P
professor_jonny
Guest
Hi there I have an initial ram disk and im wondering how to add to it.
I have worked out my releace of busybox is compiled without some of the required items needed in my script such as the command stat and the image is missing some things i want to add in like xboxdrv and some dependancys like libusb.
I'm using the inital ram disk from a dsl image that is loosly based on debian I believe for a utilities disk for the xbox but the problem is I can't add packages as I dont know how to add them in as i can not compile them as it is missing a compiler and its dependancys and the typical sudo apt get install way of things.
How would I go about installing extra things into my image I'm guessing i need to make a custom image but how do i go about this as there is no command mkinitrd also in dsl?
My task is to eventually make a script to init the xbox from a custom linuxrc then read a second stage user modifiable script off a fatx partition which I have read write access to so one could modify things without tools to open up the image.
The script is designed flash multiple flash bios files to the xbox selectable via emulated keyboard presses using the xbox gampad/joystick driver it will dump bioses from the xbox check file sizes compair and flash to ensure no bad flashes and provide a log file for the user incase something goes wrong.
Eventually I will extend it futher to format partitions and write the operating system files on.
The game controller also can be customised as it will read the config file off the fatx partition and you basically have the option to do any thing you want or extend it with out opening up the initrd as the flash script and game controller config file is loaded from outside the initrd.
Here is what I have in my script's so far but it fails because of the missing things
So far it sets up the xbox special hardware and i2c drivers then mounts the fatx file system and loads the second stage script off the fatx partition.
I have tested the flash scripts sequences and logic and all work except for the game controller/keyboard driver and file size check's using the stat command.
If i could add in those two things I'd be happy.
linuxrc script in root of package
Flash script stored of fatx
game.cfg stored on fatx
I have worked out my releace of busybox is compiled without some of the required items needed in my script such as the command stat and the image is missing some things i want to add in like xboxdrv and some dependancys like libusb.
I'm using the inital ram disk from a dsl image that is loosly based on debian I believe for a utilities disk for the xbox but the problem is I can't add packages as I dont know how to add them in as i can not compile them as it is missing a compiler and its dependancys and the typical sudo apt get install way of things.
How would I go about installing extra things into my image I'm guessing i need to make a custom image but how do i go about this as there is no command mkinitrd also in dsl?
My task is to eventually make a script to init the xbox from a custom linuxrc then read a second stage user modifiable script off a fatx partition which I have read write access to so one could modify things without tools to open up the image.
The script is designed flash multiple flash bios files to the xbox selectable via emulated keyboard presses using the xbox gampad/joystick driver it will dump bioses from the xbox check file sizes compair and flash to ensure no bad flashes and provide a log file for the user incase something goes wrong.
Eventually I will extend it futher to format partitions and write the operating system files on.
The game controller also can be customised as it will read the config file off the fatx partition and you basically have the option to do any thing you want or extend it with out opening up the initrd as the flash script and game controller config file is loaded from outside the initrd.
Here is what I have in my script's so far but it fails because of the missing things
So far it sets up the xbox special hardware and i2c drivers then mounts the fatx file system and loads the second stage script off the fatx partition.
I have tested the flash scripts sequences and logic and all work except for the game controller/keyboard driver and file size check's using the stat command.
If i could add in those two things I'd be happy.
linuxrc script in root of package
Code:
#!/bin/bash
# linuxrc startup script inital script to setup flash enviroment and
# handle control over to second stage
#-----------------------------------------------------------------------------
# (c) Copyright 2002 Edgar Hucek <[email protected]>
# All Rights Reserved.
#
# http://xbox-linux.sourceforge.net
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation; either version
# 2 of the License, or (at your option) any later version.
#
# Neither Edgar Hucek nor xbox-linux admit liability nor provide
# warranty for any of this software. This material is provided
# "AS-IS" and at no charge.
#
# (c) Copyright 2002 Edgar Hucek <[email protected]>
#-----------------------------------------------------------------------------
# Modified by professor_jonny
# Dont email me I'm too busy :-)
#
#
#-----------------------------------------------------------------------------
# Output boot sequence to console
/bin/dmesg -n 1
# done
# Setup path
PATH=/bin:/sbin
export PATH
# done
# Setup user read write access
umask 022
#done
# Mount kernel and terminal
mount -t proc none /proc
mount -t devpts none /dev/pts
echo 0x100 > /proc/sys/kernel/real-root-dev
#done
# Make folders for mountpoints
mkdir -p /cdrom /ram /proc /mnt/xbox
# done
# Setup constants for paths to make easy changes in future
XBOXMOUNTPATH=/mnt/xbox
MASTERHDDEPARTITION=/dev/discs/disc0/part50
FLASHAPPPATH=/mnt/xbox/apps/flash
# done
# Loading i2c modules for the XBox DVD-Rom for control of dvd from yellow cable
insmod i2c-core
insmod i2c-xbox
insmod i2c-proc
insmod i2c-dev
# done
# load in fat and fatx kernel modules
insmod fat
insmod fatx
# done
# Mount $MASTERHDDEPARTITION at $XBOXMOUNTPATH
mount -t fatx -o rw $MASTERHDDEPARTITION $XBOXMOUNTPATH
# done
# Now fatxfile system is loaded and mounted setup xboxdrv xbox game controller driver and
# load config from from $XBOXMOUNTPATH/$FLASHAPPPATH
sudo xboxdrv --silent --config $FLASHAPPPATH/game.cfg
# done
# Force loading 2nd stage flash script from $XBOXMOUNTPATH/$FLASHAPPPATH/
# ignoring execute bit as we cant set it on a fatx partition
/bin/bash $FLASHAPPPATH/Flash.sh
# done
# end
Code:
#!/bin/bash
# second stage flash script to do the actual flashing and log file
# flash.sh setup file stored on xbox @ $XBOXMOUNTPATH
#-----------------------------------------------------
#
#
#
# (c) Copyright 2013 Professor_jonny
# All Rights Reserved.
#
# http://www.xbmc4xbox.org.uk
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation.
#
# This material is provided AS-IS" and at no charge if it
# makes your toaster catch fire dont blame me.
#
# (c) Copyright 2013
#-----------------------------------------------------
#
#
# Setup constants for paths to make easy changes in future
RELEASETITLE="MECHASSAULT RAINCOAT FLASH DISK MODDED BY PROFESSOR_JONNY"
XBOXMOUNTPATH=/mnt/xbox
FLASHAPPPATH=/mnt/xbox/apps/flash
# Setup constants for logic to make code more readable
FLASHED=0
DONE=1
ZEROCOND=0
DATE=`date`
LOGFILE=flash.log
ORGBIOSFILE=original_bios.bin
FLASHFILE0=256.bin
FLASHFILE1=512.bin
FLASHFILE2=1024.bin
FLASHFILESIZE0=262144
FLASHFILESIZE0=524288
FLASHFILESIZE0=1048576
FILESIZE0=1
FILESIZE1=1
FILESIZE2=1
# Check file sizes of flash files for peace of mind and ouput to screen.
# This could be extended to halt the xbox but ill give the user the ability
# to decide this.
echo -e "\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n"
echo
echo " $RELEASETITLE"
echo " ======================================================="
echo " flash file size check procedure."
echo
cd $FLASHAPPPATH
X=1
while [[ $x -le 3 ]]
do
FILENAME=$FLASHAPPPATH/$FLASHFILE$X
FILESIZE=$(stat -c %s $FILENAME)
echo "Size of $FILENAME = $FILESIZE bytes."
if [[$x -eq 0]]
then
[[FILESIZE = $FILESIZE0]]
fi
if [[$x -eq 1]]
then
[[[FILESIZE = $FILESIZE1]]
fi
if [[$x -eq 2]]
then
[[FILESIZE = $FILESIZE2]]
fi
x=$(($x+1))
done
#done
echo "-[ $RELEASETITLE started: $DATE ]-----" >>$LOGFILE
echo " " >>$LOGFILE
if $FILESIZE0=$FLASHFILESIZE0
then
echo " $FLASHFILE0 is correct" >>$LOGFILE
else
echo " $FLASHFILE0 is incorrect" >>$LOGFILE
fi
if $FILESIZE1=$FLASHFILESIZE1
then
echo " $FLASHFILE1 is correct" >>$LOGFILE
else
echo " $FLASHFILE1 is incorrect" >>$LOGFILE
fi
if $FILESIZE2=$FLASHFILESIZE2
then
echo " $FLASHFILE2 is correct" >>$LOGFILE
else
echo " $FLASHFILE2 is incorrect" >>$LOGFILE
fi
sleep 50
# Nice screen art
echo -e "\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n"
echo
echo " $RELEASETITLE based on raincoat 0.5"
echo " ======================================================="
echo
echo " Modified release by Professor_jonny."
echo
echo " Check http://www.xbmc4xbox.org.uk for news and updates."
echo
echo " Press A to flash 256k bios"
echo
echo " Press X to flash 512k bios"
echo
echo " Press Y to flash 1024k bios"
echo
echo " Press B to shutdown with out flash or wait"
echo
echo " !!!!WARNING!!!!!"
echo " SELECT THE CORRECT ONE AND BE SURE THE BIOS IS THE CORRECT SIZE IN THE XBOX APP DIR"
echo
echo " --------------------------------------"
echo
# If no key is pressed with in 10 seconds shutdown console (in a nice way)
if read -n 1 -t 10 RESPONCE;
then
echo "Great, you made it in time!"
wait 5
else
echo "Sorry, you are too slow in selecting an option and I will now shutdown!"
wait 5
sleep 50
halt -n -f -p
fi
#-----------------------------------------------------
# user selected X Flash 256k bios
if $responce -eq X
then
# Flash procedure script
cd $FLASHAPPPATH
/bin/test -e $XBOXMOUNTPATH/$ORGBIOSFILE
FILEEXIST=$?
if /bin/test $FILEEXIST -ne $ZEROCOND
then
/bin/raincoat -r $XBOXMOUNTPATH/$ORGBIOSFILE -v >>$LOGFILE
echo " " >>$LOGFILE
echo " Saved original bios..."
fi
/bin/raincoat -p $FLASHFILE0 -v >>$LOGFILE
FLASHRTN=$?
if /bin/test $FLASHRTN -eq $ZEROCOND
then
echo " " >>$LOGFILE
echo " Flashed ok..."
echo " Power off..."
cd /
sleep 15
halt -n -f -p
else
echo " " >>$LOGFILE
echo " Flashing failed, check $LOGFILE for result..."
echo " DVD tray eject..."
cd /
sleep 15
eject.xbox.real
while :
do
sleep 5
done
fi
fi
#-----------------------------------------------------
# user selected X Flash 512k bios
if $responce -eq X
then
# Flash procedure script
cd $FLASHAPPPATH
/bin/test -e $XBOXMOUNTPATH/$ORGBIOSFILE
FILEEXIST=$?
if /bin/test $FILEEXIST -ne $ZEROCOND
then
/bin/raincoat -r $XBOXMOUNTPATH/$ORGBIOSFILE -v >>$LOGFILE
echo " " >>$LOGFILE
echo " Saved original bios..."
fi
/bin/raincoat -p $FLASHFILE1 -v >>$LOGFILE
FLASHRTN=$?
if /bin/test $FLASHRTN -eq $ZEROCOND
then
echo " " >>$LOGFILE
echo " Flashed ok..."
echo " Power off..."
cd /
umount $XBOXMOUNTPATH
sleep 15
halt -n -f -p
else
echo " " >>$LOGFILE
echo " Flashing failed, check $LOGFILE for result..."
echo " DVD tray eject..."
cd /
sleep 15
eject.xbox.real
while :
do
sleep 5
done
fi
fi
#-----------------------------------------------------
# user selected Y Flash 1024k bios
if $responce -eq Y
then
# Flash procedure script
cd $FLASHAPPPATH
/bin/test -e $XBOXMOUNTPATH/$ORGBIOSFILE
FILEEXIST=$?
if /bin/test $FILEEXIST -ne $ZEROCOND
then
/bin/raincoat -r $XBOXMOUNTPATH/$ORGBIOSFILE -v >>$LOGFILE
echo " " >>$LOGFILE
echo " Saved original bios..."
fi
/bin/raincoat -p $FLASHFILE2 -v >>$LOGFILE
FLASHRTN=$?
if /bin/test $FLASHRTN -eq $ZEROCOND
then
echo " " >>$LOGFILE
echo " Flashed ok..."
echo " Power off..."
cd /
sleep 15
halt -n -f -p
else
echo " " >>$LOGFILE
echo " Flashing failed, check $LOGFILE for result..."
echo " DVD tray eject..."
cd /
sleep 15
eject.xbox.real
while :
do
sleep 5
done
fi
fi
#-----------------------------------------------------
# dont flash user selected shutdown
if $responce -eq B
then
echo " Flashing failed, user selected shutdown" >>$LOGFILE
echo " Flashing failed, check $LOGFILE for result..."
sleep 15
halt -n -f -p
fi
# endgame.cfg stored on fatx
Code:
#!/bin/bash
#-----------------------------------------------------
# game.cfg xboxdrv keyboard setup file stored on xbox @ $XBOXMOUNTPATH
#
#
# (c) Copyright 2013 Professor_jonny
# All Rights Reserved.
#
# http://www.xbmc4xbox.org.uk
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU General Public License
# as published by the Free Software Foundation.
#
# This material is provided AS-IS" and at no charge if it
# makes your toaster catch fire dont blame me.
#
# (c) Copyright 2013
#-----------------------------------------------------
#
#
# A is keyboard key A
# B is keyboard key B
# X is keyboard key X
# Y is keyboard key Y
[xboxdrv]
ui-clear=true
trigger-as-button = true
silent = true
[ui-buttonmap]
a = KEY_A
b = KEY_B
x = KEY_X
y = KEY_Y
# EOF #
