Hi,
Can anyone please let me know why this kind of error or log occurs when the network is connected in loop.
My setup is : I Have 2 devices . Eth0 of first device is connected to PC , eth1 of first device is connected to eth0 of second device .
Because of this error bridge may discard the...
Hi ,
One doubt i am having the eth0 is receiving all 100 packets but the bridge is receiving only 50 packets . why this is happening can you please let me know
In First image, this is the ifconfig log of first device as you can see the bridge is receiving more than eth0 packets . It is...
yes. I am prioritizing the traffic based on the vlan priority field. Sending the traffic through the ostinato tool where in 802.1q packets we can set the vlan priority . Based on this priority the prioritization will happen .
Below is the code :
tc qdisc add dev eth0 handle ffff: ingress
tc...
Hi GatorsFan,
Currently priority and classification is happening , but packets are being discarded . Wanted to know the reason why all packets are not reaching to 4 boards equally . All 250 packets should go to all 4 boards right as i am using bridge .
Hi,
Facing one issue .
My setup is like there are 2 boards and one test PC. The pc ethernet cable is connected to eth0 port of board 1, eth1 of board1 is connected to eth0 of board 2 . On both the boards have created bridge , added both interfaces to it , assigned different ip address and...
Hi ,
I am implementing QOS in AM437x processor using linux utility traffic control(tc) which comes with iproute/iproute2 package . Implemented at layer 2 i.e have created a bridge and added the two interfaces eth0 and eth1 to it. Setup contains of 4 boards and one test PC. Connections are this...