No internet on Anbox

Sudo It

Active Member
Joined
May 21, 2021
Messages
172
Reaction score
123
Credits
1,328
I installed Anbox on Raspberry pi 4, but it doesn't seem to connect to the internet. I saw this same problem on other forums too. Does someone have any idea? TIA

anbox version anbox danctnix-0_git20211020-r1

System Info
1647197177752.png

1647197193488.png
 


It looks like theirs the android figure on the web page? I have a solution I have laptop but im using a raspberry pi 3 curently it seams to be working for me check your router or WiFi/Ethernet.
 
adb shell ifconfig: * daemon not running; starting now at tcp:5037 * daemon started successfully lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope: Host UP LOOPBACK RUNNING MTU:65536 Metric:1 RX packets:12 errors:0 dropped:0 overruns:0 frame:0 TX packets:12 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:900 TX bytes:900 eth0 Link encap:Ethernet HWaddr ea:1e:73:a4:bb:80 inet addr:192.168.250.2 Bcast:192.168.250.255 Mask:255.255.255.0 inet6 addr: fe80::e81e:73ff:fea4:bb80/64 Scope: Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:89 errors:0 dropped:0 overruns:0 frame:0 TX packets:180 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:10978 TX bytes:13754



ifconfig: anbox0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.250.1 netmask 255.255.255.0 broadcast 0.0.0.0 inet6 fe80::e4c9:dbff:fe7e:396c prefixlen 64 scopeid 0x20<link> ether e6:c9:db:7e:39:6c txqueuelen 1000 (Ethernet) RX packets 180 bytes 11234 (10.9 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 84 bytes 11644 (11.3 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500 ether e4:5f:01:1b:ac:b2 txqueuelen 1000 (Ethernet) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536 inet 127.0.0.1 netmask 255.0.0.0 inet6 ::1 prefixlen 128 scopeid 0x10<host> loop txqueuelen 1000 (Local Loopback) RX packets 129 bytes 9854 (9.6 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 129 bytes 9854 (9.6 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 veth2hKkfT: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet6 fe80::fcc0:9aff:fe8a:e826 prefixlen 64 scopeid 0x20<link> ether fe:c0:9a:8a:e8:26 txqueuelen 1000 (Ethernet) RX packets 180 bytes 13754 (13.4 KiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 98 bytes 12720 (12.4 KiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500 inet 192.168.0.133 netmask 255.255.255.0 broadcast 192.168.0.255 inet6 fe80::b2c4:1c5e:de57:bc0 prefixlen 64 scopeid 0x20<link> ether e4:5f:01:1b:ac:b3 txqueuelen 1000 (Ethernet) RX packets 22597 bytes 20821506 (19.8 MiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 17324 bytes 3239243 (3.0 MiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
 
It looks like theirs the android figure on the web page? I have a solution I have laptop but im using a raspberry pi 3 curently it seams to be working for me check your router or WiFi/Ethernet.
already checked, but there's nothing wrong with my internet connection.
I installed anbox using AUR, not snaps
 
I checked the code it seams like you have 0MB upload and 0MBdecode dose it work on windows?
 
here is a solution maybe your fire wall blocked internet usage on anbox
 


Latest posts

Top