No sound after upgrade to buster

[Leinad]

Hello all,
Ive done apt full-upgrade to buster and actually no application plays music.


usr/sbin/hwinfo --sound
17: PCI 1f.3: 0403 Audio device
[Created at pci.386]
Unique ID: nS1_.hBRkVrdKTN7
SysFS ID: /devices/pci0000:00/0000:00:1f.3
SysFS BusID: 0000:00:1f.3
Hardware Class: sound
Model: "Intel 100 Series/C230 Series Chipset Family HD Audio Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0xa170 "100 Series/C230 Series Chipset Family HD Audio Controller"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x86c7
Revision: 0x31
Driver: "snd_hda_intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xf7320000-0xf7323fff (rw,non-prefetchable)
Memory Range: 0xf7300000-0xf730ffff (rw,non-prefetchable)
IRQ: 125 (121106 events)
Module Alias: "pci:v00008086d0000A170sv00001043sd000086C7bc04sc03i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=new, avail=yes, need=no, active=unknown

20: PCI 100.1: 0403 Audio device
[Created at pci.386]
Unique ID: NXNs.DBvbxMgwumC
Parent ID: vSkL.PF9OjZXNRV8
SysFS ID: /devices/pci0000:00/0000:00:01.0/0000:01:00.1
SysFS BusID: 0000:01:00.1
Hardware Class: sound
Model: "nVidia GP108 High Definition Audio Controller"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x0fb8 "GP108 High Definition Audio Controller"
SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
SubDevice: pci 0x85f4
Revision: 0xa1
Driver: "snd_hda_intel"
Driver Modules: "snd_hda_intel"
Memory Range: 0xf7080000-0xf7083fff (rw,non-prefetchable)
IRQ: 17 (287642 events)
Module Alias: "pci:v000010DEd00000FB8sv00001043sd000085F4bc04sc03i00"
Driver Info #0:
Driver Status: snd_hda_intel is active
Driver Activation Cmd: "modprobe snd_hda_intel"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #12 (PCI bridge)

# aplay /usr/share/sounds/alsa/Front_Center.wav
Playing WAVE '/usr/share/sounds/alsa/Front_Center.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
- but no sound

Speakers are connected into jack output.

Could anyone help please?

 

[TechnoJunky]

I'm going to assume that your desktop isn't routing the sound output to the correct device. I think the desktop settings can override the system settings sometimes. I know there's a file for everything in LInux, but I don't mess with the files too often and instead use the GUI (many years of supporting Windows). So what I'm going to say is based on my desktop of choice but should be similar for your desktop as well. In KDE, there's the sound volumn icon, I right click on it and choose Configure Audio Volume, which opens the audio configurations for everything within KDE. In the Advanced tab, I can choose what the output device is. Maybe doing this is what you need.