My Mint16 wont reconize my new CD/DVD

J

jbander

Guest
Now I've got my operating system to boot . The cd/dvd won't play music nor can I burn on it. I guess it is not recognising it , Any advice . When I boot the system the light on the cd/dvd blinks on and off foe a few second . MY burning program K3b say "No optical drive found."
K3b did not find any optical device in your system."
"My VLC media players is looking for it at /dev/cdrom ,It gives me this error message Your input can't be opened:
VLC is unable to open the MRL 'cdda:///dev/cdrom'. Check the log for details."
I must be missing something but I don't know what it is.
I changed the dvd/cd from pata to sata and I seem to have it plugged into where it is suppose to be . I have the Signal plug plugged into a blue plug in on my motherboard that is one of four it is in Sata3 . Over the top of these four plugs it says SATA RAID
Any Advice will be appreciated
 


This seems more like a Computer question, than a Linux question...

Do you just boot Linux or do you dual boot? If you dual boot what is reported in the other OS?

Does your motherboard have a MAKE and MODEL? Does it have written instructions for installing?
 
Could you paste the output of "dmesg" here for us to see? To do this, open a terminal/command-line and type "dmesg". Highlight and copy the output. Then, paste in on this thread so we can see what the kernel says about the optical drive.
 
sorry the forum won't let me, it says I have a link and I can't have a link until I have 9 uses of the forum or something.
 
You do not need to use a link. Copy the message with a clipboard application (right-click and "copy") and paste into your post.
 
Cyber thats what I did it won't go through for some reason
 
Heres the error message======
The following error occurred:
Sorry, you were not able to save since the content contained a link

For this Forum, before you can create content with links, you must first meet the minimum requirements

Minimum Requirements
The number of posts you have created must exceed: 9 (Yours: 4)
The number of Likes you've received must exceed: 0 (Yours: 0)
The Like:post Ratio must exceed: 0% (Yours: 0%)
The number of days you have been registered must exceed: 6 (Yours: 1)
 
Heres the error message======
The following error occurred:
Sorry, you were not able to save since the content contained a link

For this Forum, before you can create content with links, you must first meet the minimum requirements

Minimum Requirements
The number of posts you have created must exceed: 9 (Yours: 4)
The number of Likes you've received must exceed: 0 (Yours: 0)
The Like:post Ratio must exceed: 0% (Yours: 0%)
The number of days you have been registered must exceed: 6 (Yours: 1)

Okay, do it this way, click the "Code" button and paste into there. This button is with the bold and italic button (and others). The button looks like a paper with this written on it "<>".

Code:
This is code placed here using the code button.
 
. ------------ Nothing in here looks like url but here is the error message I get now The following error occurred:
A sneaky URL has been detected in your content. Please check your content and remove anything that might look like a URL
 
This is my email address if you could send me your and I can email back the information jbander at izoom dot net
 
I ran dmesg, copied the output with the terminal menu (copy), and pasted onto the board with code tags. This is the result.
Code:
[    0.000000] ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20110623/tbfadt-288)
[    0.000000] ACPI: DSDT 00000000cafeb000 10A8A (v01 LENOVO TP-H1    00001120 INTL 20061109)
[    0.000000] ACPI: FACS 00000000caf7a000 00040
[    0.000000] ACPI: SLIC 00000000caffd000 00176 (v01 LENOVO TP-H1    00001120 PTL  00000001)
[    0.000000] ACPI: SSDT 00000000caffc000 0052C (v01 LENOVO SataAhci 00001000 INTL 20061109)
[    0.000000] ACPI: HPET 00000000cafe7000 00038 (v01 LENOVO TP-H1    00001120 PTL  00000002)
[    0.000000] ACPI: APIC 00000000cafe6000 00098 (v01 LENOVO TP-H1    00001120 PTL  00000002)
[    0.000000] ACPI: MCFG 00000000cafe5000 0003C (v01 LENOVO TP-H1    00001120 PTL  00000002)
[    0.000000] ACPI: FPDT 00000000cafe4000 00064 (v01 LENOVO TP-H1    00001120 PTL  00000002)
[    0.000000] ACPI: ASF! 00000000cafea000 000A5 (v32 LENOVO TP-H1    00001120 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000cafe3000 009AA (v01  PmRef  Cpu0Ist 00003000 INTL 20061109)
[    0.000000] ACPI: SSDT 00000000cafe2000 00A92 (v01  PmRef    CpuPm 00003000 INTL 20061109)
[    0.000000] ACPI: UEFI 00000000cafe1000 0003E (v01 LENOVO TP-H1    00001120 PTL  00000002)
[    0.000000] ACPI: UEFI 00000000cafe0000 00042 (v01 PTL      COMBUF 00000001 PTL  00000001)
[    0.000000] ACPI: MSDM 00000000caf74000 00055 (v03 LENOVO TP-H1    00001120 PTL  00000002)
[    0.000000] ACPI: SSDT 00000000cafdf000 005B9 (v01 NvORef NvOptTbl 00001000 INTL 20061109)
[    0.000000] ACPI: UEFI 00000000cafde000 002A6 (v01 LENOVO TP-H1    00001120 PTL  00000002)
[    0.000000] ACPI: DBG2 00000000cafdd000 0002C (v00 LENOVO TP-H1    00001120 PTL  00000002)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000012e600000
[    0.000000] Initmem setup node 0 0000000000000000-000000012e600000
[    0.000000]  NODE_DATA [000000012e5fb000 - 000000012e5fffff]
[    0.000000]  [ffffea0000000000-ffffea00043fffff] PMD -> [ffff88012a200000-ffff88012d7fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]  DMA      0x00000010 -> 0x00001000
[    0.000000]  DMA32    0x00001000 -> 0x00100000
[    0.000000]  Normal  0x00100000 -> 0x0012e600
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]    0: 0x00000010 -> 0x0000009d
[    0.000000]    0: 0x00000100 -> 0x00020000
[    0.000000]    0: 0x00020200 -> 0x00040004
[    0.000000]    0: 0x00040005 -> 0x000b6507
[    0.000000]    0: 0x00100000 -> 0x0012e600
[    0.000000] On node 0 totalpages: 936083
[    0.000000]  DMA zone: 56 pages used for memmap
[    0.000000]  DMA zone: 5 pages reserved
[    0.000000]  DMA zone: 3920 pages, LIFO batch:0
[    0.000000]  DMA32 zone: 14280 pages used for memmap
[    0.000000]  DMA32 zone: 727870 pages, LIFO batch:31
[    0.000000]  Normal zone: 2597 pages used for memmap
[    0.000000]  Normal zone: 187355 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[    0.000000] PM: Registered nosave memory: 00000000b6507000 - 00000000cae9f000
[    0.000000] PM: Registered nosave memory: 00000000cae9f000 - 00000000caf9f000
[    0.000000] PM: Registered nosave memory: 00000000caf9f000 - 00000000cafff000
[    0.000000] PM: Registered nosave memory: 00000000cafff000 - 00000000cfa00000
[    0.000000] PM: Registered nosave memory: 00000000cfa00000 - 00000000f8000000
[    0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[    0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fe800000
[    0.000000] PM: Registered nosave memory: 00000000fe800000 - 00000000fe810000
[    0.000000] PM: Registered nosave memory: 00000000fe810000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed08000
[    0.000000] PM: Registered nosave memory: 00000000fed08000 - 00000000fed09000
[    0.000000] PM: Registered nosave memory: 00000000fed09000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffc20000
[    0.000000] PM: Registered nosave memory: 00000000ffc20000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at cfa00000 (gap: cfa00000:28600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012e200000 s82944 r8192 d23552 u262144
[    0.000000] pcpu-alloc: s82944 r8192 d23552 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 919145
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=8c39c72e-f85f-4eff-80b9-1e7675ce1ebf ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3603336k/4954112k available (3426k kernel code, 1209780k absent, 140996k reserved, 3312k data, 576k init)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] NR_IRQS:33024 nr_irqs:744 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2594.342 MHz processor.
[    0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5188.68 BogoMIPS (lpj=10377368)
[    0.000005] pid_max: default: 32768 minimum: 301
[    0.000034] Security Framework initialized
[    0.000038] AppArmor: AppArmor disabled by boot time parameter
[    0.000254] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001202] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001629] Mount-cache hash table entries: 256
[    0.001713] Initializing cgroup subsys cpuacct
[    0.001716] Initializing cgroup subsys memory
[    0.001724] Initializing cgroup subsys devices
[    0.001727] Initializing cgroup subsys freezer
[    0.001728] Initializing cgroup subsys net_cls
[    0.001730] Initializing cgroup subsys blkio
[    0.001734] Initializing cgroup subsys perf_event
[    0.001759] CPU: Physical Processor ID: 0
[    0.001760] CPU: Processor Core ID: 0
[    0.001765] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.001765] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.002108] mce: CPU supports 7 MCE banks
[    0.002119] CPU0: Thermal monitoring enabled (TM1)
[    0.002125] using mwait in idle threads.
[    0.002509] ACPI: Core revision 20110623
[    0.009917] x2apic not enabled, IRQ remapping init failed
[    0.010337] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.049950] CPU0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz stepping 09
[    0.155660] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[    0.155666] ... version:                3
[    0.155667] ... bit width:              48
[    0.155668] ... generic registers:      4
[    0.155670] ... value mask:            0000ffffffffffff
[    0.155671] ... max period:            000000007fffffff
[    0.155672] ... fixed-purpose events:  3
[    0.155673] ... event mask:            000000070000000f
[    0.155808] NMI watchdog enabled, takes one hw-pmu counter.
[    0.155890] Booting Node  0, Processors  #1
[    0.155891] smpboot cpu 1: start_ip = 98000
[    0.263926] NMI watchdog enabled, takes one hw-pmu counter.
[    0.264012]  #2
[    0.264013] smpboot cpu 2: start_ip = 98000
[    0.371678] NMI watchdog enabled, takes one hw-pmu counter.
[    0.371760]  #3
[    0.371761] smpboot cpu 3: start_ip = 98000
[    0.479523] NMI watchdog enabled, takes one hw-pmu counter.
[    0.479545] Brought up 4 CPUs
[    0.479546] Total of 4 processors activated (20752.58 BogoMIPS).
[    0.482632] devtmpfs: initialized
[    0.485112] PM: Registering ACPI NVS region at cae9f000 (1048576 bytes)
[    0.485244] print_constraints: dummy:
[    0.485291] NET: Registered protocol family 16
[    0.485357] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.485359] ACPI: bus type pci registered
[    0.485418] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.485421] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.490210] PCI: Using configuration type 1 for base access
[    0.490781] bio: create slab <bio-0> at 0
[    0.490855] ACPI: Added _OSI(Module Device)
[    0.490856] ACPI: Added _OSI(Processor Device)
[    0.490858] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.490859] ACPI: Added _OSI(Processor Aggregator Device)
[    0.492326] ACPI: EC: Look up EC in DSDT
[    0.492448] ACPI Error: No handler for Region [ECOR] (ffff880129a724f8) [EmbeddedControl] (20110623/evregion-373)
[    0.492452] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110623/exfldio-292)
[    0.492455] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.H_EC._REG] (Node ffff880129a77c18), AE_NOT_EXIST (20110623/psparse-536)
[    0.493491] ACPI: Executed 1 blocks of module-level executable AML code
[    0.519070] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.519658] ACPI: SSDT 00000000cae3e018 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.520032] ACPI: Dynamic OEM Table Load:
[    0.520034] ACPI: SSDT          (null) 0083B (v01  PmRef  Cpu0Cst 00003001 INTL 20061109)
[    0.531197] ACPI: SSDT 00000000cae3fa98 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.531601] ACPI: Dynamic OEM Table Load:
[    0.531603] ACPI: SSDT          (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20061109)
[    0.543042] ACPI: SSDT 00000000cae3dd98 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.543409] ACPI: Dynamic OEM Table Load:
[    0.543411] ACPI: SSDT          (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20061109)
[    0.967759] ACPI: Interpreter enabled
[    0.967763] ACPI: (supports S0 S3 S4 S5)
[    0.967789] ACPI: Using IOAPIC for interrupt routing
[    0.978804] ACPI: Power Resource [PUBS] (off)
[    0.996157] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[    0.996314] ACPI: No dock devices found.
[    0.996316] HEST: Table not found.
[    0.996318] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.996629] \_SB_.PCI0:_OSC invalid UUID
[    0.996630] _OSC request data:1 8 0
[    0.996633] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.997148] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.997150] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.997152] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.997154] pci_root PNP0A08:00: host bridge window [mem 0xcfa00000-0xfeafffff]
[    0.997164] pci 0000:00:00.0: [8086:0154] type 0 class 0x000600
[    0.997196] pci 0000:00:01.0: [8086:0151] type 1 class 0x000604
[    0.997224] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.997243] pci 0000:00:02.0: [8086:0166] type 0 class 0x000300
[    0.997252] pci 0000:00:02.0: reg 10: [mem 0xf3000000-0xf33fffff 64bit]
[    0.997258] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.997263] pci 0000:00:02.0: reg 20: [io  0x4000-0x403f]
[    0.997313] pci 0000:00:14.0: [8086:1e31] type 0 class 0x000c03
[    0.997335] pci 0000:00:14.0: reg 10: [mem 0xf3600000-0xf360ffff 64bit]
[    0.997407] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.997431] pci 0000:00:16.0: [8086:1e3a] type 0 class 0x000780
[    0.997454] pci 0000:00:16.0: reg 10: [mem 0xf3615000-0xf361500f 64bit]
[    0.997530] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.997564] pci 0000:00:1a.0: [8086:1e2d] type 0 class 0x000c03
[    0.997585] pci 0000:00:1a.0: reg 10: [mem 0xf361a000-0xf361a3ff]
[    0.997675] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.997703] pci 0000:00:1b.0: [8086:1e20] type 0 class 0x000403
[    0.997717] pci 0000:00:1b.0: reg 10: [mem 0xf3610000-0xf3613fff 64bit]
[    0.997787] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.997811] pci 0000:00:1c.0: [8086:1e10] type 1 class 0x000604
[    0.997892] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.997917] pci 0000:00:1c.1: [8086:1e12] type 1 class 0x000604
[    0.997997] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.998024] pci 0000:00:1c.3: [8086:1e16] type 1 class 0x000604
[    0.998104] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.998138] pci 0000:00:1d.0: [8086:1e26] type 0 class 0x000c03
[    0.998159] pci 0000:00:1d.0: reg 10: [mem 0xf3619000-0xf36193ff]
[    0.998248] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.998275] pci 0000:00:1f.0: [8086:1e57] type 0 class 0x000601
[    0.998402] pci 0000:00:1f.2: [8086:1e03] type 0 class 0x000106
[    0.998420] pci 0000:00:1f.2: reg 10: [io  0x4088-0x408f]
[    0.998428] pci 0000:00:1f.2: reg 14: [io  0x4094-0x4097]
[    0.998436] pci 0000:00:1f.2: reg 18: [io  0x4080-0x4087]
[    0.998444] pci 0000:00:1f.2: reg 1c: [io  0x4090-0x4093]
[    0.998452] pci 0000:00:1f.2: reg 20: [io  0x4060-0x407f]
[    0.998461] pci 0000:00:1f.2: reg 24: [mem 0xf3618000-0xf36187ff]
[    0.998509] pci 0000:00:1f.2: PME# supported from D3hot
[    0.998530] pci 0000:00:1f.3: [8086:1e22] type 0 class 0x000c05
[    0.998546] pci 0000:00:1f.3: reg 10: [mem 0xf3614000-0xf36140ff 64bit]
[    0.998567] pci 0000:00:1f.3: reg 20: [io  0xefa0-0xefbf]
[    0.998618] pci 0000:01:00.0: [10de:0fd9] type 0 class 0x000300
[    0.998625] pci 0000:01:00.0: reg 10: [mem 0xf2000000-0xf2ffffff]
[    0.998632] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.998639] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[    0.998644] pci 0000:01:00.0: reg 24: [io  0x3000-0x307f]
[    0.998648] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[    1.006496] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.006501] pci 0000:00:01.0:  bridge window [io  0x3000-0x3fff]
[    1.006506] pci 0000:00:01.0:  bridge window [mem 0xf2000000-0xf2ffffff]
[    1.006512] pci 0000:00:01.0:  bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.006572] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.006696] pci 0000:03:00.0: [8086:0888] type 0 class 0x000280
[    1.006742] pci 0000:03:00.0: reg 10: [mem 0xf3500000-0xf3501fff 64bit]
[    1.006970] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    1.014550] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.014556] pci 0000:00:1c.1:  bridge window [mem 0xf3500000-0xf35fffff]
[    1.014628] pci 0000:04:00.0: [10ec:8168] type 0 class 0x000200
[    1.014648] pci 0000:04:00.0: reg 10: [io  0x2000-0x20ff]
[    1.014682] pci 0000:04:00.0: reg 18: [mem 0xf3404000-0xf3404fff 64bit pref]
[    1.014704] pci 0000:04:00.0: reg 20: [mem 0xf3400000-0xf3403fff 64bit pref]
[    1.014795] pci 0000:04:00.0: supports D1 D2
[    1.014796] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    1.022473] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    1.022481] pci 0000:00:1c.3:  bridge window [io  0x2000-0x2fff]
[    1.022504] pci 0000:00:1c.3:  bridge window [mem 0xf3400000-0xf34fffff 64bit pref]
[    1.022524] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    1.022653] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    1.022687] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    1.022721] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    1.022765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    1.022850] \_SB_.PCI0:_OSC invalid UUID
[    1.022851] _OSC request data:1 1f 0
[    1.022854]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    1.022895] \_SB_.PCI0:_OSC invalid UUID
[    1.022896] _OSC request data:1 0 1d
[    1.022899]  pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[    1.022900] ACPI _OSC control for PCIe not granted, disabling ASPM
[    1.025901] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.025943] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[    1.025986] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    1.026028] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    1.026067] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.026109] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[    1.026150] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[    1.026189] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[    1.026268] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.026275] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    1.026277] vgaarb: loaded
[    1.026278] vgaarb: bridge control possible 0000:01:00.0
[    1.026279] vgaarb: no bridge control possible 0000:00:02.0
[    1.026310] PCI: Using ACPI for IRQ routing
[    1.027835] PCI: pci_cache_line_size set to 64 bytes
[    1.027952] reserve RAM buffer: 000000000009d000 - 000000000009ffff
[    1.027954] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
[    1.027956] reserve RAM buffer: 00000000b6507000 - 00000000b7ffffff
[    1.027957] reserve RAM buffer: 000000012e600000 - 000000012fffffff
[    1.028043] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.028048] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.030057] Switching to clocksource hpet
[    1.031436] pnp: PnP ACPI init
[    1.031446] ACPI: bus type pnp registered
[    1.031710] pnp 00:00: [bus 00-3e]
[    1.031712] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.031714] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.031715] pnp 00:00: [io  0x0d00-0xffff window]
[    1.031717] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.031719] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.031720] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.031722] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.031724] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.031725] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.031727] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.031728] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.031730] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.031731] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.031733] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.031734] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.031736] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.031737] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.031739] pnp 00:00: [mem 0xcfa00000-0xfeafffff window]
[    1.031783] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.031841] pnp 00:01: [io  0x06a4]
[    1.031842] pnp 00:01: [io  0x06a0]
[    1.031874] system 00:01: [io  0x06a4] has been reserved
[    1.031876] system 00:01: [io  0x06a0] has been reserved
[    1.031878] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.031885] pnp 00:02: [io  0x0000-0x001f]
[    1.031887] pnp 00:02: [io  0x0081-0x0091]
[    1.031888] pnp 00:02: [io  0x0093-0x009f]
[    1.031889] pnp 00:02: [io  0x00c0-0x00df]
[    1.031891] pnp 00:02: [dma 4]
[    1.031910] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.031917] pnp 00:03: [mem 0xff000000-0xffffffff]
[    1.031935] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[    1.032005] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[    1.032024] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.032032] pnp 00:05: [io  0x00f0]
[    1.032038] pnp 00:05: [irq 13]
[    1.032058] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.032066] pnp 00:06: [io  0x002e-0x002f]
[    1.032067] pnp 00:06: [io  0x004e-0x004f]
[    1.032069] pnp 00:06: [io  0x0061]
[    1.032070] pnp 00:06: [io  0x0063]
[    1.032071] pnp 00:06: [io  0x0065]
[    1.032073] pnp 00:06: [io  0x0067]
[    1.032074] pnp 00:06: [io  0x0070]
[    1.032075] pnp 00:06: [io  0x0080]
[    1.032076] pnp 00:06: [io  0x0092]
[    1.032078] pnp 00:06: [io  0x00b2-0x00b3]
[    1.032079] pnp 00:06: [io  0x0680-0x069f]
[    1.032080] pnp 00:06: [io  0x1000-0x100f]
[    1.032082] pnp 00:06: [io  0xffff]
[    1.032083] pnp 00:06: [io  0xffff]
[    1.032084] pnp 00:06: [io  0x0400-0x0453]
[    1.032085] pnp 00:06: [io  0x0458-0x047f]
[    1.032086] pnp 00:06: [io  0x0500-0x057f]
[    1.032088] pnp 00:06: [io  0x164e-0x164f]
[    1.032089] pnp 00:06: [io  0x0068-0x006f]
[    1.032090] pnp 00:06: [mem 0xfe800000-0xfe80ffff]
[    1.032128] system 00:06: [io  0x0680-0x069f] has been reserved
[    1.032131] system 00:06: [io  0x1000-0x100f] has been reserved
[    1.032134] system 00:06: [io  0xffff] has been reserved
[    1.032136] system 00:06: [io  0xffff] has been reserved
[    1.032137] system 00:06: [io  0x0400-0x0453] has been reserved
[    1.032139] system 00:06: [io  0x0458-0x047f] has been reserved
[    1.032141] system 00:06: [io  0x0500-0x057f] has been reserved
[    1.032143] system 00:06: [io  0x164e-0x164f] has been reserved
[    1.032145] system 00:06: [mem 0xfe800000-0xfe80ffff] has been reserved
[    1.032147] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.032154] pnp 00:07: [io  0x0070-0x0077]
[    1.032158] pnp 00:07: [irq 8]
[    1.032179] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.032200] pnp 00:08: [io  0x0454-0x0457]
[    1.032229] system 00:08: [io  0x0454-0x0457] has been reserved
[    1.032232] system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.032238] pnp 00:09: [io  0x0060]
[    1.032239] pnp 00:09: [io  0x0064]
[    1.032244] pnp 00:09: [irq 1]
[    1.032263] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.032272] pnp 00:0a: [irq 12]
[    1.032292] pnp 00:0a: Plug and Play ACPI device, IDs SYN0332 PNP0f13 (active)
[    1.032382] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[    1.032383] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[    1.032385] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[    1.032386] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[    1.032388] pnp 00:0b: [mem 0xf8000000-0xfbffffff]
[    1.032389] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[    1.032390] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[    1.032392] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[    1.032394] pnp 00:0b: [mem 0xff000000-0xffffffff]
[    1.032395] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[    1.032397] pnp 00:0b: [mem 0xfffff000-0xffffffff]
[    1.032409] pnp 00:0b: disabling [mem 0xfffff000-0xffffffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfff80000-0xffffffff pref]
[    1.032434] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.032436] system 00:0b: [mem 0xfed10000-0xfed17fff] has been reserved
[    1.032439] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.032440] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.032442] system 00:0b: [mem 0xf8000000-0xfbffffff] has been reserved
[    1.032444] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.032446] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.032448] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.032450] system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved
[    1.032452] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.032454] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.032664] pnp: PnP ACPI: found 12 devices
[    1.032665] ACPI: ACPI bus type pnp unregistered
[    1.038906] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[    1.038910] PCI: max bus depth: 1 pci_try_num: 2
[    1.038940] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
[    1.038942] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.038944] pci 0000:00:01.0:  bridge window [io  0x3000-0x3fff]
[    1.038946] pci 0000:00:01.0:  bridge window [mem 0xf2000000-0xf2ffffff]
[    1.038949] pci 0000:00:01.0:  bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.038952] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.038963] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.038969] pci 0000:00:1c.1:  bridge window [mem 0xf3500000-0xf35fffff]
[    1.038977] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    1.038980] pci 0000:00:1c.3:  bridge window [io  0x2000-0x2fff]
[    1.038988] pci 0000:00:1c.3:  bridge window [mem 0xf3400000-0xf34fffff 64bit pref]
[    1.039002] pci 0000:00:01.0: setting latency timer to 64
[    1.039011] pci 0000:00:1c.0: setting latency timer to 64
[    1.039022] pci 0000:00:1c.1: setting latency timer to 64
[    1.039033] pci 0000:00:1c.3: setting latency timer to 64
[    1.039036] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.039037] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.039039] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.039041] pci_bus 0000:00: resource 7 [mem 0xcfa00000-0xfeafffff]
[    1.039042] pci_bus 0000:01: resource 0 [io  0x3000-0x3fff]
[    1.039044] pci_bus 0000:01: resource 1 [mem 0xf2000000-0xf2ffffff]
[    1.039045] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[    1.039047] pci_bus 0000:03: resource 1 [mem 0xf3500000-0xf35fffff]
[    1.039049] pci_bus 0000:04: resource 0 [io  0x2000-0x2fff]
[    1.039050] pci_bus 0000:04: resource 2 [mem 0xf3400000-0xf34fffff 64bit pref]
[    1.039114] NET: Registered protocol family 2
[    1.039220] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.039858] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.041305] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.041489] TCP: Hash tables configured (established 524288 bind 65536)
[    1.041491] TCP reno registered
[    1.041500] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.041518] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.041624] NET: Registered protocol family 1
[    1.041637] pci 0000:00:02.0: Boot video device
[    1.041809] PCI: CLS 64 bytes, default 64
[    1.041843] Unpacking initramfs...
[    1.221348] Freeing initrd memory: 10220k freed
[    1.222456] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.222459] Placing 64MB software IO TLB between ffff8800b2505000 - ffff8800b6505000
[    1.222461] software IO TLB at phys 0xb2505000 - 0xb6505000
[    1.222905] audit: initializing netlink socket (disabled)
[    1.222913] type=2000 audit(1387528241.068:1): initialized
[    1.236263] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    1.236735] VFS: Disk quotas dquot_6.5.2
[    1.236761] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.236815] msgmni has been set to 7057
[    1.236956] alg: No test for stdrng (krng)
[    1.236984] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    1.236987] io scheduler noop registered
[    1.236988] io scheduler deadline registered
[    1.237008] io scheduler cfq registered (default)
[    1.237068] pcieport 0000:00:01.0: setting latency timer to 64
[    1.237090] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    1.237264] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.237280] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    1.237281] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    1.237563] intel_idle: MWAIT substates: 0x21120
[    1.237564] intel_idle: v0.4 model 0x3A
[    1.237565] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.237596] ERST: Table is not found!
[    1.237597] GHES: HEST is not enabled!
[    1.237643] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.425668] Linux agpgart interface v0.103
[    1.425733] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[    1.425793] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    1.426600] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    1.426699] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    1.426793] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.430065] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.430071] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.430167] mousedev: PS/2 mouse device common for all mice
[    1.430195] rtc_cmos 00:07: RTC can wake from S4
[    1.430300] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[    1.430329] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.430400] cpuidle: using governor ladder
[    1.430480] cpuidle: using governor menu
[    1.430612] TCP cubic registered
[    1.430724] NET: Registered protocol family 10
[    1.431101] Mobile IPv6
[    1.431103] NET: Registered protocol family 17
[    1.431106] Registering the dns_resolver key type
[    1.431295] PM: Hibernation image not present or could not be loaded.
[    1.431304] registered taskstats version 1
[    1.431752] rtc_cmos 00:07: setting system clock to 2013-12-20 08:30:42 UTC (1387528242)
[    1.431804] Initializing network drop monitor service
[    1.432634] Freeing unused kernel memory: 576k freed
[    1.432685] Write protecting the kernel read-only data: 6144k
[    1.434481] Freeing unused kernel memory: 652k freed
[    1.436318] Freeing unused kernel memory: 688k freed
[    1.444986] udevd[59]: starting version 175
[    1.452023] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    1.460837] usbcore: registered new interface driver usbfs
[    1.460866] usbcore: registered new interface driver hub
[    1.470058] SCSI subsystem initialized
[    1.475433] usbcore: registered new device driver usb
[    1.476017] xhci_hcd 0000:00:14.0: setting latency timer to 64
[    1.476022] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.476044] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.476141] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.476190] xhci_hcd 0000:00:14.0: irq 41 for MSI/MSI-X
[    1.476250] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.476253] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.476255] usb usb1: Product: xHCI Host Controller
[    1.476257] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    1.476259] usb usb1: SerialNumber: 0000:00:14.0
[    1.477082] xHCI xhci_add_endpoint called for root hub
[    1.477085] xHCI xhci_check_bandwidth called for root hub
[    1.477122] hub 1-0:1.0: USB hub found
[    1.477134] hub 1-0:1.0: 4 ports detected
[    1.477229] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.477239] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.477262] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.477265] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.477267] usb usb2: Product: xHCI Host Controller
[    1.477269] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[    1.477271] usb usb2: SerialNumber: 0000:00:14.0
[    1.478450] xHCI xhci_add_endpoint called for root hub
[    1.478453] xHCI xhci_check_bandwidth called for root hub
[    1.478492] hub 2-0:1.0: USB hub found
[    1.478501] hub 2-0:1.0: 4 ports detected
[    1.479547] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.480037] libata version 3.00 loaded.
[    1.484019] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.484082] r8169 0000:04:00.0: setting latency timer to 64
[    1.484173] r8169 0000:04:00.0: irq 42 for MSI/MSI-X
[    1.484597] r8169 0000:04:00.0: eth0: RTL8168evl/8111evl at 0xffffc90000616000, 3c:97:0e:89:d0:50, XID 0c900800 IRQ 42
[    1.484601] r8169 0000:04:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.485663] ACPI Error: No handler for Region [ECRM] (ffff8801295c3540) [EmbeddedControl] (20110623/evregion-373)
[    1.485672] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20110623/exfldio-292)
[    1.485678] ACPI Error: Method parse/execution failed [\_TZ_.MDEC] (Node ffff880129a7db00), AE_NOT_EXIST (20110623/psparse-536)
[    1.485890] ACPI Error: Method parse/execution failed [\_TZ_.TZS0._SCP] (Node ffff880129a7fa60), AE_NOT_EXIST (20110623/psparse-536)
[    1.486035] thermal LNXTHERM:00: registered as thermal_zone0
[    1.486038] ACPI: Thermal Zone [TZS0] (27 C)
[    1.486206] thermal LNXTHERM:01: registered as thermal_zone1
[    1.486208] ACPI: Thermal Zone [TZS1] (30 C)
[    1.493346] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    1.493352] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    1.493364] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    1.493395] ehci_hcd 0000:00:1a.0: debug port 2
[    1.497264] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    1.497288] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf361a000
[    1.513143] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.513193] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.513196] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.513198] usb usb3: Product: EHCI Host Controller
[    1.513200] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.513202] usb usb3: SerialNumber: 0000:00:1a.0
[    1.513392] hub 3-0:1.0: USB hub found
[    1.513397] hub 3-0:1.0: 3 ports detected
[    1.513499] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    1.513503] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    1.513509] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    1.513532] ehci_hcd 0000:00:1d.0: debug port 2
[    1.517426] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    1.517441] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf3619000
[    1.533120] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.533144] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[    1.533146] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.533148] usb usb4: Product: EHCI Host Controller
[    1.533149] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[    1.533151] usb usb4: SerialNumber: 0000:00:1d.0
[    1.533324] hub 4-0:1.0: USB hub found
[    1.533328] hub 4-0:1.0: 3 ports detected
[    1.533388] ahci 0000:00:1f.2: version 3.0
[    1.533453] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[    1.549106] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x12 impl SATA mode
[    1.549110] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[    1.549115] ahci 0000:00:1f.2: setting latency timer to 64
[    1.557464] scsi0 : ahci
[    1.557568] scsi1 : ahci
[    1.557648] scsi2 : ahci
[    1.557716] scsi3 : ahci
[    1.557788] scsi4 : ahci
[    1.557848] scsi5 : ahci
[    1.558112] ata1: DUMMY
[    1.558116] ata2: SATA max UDMA/133 abar m2048@0xf3618000 port 0xf3618180 irq 43
[    1.558117] ata3: DUMMY
[    1.558118] ata4: DUMMY
[    1.558121] ata5: SATA max UDMA/133 abar m2048@0xf3618000 port 0xf3618300 irq 43
[    1.558122] ata6: DUMMY
[    1.784646] usb 1-2: new low-speed USB device number 2 using xhci_hcd
[    1.803917] usb 1-2: New USB device found, idVendor=2188, idProduct=0ae1
[    1.803935] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    1.803937] usb 1-2: Product:  USB OPTICAL MOUSE
[    1.804014] usb 1-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    1.876483] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.876505] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.879197] ata5.00: ATAPI: HL-DT-ST DVDRAM GT80N, LN80, max UDMA/33
[    1.881427] ata5.00: configured for UDMA/33
[    1.884615] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.884619] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.884621] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.891075] ata2.00: failed to enable AA (error_mask=0x1)
[    1.891130] ata2.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/100
[    1.891132] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    1.897544] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    1.897562] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    1.897565] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    1.903999] ata2.00: failed to enable AA (error_mask=0x1)
[    1.904053] ata2.00: configured for UDMA/100
[    1.904220] scsi 1:0:0:0: Direct-Access    ATA      ST1000LM024 HN-M 2AR1 PQ: 0 ANSI: 5
[    1.907579] scsi 4:0:0:0: CD-ROM            HL-DT-ST DVDRAM GT80N    LN80 PQ: 0 ANSI: 5
[    1.910016] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/input/input1
[    1.910100] generic-usb 0003:2188:0AE1.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-2/input0
[    1.910118] usbcore: registered new interface driver usbhid
[    1.910120] usbhid: USB HID core driver
[    1.911614] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[    1.911617] sd 1:0:0:0: [sda] 4096-byte physical blocks
[    1.911668] sd 1:0:0:0: [sda] Write Protect is off
[    1.911671] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.911690] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.912420] usb 3-1: new high-speed USB device number 2 using ehci_hcd
[    1.914656] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    1.914672] cdrom: Uniform CD-ROM driver Revision: 3.20
[    1.914812] sr 4:0:0:0: Attached scsi CD-ROM sr0
[    1.961199]  sda: sda1 sda2 < sda5 sda6 > sda3
[    1.962139] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.963617] sd 1:0:0:0: Attached scsi generic sg0 type 0
[    1.963695] sr 4:0:0:0: Attached scsi generic sg1 type 5
[    2.044553] usb 3-1: New USB device found, idVendor=8087, idProduct=0024
[    2.044556] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.044851] hub 3-1:1.0: USB hub found
[    2.044925] hub 3-1:1.0: 6 ports detected
[    2.155954] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[    2.219793] Refined TSC clocksource calibration: 2594.106 MHz.
[    2.219801] Switching to clocksource tsc
[    2.288091] usb 4-1: New USB device found, idVendor=8087, idProduct=0024
[    2.288097] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.288376] hub 4-1:1.0: USB hub found
[    2.288461] hub 4-1:1.0: 8 ports detected
[    2.359586] usb 3-1.3: new full-speed USB device number 3 using ehci_hcd
[    2.452528] usb 3-1.3: New USB device found, idVendor=147e, idProduct=1002
[    2.452534] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.452537] usb 3-1.3: Product: TouchStrip Fingerprint Sensor   
[    2.452540] usb 3-1.3: Manufacturer: UPEK
[    2.523440] usb 3-1.4: new full-speed USB device number 4 using ehci_hcd
[    2.619396] usb 3-1.4: New USB device found, idVendor=8087, idProduct=07da
[    2.619399] usb 3-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.691135] usb 3-1.5: new high-speed USB device number 5 using ehci_hcd
[    2.794299] usb 3-1.5: New USB device found, idVendor=5986, idProduct=0295
[    2.794317] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.794319] usb 3-1.5: Product: Integrated Camera
[    2.794320] usb 3-1.5: Manufacturer: Vimicro corp.
[    2.866789] usb 4-1.6: new high-speed USB device number 3 using ehci_hcd
[    2.960752] usb 4-1.6: New USB device found, idVendor=058f, idProduct=6366
[    2.960755] usb 4-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.960757] usb 4-1.6: Product: Flash Card Reader/Writer
[    2.960758] usb 4-1.6: Manufacturer: Generic
[    2.960759] usb 4-1.6: SerialNumber: 058F63666435
[    2.962752] Initializing USB Mass Storage driver...
[    2.962840] scsi6 : usb-storage 4-1.6:1.0
[    2.962904] usbcore: registered new interface driver usb-storage
[    2.962905] USB Mass Storage support registered.
[    3.093392] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[    3.961551] scsi 6:0:0:0: Direct-Access    Multiple Card  Reader    1.00 PQ: 0 ANSI: 0
[    3.962058] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    3.963309] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[    5.156817] udevd[394]: starting version 175
[    6.299565] wmi: Mapper loaded
[    6.491873] ACPI: AC Adapter [ADP1] (on-line)
[    6.492018] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[    6.492248] ACPI: Lid Switch [LID0]
[    6.492309] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[    6.492351] ACPI: Sleep Button [SLPB]
[    6.492405] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    6.492443] ACPI: Power Button [PWRF]
[    6.549009] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    6.697293] ACPI: Requesting acpi_cpufreq
[    6.707557] ACPI: Battery Slot [BAT0] (battery present)
[    6.834370] ACPI: resource 0000:00:1f.3 [io  0xefa0-0xefbf] conflicts with ACPI region SMBI [io 0xefa0-0xefaf]
[    6.834376] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    6.896227] [drm] Initialized drm 1.1.0 20060810
[    6.904115] iTCO_vendor_support: vendor-support=0
[    6.904595] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[    6.904671] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    6.904732] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    7.225933] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x126c00
[    7.259832] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input6
[    7.384291] cfg80211: Calling CRDA to update world regulatory domain
[    7.436934] i915 0000:00:02.0: setting latency timer to 64
[    7.479234] mtrr: no more MTRRs available
[    7.479236] [drm] MTRR allocation failed.  Graphics performance may suffer.
[    7.479373] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[    7.479377] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    7.479378] [drm] Driver supports precise vblank timestamp query.
[    7.479435] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[    7.480008] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    7.480010] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[    7.622312] Bluetooth: Core ver 2.16
[    7.622326] NET: Registered protocol family 31
[    7.622328] Bluetooth: HCI device and connection manager initialized
[    7.622330] Bluetooth: HCI socket layer initialized
[    7.622332] Bluetooth: L2CAP socket layer initialized
[    7.622336] Bluetooth: SCO socket layer initialized
[    7.844087] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[    8.009871] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    8.010036] usbcore: registered new interface driver btusb
[    8.012230] Non-volatile memory driver v1.3
[    8.066987] fbcon: inteldrmfb (fb0) is primary device
[    8.249076] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
[    8.249078] Copyright(c) 2003-2011 Intel Corporation
[    8.249145] iwlwifi 0000:03:00.0: setting latency timer to 64
[    8.249162] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[    8.249163] iwlwifi 0000:03:00.0: pci_resource_base = ffffc90005084000
[    8.249165] iwlwifi 0000:03:00.0: HW Revision ID = 0xC4
[    8.249280] iwlwifi 0000:03:00.0: irq 45 for MSI/MSI-X
[    8.249328] iwlwifi 0000:03:00.0: Detected 2000 Series 2x2 BGN/BT, REV=0xC8
[    8.249424] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[    8.251617] Console: switching to colour frame buffer device 170x48
[    8.254757] fb0: inteldrmfb frame buffer device
[    8.254758] drm: registered panic notifier
[    8.254960] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20110623/video-1193)
[    8.255005] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:3f/LNXVIDEO:00/input/input7
[    8.255045] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    8.265926] iwlwifi 0000:03:00.0: device EEPROM VER=0x81c, CALIB=0x6
[    8.265930] iwlwifi 0000:03:00.0: Device SKU: 0X150
[    8.265932] iwlwifi 0000:03:00.0: Valid Tx ant: 0X3, Valid Rx ant: 0X3
[    8.265965] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[    8.289085] thinkpad_acpi: ThinkPad ACPI Extras v0.24
[    8.289095] thinkpad_acpi: http://ibm-acpi.sf.net/
[    8.289097] thinkpad_acpi: ThinkPad BIOS H1ET69WW (1.12 ), EC unknown
[    8.289098] thinkpad_acpi: Lenovo LENOVO, model 20143
[    8.309451] acpi device:45: registered as cooling_device4
[    8.310206] thinkpad_acpi: detected a 8-level brightness capable ThinkPad
[    8.310247] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input8
[    8.310557] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.310607] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[    8.313452] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    8.314013] Registered led device: tpacpi::thinklight
[    8.314054] Registered led device: tpacpi::power
[    8.314085] Registered led device: tpacpi::standby
[    8.314108] Registered led device: tpacpi::thinkvantage
[    8.314117] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    8.314279] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    8.315655] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input9
[    8.667202] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[    8.667228] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[    8.714321] Linux media interface: v0.10
[    8.759299] nvidia: module license 'NVIDIA' taints kernel.
[    8.759312] Disabling lock debugging due to kernel taint
[    8.844176] nvidia 0000:01:00.0: power state changed by ACPI to D0
[    8.844184] nvidia 0000:01:00.0: power state changed by ACPI to D0
[    8.844190] nvidia 0000:01:00.0: enabling device (0006 -> 0007)
[    8.844207] nvidia 0000:01:00.0: setting latency timer to 64
[    8.844215] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[    8.844383] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  304.88  Wed Mar 27 14:26:46 PDT 2013
[    8.862609] iwlwifi 0000:03:00.0: firmware: agent loaded iwlwifi-2030-6.ucode into memory
[    8.862614] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1
[    8.862886] Registered led device: phy0-led
[    8.991641] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    9.068422] Linux video capture interface: v2.00
[    9.127380] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0295)
[    9.128955] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.5/3-1.5:1.0/input/input10
[    9.129107] usbcore: registered new interface driver uvcvideo
[    9.129111] USB Video Class driver (1.1.1)
[    9.765170] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11
[    9.832065] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[    9.832242] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[    9.832498] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[    9.832593] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[  10.642298] cfg80211: World regulatory domain updated:
[  10.642303] cfg80211:    (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[  10.642306] cfg80211:    (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  10.642309] cfg80211:    (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  10.642311] cfg80211:    (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[  10.642314] cfg80211:    (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  10.642316] cfg80211:    (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[  12.380548] Adding 7487480k swap on /dev/sda5.  Priority:-1 extents:1 across:7487480k
[  12.394124] EXT4-fs (sda1): re-mounted. Opts: (null)
[  12.715136] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[  12.951040] loop: module loaded
[  13.752566] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[  15.199452] RPC: Registered named UNIX socket transport module.
[  15.199458] RPC: Registered udp transport module.
[  15.199460] RPC: Registered tcp transport module.
[  15.199463] RPC: Registered tcp NFSv4.1 backchannel transport module.
[  15.233061] FS-Cache: Loaded
[  15.280549] FS-Cache: Netfs 'nfs' registered for caching
[  15.291596] Installing knfsd (copyright (C) 1996 [email protected]).
[  17.901704] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input15
[  20.909094] Bluetooth: RFCOMM TTY layer initialized
[  20.909099] Bluetooth: RFCOMM socket layer initialized
[  20.909100] Bluetooth: RFCOMM ver 1.11
[  22.192791] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  22.192795] Bluetooth: BNEP filters: protocol multicast
[  22.872661] lp: driver loaded but no devices found
[  23.239212] ppdev: user-space parallel port driver
[  31.819481] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[  31.826955] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[  32.087818] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[  32.095323] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[  32.184136] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  37.148614] r8169 0000:04:00.0: firmware: agent aborted loading rtl_nic/rtl8168e-3.fw (not found?)
[  37.148655] r8169 0000:04:00.0: eth0: unable to load firmware patch rtl_nic/rtl8168e-3.fw (-2)
[  37.159098] r8169 0000:04:00.0: eth0: link down
[  37.159378] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  60.175579] python[3581]: segfault at 40 ip 00007f9142b45594 sp 00007fffc45b80f8 error 4 in libQtCore.so.4.8.2[7f91429b7000+2c8000]
[  64.327393] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[  64.334877] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[  64.429272] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  64.699260] r8169 0000:04:00.0: eth0: link down
[  64.699949] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  65.034173] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[  65.041665] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[  65.137743] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  136.934007] r8169 0000:04:00.0: eth0: link up
[  136.934682] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  137.977306] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[  137.984799] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[  138.080022] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  138.336785] r8169 0000:04:00.0: eth0: link down
[  138.336796] r8169 0000:04:00.0: eth0: link down
[  138.337467] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  139.881161] r8169 0000:04:00.0: eth0: link up
[  139.881702] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  150.277361] eth0: no IPv6 routers present
[  152.892712] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[  152.900229] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[  152.996488] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  153.288684] r8169 0000:04:00.0: eth0: link down
[  153.288694] r8169 0000:04:00.0: eth0: link down
[  153.289400] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  154.853755] r8169 0000:04:00.0: eth0: link up
[  154.854306] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  159.057276] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[  159.064781] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[  159.163582] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  159.357212] r8169 0000:04:00.0: eth0: link down
[  159.357218] r8169 0000:04:00.0: eth0: link down
[  159.357485] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  160.897842] r8169 0000:04:00.0: eth0: link up
[  160.898393] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  171.269883] eth0: no IPv6 routers present
[  174.064280] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[  174.071756] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[  174.169189] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  174.460860] r8169 0000:04:00.0: eth0: link down
[  174.460871] r8169 0000:04:00.0: eth0: link down
[  174.461559] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  174.712395] r8169 0000:04:00.0: eth0: link down
[  174.713076] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  176.253367] r8169 0000:04:00.0: eth0: link up
[  176.253610] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  186.441349] eth0: no IPv6 routers present
randicus@debian:~$
This error is very "interesting."
A sneaky URL has been detected in your content. Please check your content and remove anything that might look like a URL
I suggest starting from the beginning. Where did you get the ISO, were there any problems during installation, etc.? Also, do the obvious and take a look through your dmesg report for anything that resembles a URL.
 

Members online


Top