SIOCADDRT Operation not permitted

[wallybok]

I'm a newbie with linux and I have a problem I don't know how to resolve... I'm using kali linux and I needed to add the routing table to my device with this command:

```sudo ifconfig wlan0mon up 192.168.1.1 netmask 255.255.255.0
route add -net 192.168.1.0 netmask 255.255.255.0 gw 192.168.1.1```

I get this:

```SIOCADDRT: Operation not permitted```

What can I do to unlock this command?

Thank you in advance!!

 

[tymerahir]

Hello.
You have two commands:
First: sudo ifconfig wlan0mon up 192.168.1.1 netmask 255.255.255.0
Second: route add -net 192.168.1.0 netmask 255.255.255.0 gw 192.168.1.1

You need to add 'sudo' to second command.

So, you need to executed:
sudo route add -net 192.168.1.0 netmask 255.255.255.0 gw 192.168.1.1

 

[wallybok]

Thanks! I got it!

Now I have another huge problem with dnsmasq... Are you familiar with it?

 

[tymerahir]

Ask a question, maybe I can help.

 

[captain-sensible]

Thanks! I got it!

Now I have another huge problem with dnsmasq... Are you familiar with it?

i've used it quite some time ago on a small Intranet; where a Linux machine and other clients were hooked up on a simple newtwork simply via a "switch" with no router . I ran dnsmasq on a Linux box which leased out Ip addresses to the "client" computers. What are you trying to do with dnsmasq yourself?

 

[wallybok]

Right so, I made the dnsmasq.conf file this way:

interface=wlan0mon
dhcp-range= 192.168.1.2, 192.168.1.30, 255.255.255.0, 12h
dhcp-option=3, 192.168.1.1
dhcp-option=6, 192.168.1.1
server= 8.8.8.8
log-queries
log-dhcp
listen-address= 127.0.0.1

When I hit the command:

sudo dnsmasq -C dnsmasq.conf -d

I get this:

dnsmasq: started, version 2.84rc2 cachesize 150
dnsmasq: compile time options: IPv6 GNU-getopt DBus no-UBus i18n IDN2 DHCP DHCPv6 no-Lua TFTP conntrack ipset auth cryptohash DNSSEC loop-detect inotify dumpfile
dnsmasq-dhcp: DHCP, IP range 192.168.1.2 -- 192.168.1.30, lease time 12h
dnsmasq: using nameserver 8.8.8.8#53
dnsmasq: no servers found in /etc/resolv.conf, will retry
dnsmasq: read /etc/hosts - 6 addresses

The resolv.conf file is empty and I'm not sure what it should contain to work...