XARGS(1) General Commands Manual XARGS(1)
NAME
xargs - build and execute command lines from standard input
SYNOPSIS
xargs [-0prtx] [-E eof-str] [-e[eof-str]] [--eof[=eof-str]] [--null] [-d delimiter] [--delimiter delimiter]
[-I replace-str] [-i[replace-str]] [--replace[=replace-str]] [-l[max-lines]] [-L max-lines] [--max-lines[=max-
lines]] [-n max-args] [--max-args=max-args] [-s max-chars] [--max-chars=max-chars] [-P max-procs]
[--max-procs=max-procs] [--process-slot-var=name] [--interactive] [--verbose] [--exit] [--no-run-if-empty]
[--arg-file=file] [--show-limits] [--version] [--help] [command [initial-arguments]]
DESCRIPTION
This manual page documents the GNU version of xargs. xargs reads items from the standard input, delimited by
blanks (which can be protected with double or single quotes or a backslash) or newlines, and executes the com‐
mand (default is /bin/echo) one or more times with any initial-arguments followed by items read from standard
input. Blank lines on the standard input are ignored.
The command line for command is built up until it reaches a system-defined limit (unless the -n and -L options
are used). The specified command will be invoked as many times as necessary to use up the list of input
items. In general, there will be many fewer invocations of command than there were items in the input. This
will normally have significant performance benefits. Some commands can usefully be executed in parallel too;
see the -P option.
Because Unix filenames can contain blanks and newlines, this default behaviour is often problematic; filenames
containing blanks and/or newlines are incorrectly processed by xargs. In these situations it is better to use
the -0 option, which prevents such problems. When using this option you will need to ensure that the program
which produces the input for xargs also uses a null character as a separator. If that program is GNU find for
example, the -print0 option does this for you.
If any invocation of the command exits with a status of 255, xargs will stop immediately without reading any
further input. An error message is issued on stderr when this happens.
OPTIONS
-0, --null
Input items are terminated by a null character instead of by whitespace, and the quotes and backslash
are not special (every character is taken literally). Disables the end of file string, which is treat‐
ed like any other argument. Useful when input items might contain white space, quote marks, or back‐
slashes. The GNU find -print0 option produces input suitable for this mode.
-a file, --arg-file=file
Read items from file instead of standard input. If you use this option, stdin remains unchanged when
commands are run. Otherwise, stdin is redirected from /dev/null.
--delimiter=delim, -d delim
Input items are terminated by the specified character. The specified delimiter may be a single charac‐
ter, a C-style character escape such as \n, or an octal or hexadecimal escape code. Octal and hexadec‐
imal escape codes are understood as for the printf command. Multibyte characters are not supported.
When processing the input, quotes and backslash are not special; every character in the input is taken
literally. The -d option disables any end-of-file string, which is treated like any other argument.
You can use this option when the input consists of simply newline-separated items, although it is al‐
most always better to design your program to use --null where this is possible.
-E eof-str
Set the end of file string to eof-str. If the end of file string occurs as a line of input, the rest
-i [replace-str], --replace[=replace-str]
This option is a synonym for -Ireplace-str if replace-str is specified. If the replace-str argument is
missing, the effect is the same as -I{}. This option is deprecated; use -I instead.
-L max-lines
Use at most max-lines nonblank input lines per command line. Trailing blanks cause an input line to be
logically continued on the next input line. Implies -x.
-l [max-lines], --max-lines[=max-lines]
Synonym for the -L option. Unlike -L, the max-lines argument is optional. If max-lines is not speci‐
fied, it defaults to one. The -l option is deprecated since the POSIX standard specifies -L instead.
-n max-args, --max-args=max-args
Use at most max-args arguments per command line. Fewer than max-args arguments will be used if the
size (see the -s option) is exceeded, unless the -x option is given, in which case xargs will exit.
-P max-procs, --max-procs=max-procs
Run up to max-procs processes at a time; the default is 1. If max-procs is 0, xargs will run as many
processes as possible at a time. Use the -n option or the -L option with -P; otherwise chances are
that only one exec will be done. While xargs is running, you can send its process a SIGUSR1 signal to
increase the number of commands to run simultaneously, or a SIGUSR2 to decrease the number. You cannot
decrease it below 1. xargs never terminates its commands; when asked to decrease, it merely waits for
more than one existing command to terminate before starting another.
-p, --interactive
Prompt the user about whether to run each command line and read a line from the terminal. Only run the
command line if the response starts with `y' or `Y'. Implies -t.
--process-slot-var=name
Set the environment variable name to a unique value in each running child process. Values are reused
once child processes exit. This can be used in a rudimentary load distribution scheme, for example.
-r, --no-run-if-empty
If the standard input does not contain any nonblanks, do not run the command. Normally, the command is
run once even if there is no input. This option is a GNU extension.
-s max-chars, --max-chars=max-chars
Use at most max-chars characters per command line, including the command and initial-arguments and the
terminating nulls at the ends of the argument strings. The largest allowed value is system-dependent,
and is calculated as the argument length limit for exec, less the size of your environment, less 2048
bytes of headroom. If this value is more than 128KiB, 128Kib is used as the default value; otherwise,
the default value is the maximum. 1KiB is 1024 bytes. xargs automatically adapts to tighter con‐
straints.
--show-limits
Display the limits on the command-line length which are imposed by the operating system, xargs' choice
of buffer size and the -s option. Pipe the input from /dev/null (and perhaps specify --no-run-if-emp‐
ty) if you don't want xargs to do anything.
-t, --verbose
Print the command line on the standard error output before executing it.
-x, --exit
Exit if the size (see the -s option) is exceeded.
find /tmp -name core -type f -print0 | xargs -0 /bin/rm -f
Find files named core in or below the directory /tmp and delete them, processing filenames in such a way that
file or directory names containing spaces or newlines are correctly handled.
find /tmp -depth -name core -type f -delete
Find files named core in or below the directory /tmp and delete them, but more efficiently than in the previ‐
ous example (because we avoid the need to use fork(2) and exec(2) to launch rm and we don't need the extra
xargs process).
cut -d: -f1 < /etc/passwd | sort | xargs echo
Generates a compact listing of all the users on the system.
xargs sh -c 'emacs "$@" < /dev/tty' emacs
Launches the minimum number of copies of Emacs needed, one after the other, to edit the files listed on xargs'
standard input. This example achieves the same effect as BSD's -o option, but in a more flexible and portable
way.
EXIT STATUS
xargs exits with the following status:
0 if it succeeds
123 if any invocation of the command exited with status 1-125
124 if the command exited with status 255
125 if the command is killed by a signal
126 if the command cannot be run
127 if the command is not found
1 if some other error occurred.
Exit codes greater than 128 are used by the shell to indicate that a program died due to a fatal signal.
STANDARDS CONFORMANCE
As of GNU xargs version 4.2.9, the default behaviour of xargs is not to have a logical end-of-file marker.
POSIX (IEEE Std 1003.1, 2004 Edition) allows this.
The -l and -i options appear in the 1997 version of the POSIX standard, but do not appear in the 2004 version
of the standard. Therefore you should use -L and -I instead, respectively.
The POSIX standard allows implementations to have a limit on the size of arguments to the exec functions.
This limit could be as low as 4096 bytes including the size of the environment. For scripts to be portable,
they must not rely on a larger value. However, I know of no implementation whose actual limit is that small.
The --show-limits option can be used to discover the actual limits in force on the current system.
SEE ALSO
When you use the -I option, each line read from the input is buffered internally. This means that there is
an upper limit on the length of input line that xargs will accept when used with the -I option. To work
around this limitation, you can use the -s option to increase the amount of buffer space that xargs uses, and
you can also use an extra invocation of xargs to ensure that very long lines do not occur. For example:
somecommand | xargs -s 50000 echo | xargs -I '{}' -s 100000 rm '{}'
Here, the first invocation of xargs has no input line length limit because it doesn't use the -i option. The
second invocation of xargs does have such a limit, but we have ensured that the it never encounters a line
which is longer than it can handle. This is not an ideal solution. Instead, the -i option should not impose
a line length limit, which is why this discussion appears in the BUGS section. The problem doesn't occur with
the output of find(1) because it emits just one filename per line.
The best way to report a bug is to use the form at http://savannah.gnu.org/bugs/?group=findutils. The reason
for this is that you will then be able to track progress in fixing the problem. Other comments about
xargs(1) and about the findutils package in general can be sent to the bug-findutils mailing list. To join
the list, send email to [email protected].
XARGS(1)
Back to main site | Back to man page index