Hi
I downloaded a device firmware.
Like this:
zetnu.xilinx-201907311618-autofreq-user-Update2UBI-NF-sig.tar.gz
I extract above file and file content is these files:
- BOOT.bin
- devicetree.dtb
- rootfs.jffs2
- uImage
Next to these files, was a file to install.
This file:
runme.sh
This file content is this:
Above code used nandwrite to write in a device.
Now, I want mount these images to a directory or partitions. and add or change somethings to these images. next write again to images.
How can I do it?
Step 1, I just want to mount and read file and directories.
Please help me.
Thanks
I downloaded a device firmware.
Like this:
zetnu.xilinx-201907311618-autofreq-user-Update2UBI-NF-sig.tar.gz
I extract above file and file content is these files:
- BOOT.bin
- devicetree.dtb
- rootfs.jffs2
- uImage
Next to these files, was a file to install.
This file:
runme.sh
This file content is this:
Bash:
#!/bin/sh -e
path=$(pwd)
cp_config="all"
if [ ! -d /mnt/upgrade ];
then
mkdir /mnt/upgrade
fi
if [ -e /usr/bin/ctrl_bd ]; then
ret=`cat /usr/bin/ctrl_bd | grep "XILINX" | wc -l`
else
ret=0
fi
if [ $ret -eq 1 ];then
cd ./xilinx
if [ -e /dev/ubi_ctrl ];then
if [ ! -d /mnt/config ];then
mkdir /mnt/config
fi
ubiattach /dev/ubi_ctrl -m 2
mount -t ubifs ubi1:rootfs /mnt/config
if [ ! -d /mnt/config/home/usr_config ];then
mkdir /mnt/config/home/usr_config
fi
if [ `ls /mnt/config/home/usr_config | wc -l` -gt 1 ];then
cp_config="all" #cp -r /config/* /mnt/config/home/usr_config/
else
cp_config="mac" #cp -r /config/mac /mnt/config/home/usr_config/
fi
umount /mnt/config
ubidetach -d 1 /dev/ubi_ctrl
fi
if [ -e BOOT.bin ]; then
flash_erase /dev/mtd0 0x0 0x80 >/dev/null 2>&1
nandwrite -p -s 0x0 /dev/mtd0 ./BOOT.bin >/dev/null 2>&1
rm -rf BOOT.bin
fi
if [ -e devicetree.dtb ]; then
flash_erase /dev/mtd0 0x1020000 0x1 >/dev/null 2>&1
nandwrite -p -s 0x1020000 /dev/mtd0 ./devicetree.dtb >/dev/null 2>&1
rm devicetree.dtb
fi
if [ -e uImage ]; then
flash_erase /dev/mtd0 0x1100000 0x40 >/dev/null 2>&1
nandwrite -p -s 0x1100000 /dev/mtd0 ./uImage >/dev/null 2>&1
rm uImage
fi
if [ -e rootfs.jffs2 ]; then
if [ -f /dev/mtd3 ];then
flash_erase /dev/mtd2 0x0 0x1E0 >/dev/null 2>&1
else
flash_erase /dev/mtd2 0x0 0x280 >/dev/null 2>&1
fi
nandwrite -p -s 0x0 /dev/mtd2 ./rootfs.jffs2 >/dev/null 2>&1
rm rootfs.jffs2
fi
if [ -e /dev/ubi_ctrl ];then
if [ ! -d /mnt/config ];then
mkdir /mnt/config
fi
ubiattach /dev/ubi_ctrl -m 2
mount -t ubifs ubi1:rootfs /mnt/config
if [ ! -d /mnt/config/home/usr_config ];then
mkdir /mnt/config/home/usr_config
fi
if [ $cp_config == "all" ];then
cp -r /config/* /mnt/config/home/usr_config/
if [ -e ../lighttpd-htdigest.user ]; then
line1=`cat ../lighttpd-htdigest.user | wc -c`
if [ $line1 != "0" ]; then
cp -r ../lighttpd-htdigest.user /mnt/config/home/usr_config/lighttpd-htdigest.user
if [ -e ../shadow ]; then
line2=`cat ../shadow | wc -c`
if [ $line2 != "0" ]; then
cp /etc/shadow /mnt/config/home/usr_config/shadow
old_shd=`sed -n '1p' /mnt/config/home/usr_config/shadow`
o1=`echo ${old_shd:5}`
o2=${o1#*:}
new_shd=`cat ../shadow`
n1=$new_shd":"$o2
sed -i '1d' /mnt/config/home/usr_config/shadow
sed -i "1i $(echo $n1)" /mnt/config/home/usr_config/shadow
fi
fi
fi
fi
else
cp -r /config/mac /mnt/config/home/usr_config/
fi
sync
umount /mnt/config
ubidetach -d 1 /dev/ubi_ctrl
fi
if [ -e /dev/ubi_ctrl ];then
ubiattach /dev/ubi_ctrl -m 2
mount -t ubifs ubi1:rootfs /mnt/upgrade
cd /mnt/upgrade/upgrade
rm -rf /mnt/upgrade/upgrade/*
cd $path
if [ -e ./xilinx/angstrom_rootfs.jffs2 ];then
cp -rf ./xilinx/angstrom_rootfs.jffs2 /mnt/upgrade/upgrade
if [ -f /dev/mtd3 ];then
flash_erase /dev/mtd3 0 0xa0 >/dev/null 2>&1
fi
fi
flash_erase /dev/mtd0 0x1040000 0x1 >/dev/null 2>&1
nandwrite -p -s 0x1040000 /dev/mtd0 ./xilinx/upgrade-marker.bin >/dev/null 2>&1
sync
umount /mnt/upgrade
ubidetach -d 1 /dev/ubi_ctrl
fi
else
echo "this is not for c5"
fi
rm -rf *.tar.gz
#/sbin/reboot -f &
Above code used nandwrite to write in a device.
Now, I want mount these images to a directory or partitions. and add or change somethings to these images. next write again to images.
How can I do it?
Step 1, I just want to mount and read file and directories.
Please help me.
Thanks