I've been trying to troubleshoot an issue I've been seeing in QEMU/KVM/Virt manager where the libvirtd service upon startup throws the following error:
Upon further searching online trying to figure out why this is not working, some of the folks mentioned that this is due to not having a rule setup in UDEV for Vendor ID. When I check this using:
Based on my understanding, this is not the case, as the Vendor ID actually is configured:
What is interesting is that for USB1 (1-11) I do not see this property:
Am I missing something? Not really sure if its related to some IDs missing while others are there? Anyone run into this issue before?
I can confirm this happens on every new install I've done minus Fedora.
Btw, QEMU/KVM work, no issues.. just that I am seeing these errors after installation.
Code:
Sep 09 22:27:12 end0S libvirtd[487]: internal error: Missing udev property 'ID_VENDOR_ID' on 'usb1'
Sep 09 22:27:12 end0S libvirtd[487]: internal error: Missing udev property 'ID_VENDOR_ID' on '1-11'
Sep 09 22:27:12 end0S libvirtd[487]: internal error: Missing udev property 'ID_VENDOR_ID' on '1-5'
Sep 09 22:27:12 end0S libvirtd[487]: internal error: Missing udev property 'ID_VENDOR_ID' on '1-5.1'
Sep 09 22:27:12 end0S libvirtd[487]: internal error: Missing udev property 'ID_VENDOR_ID' on '1-5.3'
Sep 09 22:27:12 end0S libvirtd[487]: internal error: Missing udev property 'ID_VENDOR_ID' on '1-9'
Upon further searching online trying to figure out why this is not working, some of the folks mentioned that this is due to not having a rule setup in UDEV for Vendor ID. When I check this using:
Code:
udevadm info --export-db
Based on my understanding, this is not the case, as the Vendor ID actually is configured:
Code:
P: /devices/pci0000:00/0000:00:14.0/usb1/1-11
N: bus/usb/001/005
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-11
E: SUBSYSTEM=usb
E: DEVNAME=/dev/bus/usb/001/005
E: DEVTYPE=usb_device
E: DRIVER=usb
E: PRODUCT=5e3/610/3298
E: TYPE=9/0/2
E: BUSNUM=001
E: DEVNUM=005
E: MAJOR=189
E: MINOR=4
E: USEC_INITIALIZED=4990390
E: ID_VENDOR=05e3
E: ID_VENDOR_ENC=05e3
E: ID_VENDOR_ID=05e3
E: ID_MODEL=USB2.0_Hub
E: ID_MODEL_ENC=USB2.0\x20Hub
E: ID_MODEL_ID=0610
E: ID_REVISION=3298
E: ID_SERIAL=05e3_USB2.0_Hub
E: ID_BUS=usb
E: ID_USB_INTERFACES=:090001:090002:
E: ID_VENDOR_FROM_DATABASE=Genesys Logic, Inc.
E: ID_AUTOSUSPEND=1
E: ID_MODEL_FROM_DATABASE=Hub
E: ID_PATH=pci-0000:00:14.0-usb-0:11
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_11
E: ID_FOR_SEAT=usb-pci-0000_00_14_0-usb-0_11
E: TAGS=:seat:
E: CURRENT_TAGS=:seat:
What is interesting is that for USB1 (1-11) I do not see this property:
Code:
P: /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0
L: 0
E: DEVPATH=/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0
E: SUBSYSTEM=usb
E: DEVTYPE=usb_interface
E: DRIVER=hub
E: PRODUCT=5e3/610/3298
E: TYPE=9/0/2
E: INTERFACE=9/0/2
E: MODALIAS=usb:v05E3p0610d3298dc09dsc00dp02ic09isc00ip02in00
E: USEC_INITIALIZED=5656720
E: ID_USB_CLASS_FROM_DATABASE=Hub
E: ID_USB_PROTOCOL_FROM_DATABASE=TT per port
E: ID_VENDOR_FROM_DATABASE=Genesys Logic, Inc.
E: ID_AUTOSUSPEND=1
E: ID_MODEL_FROM_DATABASE=Hub
E: ID_PATH=pci-0000:00:14.0-usb-0:11:1.0
E: ID_PATH_TAG=pci-0000_00_14_0-usb-0_11_1_0
Am I missing something? Not really sure if its related to some IDs missing while others are there? Anyone run into this issue before?
I can confirm this happens on every new install I've done minus Fedora.
Btw, QEMU/KVM work, no issues.. just that I am seeing these errors after installation.