Hello there,
I'll start by apologizing for my bad English, I can understand everything, but I have trouble writing
I'm noob with linux. I ran one small home linux debian server. It has 1 small hd (500gb) where i have Debian GNU/Linux 9 (stretch) running on it (yes its very outdated) and another 3 four tb drives running in raid-0 (yes, i understead i can loose all my data, i'm looking for performace)
So long story short, that is my home server, and i run just a few things on it, like a plex server, an ftp server and a torrent client. i build it like four years ago, and i did everything reading tutorials (and asking A LOT on irc channels). Everything i setup i did via terminal, altough i have it connected via kvm, so i can use the gui when i need/want.
Everything just works. I never had any issue at all. That is a default linux install, with a root and a sudo user. I never did the upgrade to buster because i'm afraid if something "break" after the upgrade, i'll not be able to fix it, or get it working by myself, so that is the reason i never touched it.
Some days ago, i have to manual turn off it, because we would have a "planed" power lost on my build, so i prefred to shut it down properly that time.
i did sudo poweroff but the server help lights on.
So i logged via kvm, and found it halted with this msg:
[ OK ] Unmounted /run/user/1000.
Unmounting /mnt...
[ FAILED ] Failed unmounting /mnt.
[ OK ] Reached target Shutdown.
[ 3281.455518 ] reboot: System Halted.
And after that as i said, the server continued powered up, them i have to keep power button off them it turns off.
Everything is default, the linux install, with users and apps, and BIOS. The only non default option at BIOS is "Wake on LAN" with i set to ON. I did tested it with that bios settings set to OFF and it hangs the same way on shutdown.
I"m not aware what i can paste here or not and i'm not here to cause spam or anything, so i'll just paste my fstab config. Maybe any of you guys can help me out fix that ?
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=ad4ca0cf-cba7-468f-a34a-0de9f5361dd5 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=xxxxxx-xxxxxxxx-xxxxx-xxxxxxx none swap sw 0 0
UUID=xxxxxx-xxxx-xxxx-xxxx-xxxxxx /mnt ext4 defaults,nofail,discard 0 0
/mnt/ftp /jail/glftpd/site none bind 0 0
And here is a df -h cmd
user@debian:~$ df -h
Filesystem Size Used Avail Use% Mounted on
udev 7.8G 0 7.8G 0% /dev
tmpfs 1.6G 63M 1.5G 4% /run
/dev/sda1 442G 5.3G 415G 2% /
tmpfs 7.8G 8.0K 7.8G 1% /dev/shm
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs 7.8G 0 7.8G 0% /sys/fs/cgroup
/dev/md0 11T 9.9T 481G 96% /mnt
tmpfs 1.6G 4.0K 1.6G 1% /run/user/111
tmpfs 1.6G 0 1.6G 0% /run/user/1000
If i can post any other specifig info, or any logs to help troubleshoot it please let me know.
Thank you in advance already.
I'll start by apologizing for my bad English, I can understand everything, but I have trouble writing
I'm noob with linux. I ran one small home linux debian server. It has 1 small hd (500gb) where i have Debian GNU/Linux 9 (stretch) running on it (yes its very outdated) and another 3 four tb drives running in raid-0 (yes, i understead i can loose all my data, i'm looking for performace)
So long story short, that is my home server, and i run just a few things on it, like a plex server, an ftp server and a torrent client. i build it like four years ago, and i did everything reading tutorials (and asking A LOT on irc channels). Everything i setup i did via terminal, altough i have it connected via kvm, so i can use the gui when i need/want.
Everything just works. I never had any issue at all. That is a default linux install, with a root and a sudo user. I never did the upgrade to buster because i'm afraid if something "break" after the upgrade, i'll not be able to fix it, or get it working by myself, so that is the reason i never touched it.
Some days ago, i have to manual turn off it, because we would have a "planed" power lost on my build, so i prefred to shut it down properly that time.
i did sudo poweroff but the server help lights on.
So i logged via kvm, and found it halted with this msg:
[ OK ] Unmounted /run/user/1000.
Unmounting /mnt...
[ FAILED ] Failed unmounting /mnt.
[ OK ] Reached target Shutdown.
[ 3281.455518 ] reboot: System Halted.
And after that as i said, the server continued powered up, them i have to keep power button off them it turns off.
Everything is default, the linux install, with users and apps, and BIOS. The only non default option at BIOS is "Wake on LAN" with i set to ON. I did tested it with that bios settings set to OFF and it hangs the same way on shutdown.
I"m not aware what i can paste here or not and i'm not here to cause spam or anything, so i'll just paste my fstab config. Maybe any of you guys can help me out fix that ?
# <file system> <mount point> <type> <options> <dump> <pass>
# / was on /dev/sda1 during installation
UUID=ad4ca0cf-cba7-468f-a34a-0de9f5361dd5 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=xxxxxx-xxxxxxxx-xxxxx-xxxxxxx none swap sw 0 0
UUID=xxxxxx-xxxx-xxxx-xxxx-xxxxxx /mnt ext4 defaults,nofail,discard 0 0
/mnt/ftp /jail/glftpd/site none bind 0 0
And here is a df -h cmd
user@debian:~$ df -h
Filesystem Size Used Avail Use% Mounted on
udev 7.8G 0 7.8G 0% /dev
tmpfs 1.6G 63M 1.5G 4% /run
/dev/sda1 442G 5.3G 415G 2% /
tmpfs 7.8G 8.0K 7.8G 1% /dev/shm
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs 7.8G 0 7.8G 0% /sys/fs/cgroup
/dev/md0 11T 9.9T 481G 96% /mnt
tmpfs 1.6G 4.0K 1.6G 1% /run/user/111
tmpfs 1.6G 0 1.6G 0% /run/user/1000
If i can post any other specifig info, or any logs to help troubleshoot it please let me know.
Thank you in advance already.