --dbg 2
[
7,
43,
'cache',
'Socket Designation: L3 - Cache',
'Configuration: Enabled, Not Socketed, Level 3',
'Operational Mode: Write Back',
'Location: Internal',
'Installed Size: 16 MB',
'Maximum Size: 16 MB',
'Supported SRAM Types:',
'~Pipeline Burst',
'Installed SRAM Type: Pipeline Burst',
'Speed: 1 ns',
'Error Correction Type: Multi-bit ECC',
'System Type: Unified',
'Associativity: 16-way Set-associative'
],
Last edited:
I ran your debug command (pinxi -Cxxx --dbg 2) on the 4 setups. OpenBSD has a nice output, I guess because you said it has no issues. But I will include it too for comparison. These are all the full output from the command, running as root, with pinxi-106 on all.
]
Code:
CPU:
Info: Quad Core model: AMD Phenom II X4 810 bits: 64 type: MCP arch: K10
rev: 2 cache: L1: 64 KiB L2: 512 KiB L3: 4 MiB
features: pae sse sse2 sse3 sse4a svm
Speed: 2593 MHz min/max: N/A
Core speeds (MHz): No speed data found for 4 cores.
Code:
$VAR1 = [
[
0,
0,
'bios',
'Vendor: American Megatrends Inc.',
'Version: X401U.204',
'Release Date: 05/08/2012',
'Address: 0xF0000',
'Runtime Size: 64 kB',
'ROM Size: 1 MB',
'Characteristics:',
'~PCI is supported',
'~BIOS is upgradeable',
'~BIOS shadowing is allowed',
'~Boot from CD is supported',
'~Selectable boot is supported',
'~EDD is supported',
'~5.25"/1.2 MB floppy services are supported (int 13h)',
'~3.5"/720 kB floppy services are supported (int 13h)',
'~3.5"/2.88 MB floppy services are supported (int 13h)',
'~Print screen service is supported (int 5h)',
'~8042 keyboard services are supported (int 9h)',
'~Serial services are supported (int 14h)',
'~Printer services are supported (int 17h)',
'~ACPI is supported',
'~USB legacy is supported',
'~Smart battery is supported',
'~BIOS boot specification is supported',
'~Targeted content distribution is supported',
'~UEFI is supported',
'BIOS Revision: 4.6'
],
[
1,
1,
'system',
'Manufacturer: ASUSTeK COMPUTER INC.',
'Product Name: X401U',
'Version: 1.0',
'Serial Number: C6N0BC51628026H',
'UUID: 58435451-314a-304c-4532-10bf489f8e34',
'Wake-up Type: Power Switch',
'SKU Number: SKU',
'Family: X'
],
[
2,
2,
'base board',
'Manufacturer: ASUSTeK COMPUTER INC.',
'Product Name: X401U',
'Version: 1.0',
'Serial Number: BSN12345678901234567',
'Asset Tag: ATN12345678901234567',
'Features:',
'~Board is a hosting board',
'~Board is replaceable',
'Location In Chassis: MIDDLE',
'Chassis Handle: 0x0003',
'Type: Motherboard',
'Contained Object Handles: 0'
],
[
3,
3,
'chassis',
'Manufacturer: ASUSTeK COMPUTER INC.',
'Type: Notebook',
'Lock: Present',
'Version: 1.0',
'Serial Number: CSN12345678901234567',
'Asset Tag: ATN12345678901234567',
'Boot-up State: Safe',
'Power Supply State: Safe',
'Thermal State: Safe',
'Security Status: None',
'OEM Information: 0x00000000',
'Height: Unspecified',
'Number Of Power Cords: 1',
'Contained Elements: 0',
'SKU Number: To be filled by O.E.M.'
],
[
4,
48,
'processor',
'Socket Designation: P0',
'Type: Central Processor',
'Family: E-Series',
'Manufacturer: AuthenticAMD',
'ID: FF FB 8B 17 20 0F 50 00',
'Signature: Family 11, Model 15, Stepping 15',
'Flags:',
'~MSR (Model specific registers)',
'~CX8 (CMPXCHG8 instruction supported)',
'~APIC (On-chip APIC hardware supported)',
'~SEP (Fast system call)',
'~ACPI (ACPI supported)',
'Version: AMD E1-1200 APU with Radeon(tm) HD Graphics',
'Voltage: 1.4 V',
'External Clock: 100 MHz',
'Max Speed: 1400 MHz',
'Current Speed: 1400 MHz',
'Status: Populated, Enabled',
'Upgrade: None',
'L1 Cache Handle: 0x0000',
'L2 Cache Handle: 0x0000',
'L3 Cache Handle: Not Provided',
'Serial Number: Not Specified',
'Asset Tag: Not Specified',
'Part Number: Not Specified',
'Core Count: 2',
'Core Enabled: 2',
'Thread Count: 2',
'Characteristics:',
'~64-bit capable'
],
[
7,
46,
'cache',
'Socket Designation: L1 CACHE',
'Configuration: Enabled, Not Socketed, Level 1',
'Operational Mode: Write Back',
'Location: Internal',
'Installed Size: 128 kB',
'Maximum Size: 128 kB',
'Supported SRAM Types:',
'~Pipeline Burst',
'Installed SRAM Type: Pipeline Burst',
'Speed: 1 ns',
'Error Correction Type: Multi-bit ECC',
'System Type: Unified',
'Associativity: 2-way Set-associative'
],
[
7,
47,
'cache',
'Socket Designation: L2 CACHE',
'Configuration: Enabled, Not Socketed, Level 2',
'Operational Mode: Write Back',
'Location: Internal',
'Installed Size: 1 MB',
'Maximum Size: 1 MB',
'Supported SRAM Types:',
'~Pipeline Burst',
'Installed SRAM Type: Pipeline Burst',
'Speed: 1 ns',
'Error Correction Type: Multi-bit ECC',
'System Type: Unified',
'Associativity: 16-way Set-associative'
],
[
8,
4,
'port connector',
'Internal Reference Designator: J1A1',
'Internal Connector Type: None',
'External Reference Designator: PS2Mouse',
'External Connector Type: PS/2',
'Port Type: Mouse Port'
],
[
8,
5,
'port connector',
'Internal Reference Designator: J1A1',
'Internal Connector Type: None',
'External Reference Designator: Keyboard',
'External Connector Type: PS/2',
'Port Type: Keyboard Port'
],
[
8,
6,
'port connector',
'Internal Reference Designator: J2A1',
'Internal Connector Type: None',
'External Reference Designator: TV Out',
'External Connector Type: Mini Centronics Type-14',
'Port Type: Other'
],
[
8,
7,
'port connector',
'Internal Reference Designator: J2A2A',
'Internal Connector Type: None',
'External Reference Designator: COM A',
'External Connector Type: DB-9 male',
'Port Type: Serial Port 16550A Compatible'
],
[
8,
8,
'port connector',
'Internal Reference Designator: J2A2B',
'Internal Connector Type: None',
'External Reference Designator: Video',
'External Connector Type: DB-15 female',
'Port Type: Video Port'
],
[
8,
9,
'port connector',
'Internal Reference Designator: J3A1',
'Internal Connector Type: None',
'External Reference Designator: USB1',
'External Connector Type: Access Bus (USB)',
'Port Type: USB'
],
[
8,
10,
'port connector',
'Internal Reference Designator: J3A1',
'Internal Connector Type: None',
'External Reference Designator: USB2',
'External Connector Type: Access Bus (USB)',
'Port Type: USB'
],
[
8,
11,
'port connector',
'Internal Reference Designator: J3A1',
'Internal Connector Type: None',
'External Reference Designator: USB3',
'External Connector Type: Access Bus (USB)',
'Port Type: USB'
],
[
8,
12,
'port connector',
'Internal Reference Designator: J9A1 - TPM HDR',
'Internal Connector Type: Other',
'External Reference Designator: Not Specified',
'External Connector Type: None',
'Port Type: Other'
],
[
8,
13,
'port connector',
'Internal Reference Designator: J9C1 - PCIE DOCKING CONN',
'Internal Connector Type: Other',
'External Reference Designator: Not Specified',
'External Connector Type: None',
'Port Type: Other'
],
[
8,
14,
'port connector',
'Internal Reference Designator: J2B3 - CPU FAN',
'Internal Connector Type: Other',
'External Reference Designator: Not Specified',
'External Connector Type: None',
'Port Type: Other'
],
[
8,
15,
'port connector',
'Internal Reference Designator: J6C2 - EXT HDMI',
'Internal Connector Type: Other',
'External Reference Designator: Not Specified',
'External Connector Type: None',
'Port Type: Other'
],
[
8,
16,
'port connector',
'Internal Reference Designator: J3C1 - GMCH FAN',
'Internal Connector Type: Other',
'External Reference Designator: Not Specified',
'External Connector Type: None',
'Port Type: Other'
],
[
8,
17,
'port connector',
'Internal Reference Designator: J1D1 - ITP',
'Internal Connector Type: Other',
'External Reference Designator: Not Specified',
'External Connector Type: None',
'Port Type: Other'
],
[
8,
18,
'port connector',
'Internal Reference Designator: J9E2 - MDC INTPSR',
'Internal Connector Type: Other',
'External Reference Designator: Not Specified',
'External Connector Type: None',
'Port Type: Other'
],
[
8,
19,
'port connector',
'Internal Reference Designator: J9E4 - MDC INTPSR',
'Internal Connector Type: Other',
'External Reference Designator: Not Specified',
'External Connector Type: None',
'Port Type: Other'
],
[
8,
20,
'port connector',
'Internal Reference Designator: J9E3 - LPC HOT DOCKING',
'Internal Connector Type: Other',
'External Reference Designator: Not Specified',
'External Connector Type: None',
'Port Type: Other'
],
[
8,
21,
'port connector',
'Internal Reference Designator: J9E1 - SCAN MATRIX',
'Internal Connector Type: Other',
'External Reference Designator: Not Specified',
'External Connector Type: None',
'Port Type: Other'
],
[
8,
22,
'port connector',
'Internal Reference Designator: J9G1 - LPC SIDE BAND',
'Internal Connector Type: Other',
'External Reference Designator: Not Specified',
'External Connector Type: None',
'Port Type: Other'
],
[
8,
23,
'port connector',
'Internal Reference Designator: J8F1 - UNIFIED',
'Internal Connector Type: Other',
'External Reference Designator: Not Specified',
'External Connector Type: None',
'Port Type: Other'
],
[
8,
24,
'port connector',
'Internal Reference Designator: J6F1 - LVDS',
'Internal Connector Type: Other',
'External Reference Designator: Not Specified',
'External Connector Type: None',
'Port Type: Other'
],
[
8,
25,
'port connector',
'Internal Reference Designator: J2F1 - LAI FAN',
'Internal Connector Type: Other',
'External Reference Designator: Not Specified',
'External Connector Type: None',
'Port Type: Other'
],
[
8,
26,
'port connector',
'Internal Reference Designator: J2G1 - GFX VID',
'Internal Connector Type: Other',
'External Reference Designator: Not Specified',
'External Connector Type: None',
'Port Type: Other'
],
[
8,
27,
'port connector',
'Internal Reference Designator: J1G6 - AC JACK',
'Internal Connector Type: Other',
'External Reference Designator: Not Specified',
'External Connector Type: None',
'Port Type: Other'
],
[
9,
28,
'system slot',
'Designation: J6B2',
'Type: x16 PCI Express',
'Current Usage: In Use',
'Length: Long',
'ID: 0',
'Characteristics:',
'~3.3 V is provided',
'~Opening is shared',
'~PME signal is supported',
'Bus Address: 0000:00:01.0'
],
[
9,
29,
'system slot',
'Designation: J6B1',
'Type: x1 PCI Express',
'Current Usage: In Use',
'Length: Short',
'ID: 1',
'Characteristics:',
'~3.3 V is provided',
'~Opening is shared',
'~PME signal is supported',
'Bus Address: 0000:00:1c.3'
],
[
9,
30,
'system slot',
'Designation: J6D1',
'Type: x1 PCI Express',
'Current Usage: In Use',
'Length: Short',
'ID: 2',
'Characteristics:',
'~3.3 V is provided',
'~Opening is shared',
'~PME signal is supported',
'Bus Address: 0000:00:1c.4'
],
[
10,
31,
'on board device',
'Type: Video',
'Status: Enabled',
'Description: To Be Filled By O.E.M.'
],
[
11,
32,
'oem strings',
'String 1:',
'String 2:',
'String 3:',
'String 4: 90N4OA125G0414SQ168U',
'String 5:',
'String 6:',
'String 7:',
'String 8:',
'String 9:',
'String 10:'
],
[
13,
49,
'bios language',
'Language Description Format: Long',
'Installable Languages: 1',
'~en|US|iso8859-1',
'Currently Installed Language: en|US|iso8859-1'
],
[
16,
42,
'physical memory array',
'Location: System Board Or Motherboard',
'Use: System Memory',
'Error Correction Type: None',
'Maximum Capacity: 4 GB',
'Error Information Handle: Not Provided',
'Number Of Devices: 2'
],
[
17,
44,
'memory device',
'Array Handle: 0x002A',
'Error Information Handle: Not Provided',
'Total Width: 64 bits',
'Data Width: 64 bits',
'Size: 4 GB',
'Form Factor: SODIMM',
'Set: None',
'Locator: DIMM 0',
'Bank Locator: CHANNEL A',
'Type: DDR3',
'Type Detail: Synchronous Unbuffered (Unregistered)',
'Speed: 1333 MT/s',
'Manufacturer: Elpida',
'Serial Number: 00000000',
'Asset Tag: Not Specified',
'Part Number: Not Specified',
'Rank: 1',
'Configured Memory Speed: 533 MT/s'
],
[
19,
43,
'memory array mapped address',
'Starting Address: 0x00000000000',
'Ending Address: 0x0014FFFFFFF',
'Range Size: 5376 MB',
'Physical Array Handle: 0x002A',
'Partition Width: 255'
],
[
20,
45,
'memory device mapped address',
'Starting Address: 0x00000000000',
'Ending Address: 0x000FFFFFFFF',
'Range Size: 4 GB',
'Physical Device Handle: 0x002C',
'Memory Array Mapped Address Handle: 0x002B',
'Partition Row Position: 2',
'Interleave Position: Unknown',
'Interleaved Data Depth: Unknown'
]
];
CPU:
Info: Dual Core model: AMD E1-1200 APU with Radeon HD Graphics bits: 64
type: MCP arch: Bobcat rev: 0 cache: L1: 128 KiB L2: N/A
features: lm nx pae sse sse2 sse3 sse4a ssse3 svm
Speed: 1397 MHz min/max: 777/1400 MHz volts: 1.4 V ext-clock: 100 MHz
Core speeds (MHz): No speed data found for 2 cores.
Code:
$VAR1 = [
[
0,
0,
'bios',
'Vendor: Insyde',
'Version: F.14',
'Release Date: 07/28/2014',
'Address: 0xF0000',
'Runtime Size: 64 kB',
'ROM Size: 4608 kB',
'Characteristics:',
'~PCI is supported',
'~BIOS is upgradeable',
'~BIOS shadowing is allowed',
'~Boot from CD is supported',
'~Selectable boot is supported',
'~EDD is supported',
'~8042 keyboard services are supported (int 9h)',
'~Serial services are supported (int 14h)',
'~Printer services are supported (int 17h)',
'~CGA/mono video services are supported (int 10h)',
'~ACPI is supported',
'~USB legacy is supported',
'~ATAPI Zip drive boot is supported',
'~BIOS boot specification is supported',
'~Function key-initiated network boot is supported',
'~Targeted content distribution is supported',
'BIOS Revision: 15.20',
'Firmware Revision: 57.36'
],
[
1,
1,
'system',
'Manufacturer: Hewlett-Packard',
'Product Name: HP Pavilion 11 x360 PC',
'Version: 0975100002405F00010420180',
'Serial Number: CND4388D2W',
'UUID: 8d718f4c-7a3d-e411-b2a0-3464a9c439eb',
'Wake-up Type: Power Switch',
'SKU Number: F9J18UA#ABA',
'Family: 103C_5335KV G=N L=CON B=HP S=PAV X=MIN'
],
[
2,
2,
'base board',
'Manufacturer: Hewlett-Packard',
'Product Name: 2209',
'Version: 57.36',
'Serial Number: PEQADB21U7HSFK',
'Asset Tag: Type2 - Board Asset Tag',
'Features:',
'~Board is a hosting board',
'~Board is replaceable',
'Location In Chassis: Type2 - Board Chassis Location',
'Chassis Handle: 0x0003',
'Type: Motherboard',
'Contained Object Handles: 0'
],
[
3,
3,
'chassis',
'Manufacturer: Hewlett-Packard',
'Type: Notebook',
'Lock: Not Present',
'Version: Chassis Version',
'Serial Number: Chassis Serial Number',
'Asset Tag: Chassis Asset Tag',
'Boot-up State: Safe',
'Power Supply State: Safe',
'Thermal State: Safe',
'Security Status: None',
'OEM Information: 0x0000005F',
'Height: Unspecified',
'Number Of Power Cords: 1',
'Contained Elements: 0',
'SKU Number: Not Specified'
],
[
4,
4,
'processor',
'Socket Designation: CPU 1',
'Type: Central Processor',
'Family: Atom',
'Manufacturer: Intel(R) Corporation',
'ID: 78 06 03 00 FF FB EB BF',
'Signature: Type 0, Family 6, Model 55, Stepping 8',
'Flags:',
'~FPU (Floating-point unit on-chip)',
'~VME (Virtual mode extension)',
'~DE (Debugging extension)',
'~PSE (Page size extension)',
'~TSC (Time stamp counter)',
'~MSR (Model specific registers)',
'~PAE (Physical address extension)',
'~MCE (Machine check exception)',
'~CX8 (CMPXCHG8 instruction supported)',
'~APIC (On-chip APIC hardware supported)',
'~SEP (Fast system call)',
'~MTRR (Memory type range registers)',
'~PGE (Page global enable)',
'~MCA (Machine check architecture)',
'~CMOV (Conditional move instruction supported)',
'~PAT (Page attribute table)',
'~PSE-36 (36-bit page size extension)',
'~CLFSH (CLFLUSH instruction supported)',
'~DS (Debug store)',
'~ACPI (ACPI supported)',
'~MMX (MMX technology supported)',
'~FXSR (FXSAVE and FXSTOR instructions supported)',
'~SSE (Streaming SIMD extensions)',
'~SSE2 (Streaming SIMD extensions 2)',
'~SS (Self-snoop)',
'~HTT (Multi-threading)',
'~TM (Thermal monitor supported)',
'~PBE (Pending break enabled)',
'Version: Intel(R) Pentium(R) CPU N3540 @ 2.16GHz',
'Voltage: 0.9 V',
'External Clock: 83 MHz',
'Max Speed: 2656 MHz',
'Current Speed: 2179 MHz',
'Status: Populated, Enabled',
'Upgrade: None',
'L1 Cache Handle: 0x0006',
'L2 Cache Handle: 0x0007',
'L3 Cache Handle: Not Provided',
'Serial Number: Not Specified',
'Asset Tag: Not Specified',
'Part Number: Not Specified',
'Core Count: 4',
'Core Enabled: 4',
'Thread Count: 1',
'Characteristics:',
'~64-bit capable',
'~Multi-Core',
'~Execute Protection',
'~Enhanced Virtualization',
'~Power/Performance Control'
],
[
7,
5,
'cache',
'Socket Designation: Unknown',
'Configuration: Enabled, Not Socketed, Level 1',
'Operational Mode: Write Back',
'Location: Internal',
'Installed Size: 24 kB',
'Maximum Size: 24 kB',
'Supported SRAM Types:',
'~Synchronous',
'Installed SRAM Type: Synchronous',
'Speed: Unknown',
'Error Correction Type: Single-bit ECC',
'System Type: Data',
'Associativity: Fully Associative'
],
[
7,
6,
'cache',
'Socket Designation: Unknown',
'Configuration: Enabled, Not Socketed, Level 1',
'Operational Mode: Write Back',
'Location: Internal',
'Installed Size: 32 kB',
'Maximum Size: 32 kB',
'Supported SRAM Types:',
'~Synchronous',
'Installed SRAM Type: Synchronous',
'Speed: Unknown',
'Error Correction Type: Single-bit ECC',
'System Type: Instruction',
'Associativity: 8-way Set-associative'
],
[
7,
7,
'cache',
'Socket Designation: Unknown',
'Configuration: Enabled, Not Socketed, Level 2',
'Operational Mode: Write Back',
'Location: Internal',
'Installed Size: 1 MB',
'Maximum Size: 1 MB',
'Supported SRAM Types:',
'~Synchronous',
'Installed SRAM Type: Synchronous',
'Speed: Unknown',
'Error Correction Type: Single-bit ECC',
'System Type: Unified',
'Associativity: 16-way Set-associative'
],
[
8,
8,
'port connector',
'Internal Reference Designator: J1A2',
'Internal Connector Type: None',
'External Reference Designator: USB2.0',
'External Connector Type: Access Bus (USB)',
'Port Type: USB'
],
[
8,
9,
'port connector',
'Internal Reference Designator: J1A2',
'Internal Connector Type: None',
'External Reference Designator: USB2.0',
'External Connector Type: Access Bus (USB)',
'Port Type: USB'
],
[
8,
10,
'port connector',
'Internal Reference Designator: J2A2',
'Internal Connector Type: None',
'External Reference Designator: USB3.0 Port0',
'External Connector Type: Access Bus (USB)',
'Port Type: USB'
],
[
8,
11,
'port connector',
'Internal Reference Designator: J9D1',
'Internal Connector Type: None',
'External Reference Designator: UART to Micro USB',
'External Connector Type: Access Bus (USB)',
'Port Type: USB'
],
[
8,
12,
'port connector',
'Internal Reference Designator: CON6A1',
'Internal Connector Type: None',
'External Reference Designator: SD Card',
'External Connector Type: Other',
'Port Type: Other'
],
[
8,
13,
'port connector',
'Internal Reference Designator: J9B1',
'Internal Connector Type: None',
'External Reference Designator: Keyboard',
'External Connector Type: PS/2',
'Port Type: Keyboard Port'
],
[
8,
14,
'port connector',
'Internal Reference Designator: J9B1',
'Internal Connector Type: None',
'External Reference Designator: Mouse',
'External Connector Type: PS/2',
'Port Type: Mouse Port'
],
[
8,
15,
'port connector',
'Internal Reference Designator: J5A1',
'Internal Connector Type: None',
'External Reference Designator: Microphone',
'External Connector Type: Mini Jack (headphones)',
'Port Type: Audio Port'
],
[
8,
16,
'port connector',
'Internal Reference Designator: J5A1',
'Internal Connector Type: None',
'External Reference Designator: Line In',
'External Connector Type: Mini Jack (headphones)',
'Port Type: Audio Port'
],
[
8,
17,
'port connector',
'Internal Reference Designator: J5A1',
'Internal Connector Type: None',
'External Reference Designator: Line Out',
'External Connector Type: Mini Jack (headphones)',
'Port Type: Audio Port'
],
[
8,
18,
'port connector',
'Internal Reference Designator: J7A1',
'Internal Connector Type: None',
'External Reference Designator: Audio Jack',
'External Connector Type: Mini Jack (headphones)',
'Port Type: Audio Port'
],
[
8,
19,
'port connector',
'Internal Reference Designator: J2A2',
'Internal Connector Type: None',
'External Reference Designator: Network Rj45 Jack',
'External Connector Type: RJ-45',
'Port Type: Network Port'
],
[
8,
20,
'port connector',
'Internal Reference Designator: J4J1',
'Internal Connector Type: None',
'External Reference Designator: SATA',
'External Connector Type: SAS/SATA Plug Receptacle',
'Port Type: Other'
],
[
8,
21,
'port connector',
'Internal Reference Designator: J4E2',
'Internal Connector Type: SAS/SATA Plug Receptacle',
'External Reference Designator: SATA Cable',
'External Connector Type: None',
'Port Type: Other'
],
[
8,
22,
'port connector',
'Internal Reference Designator: J4A1',
'Internal Connector Type: None',
'External Reference Designator: VGA',
'External Connector Type: DB-15 female',
'Port Type: Video Port'
],
[
8,
23,
'port connector',
'Internal Reference Designator: J1A1',
'Internal Connector Type: None',
'External Reference Designator: Display Port',
'External Connector Type: Other',
'Port Type: Video Port'
],
[
8,
24,
'port connector',
'Internal Reference Designator: J3A1',
'Internal Connector Type: None',
'External Reference Designator: Display Port',
'External Connector Type: Other',
'Port Type: Video Port'
],
[
8,
25,
'port connector',
'Internal Reference Designator: J9B4',
'Internal Connector Type: None',
'External Reference Designator: Serial Port',
'External Connector Type: DB-9 male',
'Port Type: Serial Port 16550A Compatible'
],
[
8,
26,
'port connector',
'Internal Reference Designator: J2A1',
'Internal Connector Type: None',
'External Reference Designator: HDMI',
'External Connector Type: Other',
'Port Type: Other'
],
[
9,
27,
'system slot',
'Designation: J5C1',
'Type: x4 PCI Express x4',
'Current Usage: Available',
'Length: Other',
'ID: 0',
'Characteristics:',
'~PME signal is supported',
'~Hot-plug devices are supported',
'~SMBus signal is supported',
'Bus Address: 0000:00:00.0'
],
[
9,
28,
'system slot',
'Designation: J4B3',
'Type: x1 PCI Express x1',
'Current Usage: Available',
'Length: Other',
'ID: 0',
'Characteristics:',
'~PME signal is supported',
'~Hot-plug devices are supported',
'~SMBus signal is supported',
'Bus Address: 0000:00:00.0'
],
[
9,
29,
'system slot',
'Designation: J6C1',
'Type: x1 PCI Express x1',
'Current Usage: Available',
'Length: Other',
'ID: 0',
'Characteristics:',
'~PME signal is supported',
'~Hot-plug devices are supported',
'~SMBus signal is supported',
'Bus Address: 0000:00:00.0'
],
[
9,
30,
'system slot',
'Designation: J6D1',
'Type: x1 PCI Express x1',
'Current Usage: Available',
'Length: Other',
'ID: 0',
'Characteristics:',
'~PME signal is supported',
'~Hot-plug devices are supported',
'~SMBus signal is supported',
'Bus Address: 0000:00:00.0'
],
[
11,
31,
'oem strings',
'String 1: $HP$',
'String 2: LOC#',
'String 3: ABS 70/71 78 79 7A 7B',
'String 4: CNB1 0975100002405F00010420180',
'String 5: HP_Mute_LED_0_0',
'String 6: String6 for Original Equipment Manufacturer',
'String 7: String7 for Original Equipment Manufacturer',
'String 8: String8 for Original Equipment Manufacturer',
'String 9: String9 for Original Equipment Manufacturer',
'String 10: String10 for Original Equipment Manufacturer',
'String 11: String11 for Original Equipment Manufacturer'
],
[
12,
32,
'system configuration options',
'Option 1: String1 for Type12 Equipment Manufacturer',
'Option 2: String2 for Type12 Equipment Manufacturer',
'Option 3: String3 for Type12 Equipment Manufacturer',
'Option 4: String4 for Type12 Equipment Manufacturer',
'Option 5: String5 for Type12 Equipment Manufacturer',
'Option 6: String6 for Type12 Equipment Manufacturer',
'Option 7: String7 for Type12 Equipment Manufacturer',
'Option 8: String8 for Type12 Equipment Manufacturer'
],
[
13,
33,
'bios language',
'Language Description Format: Long',
'Installable Languages: 3',
'~en|US|iso8859-1',
'~fr|CA|iso8859-1',
'~es|ES|iso8859-1',
'Currently Installed Language: en|US|iso8859-1'
],
[
15,
34,
'system event log',
'Area Length: 0 bytes',
'Header Start Offset: 0x0000',
'Header Length: 32 bytes',
'Data Start Offset: 0x0020',
'Access Method: General-purpose non-volatile data functions',
'Access Address: 0x0000',
'Status: Valid, Not Full',
'Change Token: 0x12345678',
'Header Format: OEM-specific',
'Supported Log Type Descriptors: 3',
'Descriptor 1: POST memory resize',
'Data Format 1: None',
'Descriptor 2: POST error',
'Data Format 2: POST results bitmap',
'Descriptor 3: Log area reset/cleared',
'Data Format 3: None'
],
[
16,
35,
'physical memory array',
'Location: System Board Or Motherboard',
'Use: System Memory',
'Error Correction Type: None',
'Maximum Capacity: 8 GB',
'Error Information Handle: No Error',
'Number Of Devices: 1'
],
[
17,
36,
'memory device',
'Array Handle: 0x0023',
'Error Information Handle: No Error',
'Total Width: 64 bits',
'Data Width: 64 bits',
'Size: 4 GB',
'Form Factor: SODIMM',
'Set: None',
'Locator: Bottom',
'Bank Locator: BANK 0',
'Type: DDR3',
'Type Detail: Synchronous',
'Speed: 1333 MT/s',
'Manufacturer: Samsung',
'Serial Number: 23131825',
'Asset Tag: Unknown',
'Part Number: M471B5173QH0-YK0',
'Rank: Unknown',
'Configured Memory Speed: 1333 MT/s'
],
[
19,
37,
'memory array mapped address',
'Starting Address: 0x00000000000',
'Ending Address: 0x000FFFFFFFF',
'Range Size: 4 GB',
'Physical Array Handle: 0x0023',
'Partition Width: 1'
],
[
20,
38,
'memory device mapped address',
'Starting Address: 0x00000000000',
'Ending Address: 0x000FFFFFFFF',
'Range Size: 4 GB',
'Physical Device Handle: 0x0024',
'Memory Array Mapped Address Handle: 0x0025',
'Partition Row Position: 1'
],
[
21,
39,
'built-in pointing device',
'Type: Touch Pad',
'Interface: PS/2',
'Buttons: 2'
],
[
22,
40,
'portable battery',
'Location: Primary',
'Manufacturer: 33-42',
'Manufacture Date: 01/01/2013',
'Serial Number: SERIAL',
'Name: PL02029',
'Design Capacity: 29032 mWh',
'Design Voltage: 7600 mV',
'SBDS Version: 1',
'Maximum Error: 1%',
'SBDS Chemistry: LION',
'OEM-specific Information: 0x00000000'
],
[
26,
41,
'voltage probe',
'Description: Voltage Probe Description.',
'Location: <OUT OF SPEC>',
'Status: <OUT OF SPEC>',
'Maximum Value: Unknown',
'Minimum Value: Unknown',
'Resolution: Unknown',
'Tolerance: Unknown',
'Accuracy: Unknown',
'OEM-specific Information: 0x00000000',
'Nominal Value: Unknown'
],
[
27,
42,
'cooling device',
'Type: Chip Fan',
'Status: OK',
'OEM-specific Information: 0x00000000',
'Nominal Speed: Unknown Or Non-rotating',
'Description: Cooling Device Description.'
],
[
28,
43,
'temperature probe',
'Description: Temperature Probe Description.',
'Location: Unknown',
'Status: Unknown',
'Maximum Value: Unknown',
'Minimum Value: Unknown',
'Resolution: Unknown',
'Tolerance: Unknown',
'Accuracy: Unknown',
'OEM-specific Information: 0x00000000',
'Nominal Value: Unknown'
],
[
39,
45,
'system power supply',
'Location: OEM_Define0',
'Name: OEM_Define1',
'Manufacturer: OEM_Define2',
'Serial Number: OEM_Define3',
'Asset Tag: OEM_Define4',
'Model Part Number: OEM_Define5',
'Revision: OEM_Define6',
'Max Power Capacity: 75 W',
'Status: Present, OK',
'Type: Regulator',
'Input Voltage Range Switching: Auto-switch',
'Plugged: No',
'Hot Replaceable: No',
'Input Voltage Probe Handle: 0x0029',
'Cooling Device Handle: 0x002A'
],
[
41,
46,
'onboard device',
'Reference Designation: IGD',
'Type: Video',
'Status: Disabled',
'Type Instance: 1',
'Bus Address: 0000:00:02.0'
]
];
CPU: Info: Quad Core model: Intel Pentium N3540 bits: 64 type: MCP arch: Silvermont
rev: 8 cache: L1: 56 KiB L2: N/A
features: lm nx pae sse sse2 sse3 ssse3 vmx
Speed: 2166 MHz min/max: 498/2159 MHz volts: 0.9 V ext-clock: 83 MHz
Core speeds (MHz): No speed data found for 4 cores.
Code:
$VAR1 = [
[
0,
0,
'bios',
'Vendor: American Megatrends Inc.',
'Version: 5.00',
'Release Date: 08/03/2009',
'Address: 0xF0000',
'Runtime Size: 64 kB',
'ROM Size: 1 MB',
'Characteristics:',
'~ISA is supported',
'~PCI is supported',
'~PNP is supported',
'~BIOS is upgradeable',
'~BIOS shadowing is allowed',
'~ESCD support is available',
'~Boot from CD is supported',
'~Selectable boot is supported',
'~BIOS ROM is socketed',
'~EDD is supported',
'~5.25"/1.2 MB floppy services are supported (int 13h)',
'~3.5"/720 kB floppy services are supported (int 13h)',
'~3.5"/2.88 MB floppy services are supported (int 13h)',
'~Print screen service is supported (int 5h)',
'~8042 keyboard services are supported (int 9h)',
'~Serial services are supported (int 14h)',
'~Printer services are supported (int 17h)',
'~CGA/mono video services are supported (int 10h)',
'~ACPI is supported',
'~USB legacy is supported',
'~LS-120 boot is supported',
'~ATAPI Zip drive boot is supported',
'~BIOS boot specification is supported',
'~Function key-initiated network boot is supported',
'~Targeted content distribution is supported',
'BIOS Revision: 5.0'
],
[
1,
1,
'system',
'Manufacturer: HP-Pavilion',
'Product Name: NY549AA-ABA p6230y',
'Version:',
'Serial Number: CNX9361SXF',
'UUID: 5a408a2c-991c-11de-9f59-5e1d049040b8',
'Wake-up Type: Power Switch',
'SKU Number: NY549AA#ABA',
'Family: 103C_53316J'
],
[
2,
2,
'base board',
'Manufacturer: FOXCONN',
'Product Name: ALOE',
'Version: X3',
'Serial Number:',
'Asset Tag:',
'Features:',
'~Board is a hosting board',
'~Board is replaceable',
'Location In Chassis:',
'Chassis Handle: 0x0003',
'Type: Motherboard',
'Contained Object Handles: 0'
],
[
3,
3,
'chassis',
'Manufacturer: Hewlett-Packard',
'Type: Desktop',
'Lock: Not Present',
'Version:',
'Serial Number:',
'Asset Tag:',
'Boot-up State: Safe',
'Power Supply State: Safe',
'Thermal State: Safe',
'Security Status: None',
'OEM Information: 0x00000000',
'Height: Unspecified',
'Number Of Power Cords: 1',
'Contained Elements: 0'
],
[
4,
4,
'processor',
'Socket Designation: CPU 1',
'Type: Central Processor',
'Family: Phenom II',
'Manufacturer: AMD',
'ID: 42 0F 10 00 FF FB 8B 17',
'Signature: Family 16, Model 4, Stepping 2',
'Flags:',
'~FPU (Floating-point unit on-chip)',
'~VME (Virtual mode extension)',
'~DE (Debugging extension)',
'~PSE (Page size extension)',
'~TSC (Time stamp counter)',
'~MSR (Model specific registers)',
'~PAE (Physical address extension)',
'~MCE (Machine check exception)',
'~CX8 (CMPXCHG8 instruction supported)',
'~APIC (On-chip APIC hardware supported)',
'~SEP (Fast system call)',
'~MTRR (Memory type range registers)',
'~PGE (Page global enable)',
'~MCA (Machine check architecture)',
'~CMOV (Conditional move instruction supported)',
'~PAT (Page attribute table)',
'~PSE-36 (36-bit page size extension)',
'~CLFSH (CLFLUSH instruction supported)',
'~MMX (MMX technology supported)',
'~FXSR (FXSAVE and FXSTOR instructions supported)',
'~SSE (Streaming SIMD extensions)',
'~SSE2 (Streaming SIMD extensions 2)',
'~HTT (Multi-threading)',
'Version: AMD Phenom(tm) II X4 810 Processor',
'Voltage: 1.5 V',
'External Clock: 200 MHz',
'Max Speed: 2600 MHz',
'Current Speed: 2600 MHz',
'Status: Populated, Enabled',
'Upgrade: Other',
'L1 Cache Handle: 0x0005',
'L2 Cache Handle: 0x0006',
'L3 Cache Handle: 0x0007',
'Serial Number:',
'Asset Tag:',
'Part Number:',
'Core Count: 4',
'Core Enabled: 4',
'Characteristics:',
'~64-bit capable'
],
[
7,
5,
'cache',
'Socket Designation: L1-Cache',
'Configuration: Enabled, Not Socketed, Level 1',
'Operational Mode: Varies With Memory Address',
'Location: Internal',
'Installed Size: 512 kB',
'Maximum Size: 512 kB',
'Supported SRAM Types:',
'~Pipeline Burst',
'Installed SRAM Type: Pipeline Burst',
'Speed: Unknown',
'Error Correction Type: Single-bit ECC',
'System Type: <OUT OF SPEC>',
'Associativity: 4-way Set-associative'
],
[
7,
6,
'cache',
'Socket Designation: L2-Cache',
'Configuration: Enabled, Not Socketed, Level 2',
'Operational Mode: Varies With Memory Address',
'Location: Internal',
'Installed Size: 2 MB',
'Maximum Size: 2 MB',
'Supported SRAM Types:',
'~Pipeline Burst',
'Installed SRAM Type: Pipeline Burst',
'Speed: Unknown',
'Error Correction Type: Single-bit ECC',
'System Type: <OUT OF SPEC>',
'Associativity: 4-way Set-associative'
],
[
7,
7,
'cache',
'Socket Designation: L3-Cache',
'Configuration: Enabled, Not Socketed, Level 3',
'Operational Mode: Varies With Memory Address',
'Location: Internal',
'Installed Size: 4 MB',
'Maximum Size: 4 MB',
'Supported SRAM Types:',
'~Pipeline Burst',
'Installed SRAM Type: Pipeline Burst',
'Speed: Unknown',
'Error Correction Type: Single-bit ECC',
'System Type: <OUT OF SPEC>',
'Associativity: 4-way Set-associative'
],
[
9,
8,
'system slot',
'Designation: PCI-E x16',
'Type: x16 PCI Express',
'Current Usage: Available',
'Length: Short',
'ID: 2',
'Characteristics:',
'~3.3 V is provided',
'~Opening is shared',
'~PME signal is supported'
],
[
9,
9,
'system slot',
'Designation: MINI PCI-E x1',
'Type: x1 PCI Express',
'Current Usage: Available',
'Length: Short',
'ID: 5',
'Characteristics:',
'~3.3 V is provided',
'~Opening is shared',
'~PME signal is supported'
],
[
9,
10,
'system slot',
'Designation: PCI-E x1',
'Type: x1 PCI Express',
'Current Usage: Available',
'Length: Short',
'ID: 6',
'Characteristics:',
'~3.3 V is provided',
'~Opening is shared',
'~PME signal is supported'
],
[
9,
11,
'system slot',
'Designation: PCI-E x1',
'Type: x1 PCI Express',
'Current Usage: Available',
'Length: Short',
'ID: 7',
'Characteristics:',
'~3.3 V is provided',
'~Opening is shared',
'~PME signal is supported'
],
[
9,
12,
'system slot',
'Designation: PCI-E x1',
'Type: x1 PCI Express',
'Current Usage: Available',
'Length: Short',
'ID: 9',
'Characteristics:',
'~3.3 V is provided',
'~Opening is shared',
'~PME signal is supported'
],
[
11,
13,
'oem strings',
'String 1: bid=94NAv6PrA2;PROD_MSWORKS;SFCHK;DLED;IS.N60d;ACPwrFail=Off;Cha',
'String 2: n=Retail;CPUFan=On;DVDRW;LegacyFloppy=No;TVout=NTSC;PCBRAND=Pavi',
'String 3: lion;OS=MSV;LScribe;DVDP_STD;Vos.P;PROD_MSOFFHST;FPA=HM;C_VEN2;B',
'String 4: BUY;CDS_D;SW_Main;.YQ;##HPCPC=00000000<9000000602000000042000025',
'String 5: 3514130040000010001000;5;:0665<;85>18>1<2=1:<55>?4;;=?=19:<8494;',
'String 6: >:8011<=31953=?76?>378139;594701:=;34:;55;9128<7937==0<722<:<1:2',
'String 7: 489>:088=6:?1;2>8=8>12691>>286:9?;4454>3<3>89909>=738375;02951<;',
'String 8: >=??2?70>75;04<815:33<20846?312127;?24876>7488457<0;0?39>9;?407;',
'String 9: 8;8;09>=;==>231>;?456:100000006;00000000002000840515?454=435<494',
'String 10: 34=23405347594>444?475350210002000000000000000000000000000000000',
'String 11: 001760:<4;1?6??6:=:30393:=<:8>0733583=1;7=7:?6417;:83==335:93?17',
'String 12: 9=82=3<6<7:36018=:=05>2<7:76>9><?3=?3326<44;;515?5:05223?9=73156',
'String 13: 3>:5>:>:3?;752183168?<4641;15?1?:6;<46:36<39?682>03534:144>:?448',
'String 14: 67648=32?5=6=56:3246?<8338;8?=?=<2:3?3<237?=6>8;=91=3;>??;>?0;<3',
'String 15: 7=',
'String 16:',
'String 17:',
'String 18:',
'String 19:',
'String 20:',
'String 21:',
'String 22:',
'String 23:',
'String 24:',
'String 25:',
'String 26:',
'String 27:',
'String 28:',
'String 29:',
'String 30:',
'String 31:',
'String 32:'
],
[
13,
14,
'bios language',
'Language Description Format: Long',
'Installable Languages: 1',
'~en|US|iso8859-1',
'Currently Installed Language: en|US|iso8859-1'
],
[
15,
15,
'system event log',
'Area Length: 4 bytes',
'Header Start Offset: 0x0000',
'Header Length: 2 bytes',
'Data Start Offset: 0x0002',
'Access Method: Indexed I/O, one 16-bit index port, one 8-bit data port',
'Access Address: Index 0x046A, Data 0x046C',
'Status: Invalid, Not Full',
'Change Token: 0x00000000',
'Header Format: No Header',
'Supported Log Type Descriptors: 6',
'Descriptor 1: End of log',
'Data Format 1: OEM-specific',
'Descriptor 2: End of log',
'Data Format 2: OEM-specific',
'Descriptor 3: End of log',
'Data Format 3: OEM-specific',
'Descriptor 4: End of log',
'Data Format 4: OEM-specific',
'Descriptor 5: End of log',
'Data Format 5: OEM-specific',
'Descriptor 6: End of log',
'Data Format 6: OEM-specific'
],
[
16,
16,
'physical memory array',
'Location: System Board Or Motherboard',
'Use: System Memory',
'Error Correction Type: None',
'Maximum Capacity: 16 GB',
'Error Information Handle: Not Provided',
'Number Of Devices: 4'
],
[
17,
18,
'memory device',
'Array Handle: 0x0010',
'Error Information Handle: Not Provided',
'Total Width: 64 bits',
'Data Width: 64 bits',
'Size: 2 GB',
'Form Factor: DIMM',
'Set: None',
'Locator: DIMM0',
'Bank Locator: BANK0',
'Type: Other',
'Type Detail: Synchronous',
'Speed: 1066 MT/s',
'Manufacturer: Micron',
'Serial Number: 5BFA59D8',
'Asset Tag: AssetTagNum0',
'Part Number: 16JTF25664AZ-1G4F1',
'Rank: Unknown'
],
[
17,
19,
'memory device',
'Array Handle: 0x0010',
'Error Information Handle: Not Provided',
'Total Width: 64 bits',
'Data Width: 64 bits',
'Size: 2 GB',
'Form Factor: DIMM',
'Set: None',
'Locator: DIMM1',
'Bank Locator: BANK1',
'Type: Other',
'Type Detail: Synchronous',
'Speed: 1066 MT/s',
'Manufacturer: Micron',
'Serial Number: C9F359D8',
'Asset Tag: AssetTagNum1',
'Part Number: 16JTF25664AZ-1G4F1',
'Rank: Unknown'
],
[
17,
20,
'memory device',
'Array Handle: 0x0010',
'Error Information Handle: Not Provided',
'Total Width: 64 bits',
'Data Width: 64 bits',
'Size: 2 GB',
'Form Factor: DIMM',
'Set: None',
'Locator: DIMM2',
'Bank Locator: BANK2',
'Type: Other',
'Type Detail: Synchronous',
'Speed: 1066 MT/s',
'Manufacturer: Micron',
'Serial Number: 63FA59D8',
'Asset Tag: AssetTagNum2',
'Part Number: 16JTF25664AZ-1G4F1',
'Rank: Unknown'
],
[
17,
21,
'memory device',
'Array Handle: 0x0010',
'Error Information Handle: Not Provided',
'Total Width: 64 bits',
'Data Width: 64 bits',
'Size: 2 GB',
'Form Factor: DIMM',
'Set: None',
'Locator: DIMM3',
'Bank Locator: BANK3',
'Type: Other',
'Type Detail: Synchronous',
'Speed: 1066 MT/s',
'Manufacturer: Micron',
'Serial Number: C4F359D8',
'Asset Tag: AssetTagNum3',
'Part Number: 16JTF25664AZ-1G4F1',
'Rank: Unknown'
],
[
19,
17,
'memory array mapped address',
'Starting Address: 0x00000000000',
'Ending Address: 0x0020FFFFFFF',
'Range Size: 8448 MB',
'Physical Array Handle: 0x0010',
'Partition Width: 1'
]
];
CPU: Info: Quad Core model: AMD Phenom II X4 810 bits: 64 type: MCP arch: K10 rev: 2 cache: L1: 512 KiB L2: N/A
L3: 4 MiB
features: lm nx pae sse sse2 sse3 sse4a svm
Speed: 2593 MHz min/max: 800/2600 MHz volts: 1.5 V ext-clock: 200 MHz
Core speeds (MHz): No speed data found for 4 cores.This is puzzling, I put your raw data in from freebsd 13 rc2, and got the L2 cache back exactly as expected. This is a mystery, there's some other factor I can't figure out involved I think, I will check some other datasets to see if I can find the culprit. But that raw data reinjected directly into pinxi gave the right detections for L1 and L2 cache, no problem at all.
