PS(1) User Commands PS(1)
NAME
ps - report a snapshot of the current processes.
SYNOPSIS
ps [options]
DESCRIPTION
ps displays information about a selection of the active processes. If you want a repetitive update of the
selection and the displayed information, use top(1) instead.
This version of ps accepts several kinds of options:
1 UNIX options, which may be grouped and must be preceded by a dash.
2 BSD options, which may be grouped and must not be used with a dash.
3 GNU long options, which are preceded by two dashes.
Options of different types may be freely mixed, but conflicts can appear. There are some synonymous options,
which are functionally identical, due to the many standards and ps implementations that this ps is compatible
with.
Note that "ps -aux" is distinct from "ps aux". The POSIX and UNIX standards require that "ps -aux" print all
processes owned by a user named "x", as well as printing all processes that would be selected by the -a
option. If the user named "x" does not exist, this ps may interpret the command as "ps aux" instead and print
a warning. This behavior is intended to aid in transitioning old scripts and habits. It is fragile, subject
to change, and thus should not be relied upon.
By default, ps selects all processes with the same effective user ID (euid=EUID) as the current user and
associated with the same terminal as the invoker. It displays the process ID (pid=PID), the terminal
associated with the process (tname=TTY), the cumulated CPU time in [DD-]hh:mm:ss format (time=TIME), and the
executable name (ucmd=CMD). Output is unsorted by default.
The use of BSD-style options will add process state (stat=STAT) to the default display and show the command
args (args=COMMAND) instead of the executable name. You can override this with the PS_FORMAT environment
variable. The use of BSD-style options will also change the process selection to include processes on other
terminals (TTYs) that are owned by you; alternately, this may be described as setting the selection to be the
set of all processes filtered to exclude processes owned by other users or not on a terminal. These effects
are not considered when options are described as being "identical" below, so -M will be considered identical
to Z and so on.
Except as described below, process selection options are additive. The default selection is discarded, and
then the selected processes are added to the set of processes to be displayed. A process will thus be shown
if it meets any of the given selection criteria.
EXAMPLES
To see every process on the system using standard syntax:
ps -e
ps -ef
ps -eF
ps -ely
To see every process on the system using BSD syntax:
ps ax
ps axu
To print a process tree:
ps -ejH
ps -U root -u root u
To see every process with a user-defined format:
ps -eo pid,tid,class,rtprio,ni,pri,psr,pcpu,stat,wchan:14,comm
ps axo stat,euid,ruid,tty,tpgid,sess,pgrp,ppid,pid,pcpu,comm
ps -Ao pid,tt,user,fname,tmout,f,wchan
Print only the process IDs of syslogd:
ps -C syslogd -o pid=
Print only the name of PID 42:
ps -q 42 -o comm=
SIMPLE PROCESS SELECTION
a Lift the BSD-style "only yourself" restriction, which is imposed upon the set of all processes when
some BSD-style (without "-") options are used or when the ps personality setting is BSD-like. The set
of processes selected in this manner is in addition to the set of processes selected by other means.
An alternate description is that this option causes ps to list all processes with a terminal (tty), or
to list all processes when used together with the x option.
-A Select all processes. Identical to -e.
-a Select all processes except both session leaders (see getsid(2)) and processes not associated with a
terminal.
-d Select all processes except session leaders.
--deselect
Select all processes except those that fulfill the specified conditions (negates the selection).
Identical to -N.
-e Select all processes. Identical to -A.
g Really all, even session leaders. This flag is obsolete and may be discontinued in a future release.
It is normally implied by the a flag, and is only useful when operating in the sunos4 personality.
-N Select all processes except those that fulfill the specified conditions (negates the selection).
Identical to --deselect.
T Select all processes associated with this terminal. Identical to the t option without any argument.
r Restrict the selection to only running processes.
x Lift the BSD-style "must have a tty" restriction, which is imposed upon the set of all processes when
some BSD-style (without "-") options are used or when the ps personality setting is BSD-like. The set
of processes selected in this manner is in addition to the set of processes selected by other means.
An alternate description is that this option causes ps to list all processes owned by you (same EUID as
ps), or to list all processes when used together with the a option.
PROCESS SELECTION BY LIST
These options accept a single argument in the form of a blank-separated or comma-separated list. They can be
used multiple times. For example: ps -p "1 2" -p 3,4
-123 Identical to --pid 123.
Select by session OR by effective group name. Selection by session is specified by many standards, but
selection by effective group is the logical behavior that several other operating systems use. This ps
will select by session when the list is completely numeric (as sessions are). Group ID numbers will
work only when some group names are also specified. See the -s and --group options.
--Group grplist
Select by real group ID (RGID) or name. Identical to -G.
--group grplist
Select by effective group ID (EGID) or name. This selects the processes whose effective group name or
ID is in grplist. The effective group ID describes the group whose file access permissions are used by
the process (see getegid(2)). The -g option is often an alternative to --group.
p pidlist
Select by process ID. Identical to -p and --pid.
-p pidlist
Select by PID. This selects the processes whose process ID numbers appear in pidlist. Identical to p
and --pid.
--pid pidlist
Select by process ID. Identical to -p and p.
--ppid pidlist
Select by parent process ID. This selects the processes with a parent process ID in pidlist. That is,
it selects processes that are children of those listed in pidlist.
q pidlist
Select by process ID (quick mode). Identical to -q and --quick-pid.
-q pidlist
Select by PID (quick mode). This selects the processes whose process ID numbers appear in pidlist.
With this option ps reads the necessary info only for the pids listed in the pidlist and doesn't apply
additional filtering rules. The order of pids is unsorted and preserved. No additional selection
options, sorting and forest type listings are allowed in this mode. Identical to q and --quick-pid.
--quick-pid pidlist
Select by process ID (quick mode). Identical to -q and q.
-s sesslist
Select by session ID. This selects the processes with a session ID specified in sesslist.
--sid sesslist
Select by session ID. Identical to -s.
t ttylist
Select by tty. Nearly identical to -t and --tty, but can also be used with an empty ttylist to
indicate the terminal associated with ps. Using the T option is considered cleaner than using t with
an empty ttylist.
-t ttylist
Select by tty. This selects the processes associated with the terminals given in ttylist. Terminals
(ttys, or screens for text output) can be specified in several forms: /dev/ttyS1, ttyS1, S1. A plain
"-" may be used to select processes not attached to any terminal.
-u userlist
Select by effective user ID (EUID) or name. This selects the processes whose effective user name or ID
is in userlist.
The effective user ID describes the user whose file access permissions are used by the process (see
geteuid(2)). Identical to U and --user.
--User userlist
Select by real user ID (RUID) or name. Identical to -U.
--user userlist
Select by effective user ID (EUID) or name. Identical to -u and U.
OUTPUT FORMAT CONTROL
These options are used to choose the information displayed by ps. The output may differ by personality.
-c Show different scheduler information for the -l option.
--context
Display security context format (for SELinux).
-f Do full-format listing. This option can be combined with many other UNIX-style options to add
additional columns. It also causes the command arguments to be printed. When used with -L, the NLWP
(number of threads) and LWP (thread ID) columns will be added. See the c option, the format keyword
args, and the format keyword comm.
-F Extra full format. See the -f option, which -F implies.
--format format
user-defined format. Identical to -o and o.
j BSD job control format.
-j Jobs format.
l Display BSD long format.
-l Long format. The -y option is often useful with this.
-M Add a column of security data. Identical to Z (for SELinux).
O format
is preloaded o (overloaded). The BSD O option can act like -O (user-defined output format with some
common fields predefined) or can be used to specify sort order. Heuristics are used to determine the
behavior of this option. To ensure that the desired behavior is obtained (sorting or formatting),
specify the option in some other way (e.g. with -O or --sort). When used as a formatting option, it
is identical to -O, with the BSD personality.
-O format
Like -o, but preloaded with some default columns. Identical to -o pid,format,state,tname,time,command
or -o pid,format,tname,time,cmd, see -o below.
o format
macros that may be used to choose the default UNIX or BSD columns.
s Display signal format.
u Display user-oriented format.
v Display virtual memory format.
X Register format.
-y Do not show flags; show rss in place of addr. This option can only be used with -l.
Z Add a column of security data. Identical to -M (for SELinux).
OUTPUT MODIFIERS
c Show the true command name. This is derived from the name of the executable file, rather than from the
argv value. Command arguments and any modifications to them are thus not shown. This option
effectively turns the args format keyword into the comm format keyword; it is useful with the -f format
option and with the various BSD-style format options, which all normally display the command arguments.
See the -f option, the format keyword args, and the format keyword comm.
--cols n
Set screen width.
--columns n
Set screen width.
--cumulative
Include some dead child process data (as a sum with the parent).
e Show the environment after the command.
f ASCII art process hierarchy (forest).
--forest
ASCII art process tree.
h No header. (or, one header per screen in the BSD personality). The h option is problematic. Standard
BSD ps uses this option to print a header on each page of output, but older Linux ps uses this option
to totally disable the header. This version of ps follows the Linux usage of not printing the header
unless the BSD personality has been selected, in which case it prints a header on each page of output.
Regardless of the current personality, you can use the long options --headers and --no-headers to
enable printing headers each page or disable headers entirely, respectively.
-H Show process hierarchy (forest).
--headers
Repeat header lines, one per page of output.
k spec Specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. Choose a multi-letter key from
the STANDARD FORMAT SPECIFIERS section. The "+" is optional since default direction is increasing
numerical or lexicographic order. Identical to --sort.
Examples:
$PS_SYSMAP
$PS_SYSTEM_MAP
/proc/*/wchan
/boot/System.map-$(uname -r)
/boot/System.map
/lib/modules/$(uname -r)/System.map
/usr/src/linux/System.map
/System.map
n Numeric output for WCHAN and USER (including all types of UID and GID).
N namelist
Specify namelist file. Identical to -n, see -n above.
--no-headers
Print no header line at all. --no-heading is an alias for this option.
O order
Sorting order (overloaded). The BSD O option can act like -O (user-defined output format with some
common fields predefined) or can be used to specify sort order. Heuristics are used to determine the
behavior of this option. To ensure that the desired behavior is obtained (sorting or formatting),
specify the option in some other way (e.g. with -O or --sort).
For sorting, obsolete BSD O option syntax is O[+|-]k1[,[+|-]k2[,...]]. It orders the processes listing
according to the multilevel sort specified by the sequence of one-letter short keys k1,k2, ...
described in the OBSOLETE SORT KEYS section below. The "+" is currently optional, merely re-iterating
the default direction on a key, but may help to distinguish an O sort from an O format. The "-"
reverses direction only on the key it precedes.
--rows n
Set screen height.
S Sum up some information, such as CPU usage, from dead child processes into their parent. This is
useful for examining a system where a parent process repeatedly forks off short-lived children to do
work.
--sort spec
Specify sorting order. Sorting syntax is [+|-]key[,[+|-]key[,...]]. Choose a multi-letter key from
the STANDARD FORMAT SPECIFIERS section. The "+" is optional since default direction is increasing
numerical or lexicographic order. Identical to k. For example: ps jax --sort=uid,-ppid,+pid
w Wide output. Use this option twice for unlimited width.
-w Wide output. Use this option twice for unlimited width.
--width n
Set screen width.
THREAD DISPLAY
H Show threads as if they were processes.
-L Show threads, possibly with LWP and NLWP columns.
m Show threads after processes.
L List all format specifiers.
V Print the procps-ng version.
-V Print the procps-ng version.
--version
Print the procps-ng version.
NOTES
This ps works by reading the virtual files in /proc. This ps does not need to be setuid kmem or have any
privileges to run. Do not give this ps any special permissions.
This ps needs access to namelist data for proper WCHAN display. For kernels prior to 2.6, the System.map file
must be installed.
CPU usage is currently expressed as the percentage of time spent running during the entire lifetime of a
process. This is not ideal, and it does not conform to the standards that ps otherwise conforms to. CPU
usage is unlikely to add up to exactly 100%.
The SIZE and RSS fields don't count some parts of a process including the page tables, kernel stack, struct
thread_info, and struct task_struct. This is usually at least 20 KiB of memory that is always resident. SIZE
is the virtual size of the process (code+data+stack).
Processes marked <defunct> are dead processes (so-called "zombies") that remain because their parent has not
destroyed them properly. These processes will be destroyed by init(8) if the parent process exits.
If the length of the username is greater than the length of the display column, the numeric user ID is
displayed instead.
Commands options such as ps -aux are not recommended as it is a confusion of two different standards.
According to the POSIX and UNIX standards, the above command asks to display all processes with a TTY
(generally the commands users are running) plus all processes owned by a user named "x". If that user doesn't
exist, then ps will assume you really meant "ps aux".
PROCESS FLAGS
The sum of these values is displayed in the "F" column, which is provided by the flags output specifier:
1 forked but didn't exec
4 used super-user privileges
PROCESS STATE CODES
Here are the different values that the s, stat and state output specifiers (header "STAT" or "S") will display
to describe the state of a process:
D uninterruptible sleep (usually IO)
R running or runnable (on run queue)
S interruptible sleep (waiting for an event to complete)
T stopped by job control signal
t stopped by debugger during the tracing
W paging (not valid since the 2.6.xx kernel)
X dead (should never be seen)
Z defunct ("zombie") process, terminated but not reaped by its parent
values used in sorting are the internal values ps uses and not the "cooked" values used in some of the output
format fields (e.g. sorting on tty will sort into device number, not according to the terminal name
displayed). Pipe ps output into the sort(1) command if you want to sort the cooked values.
KEY LONG DESCRIPTION
c cmd simple name of executable
C pcpu cpu utilization
f flags flags as in long format F field
g pgrp process group ID
G tpgid controlling tty process group ID
j cutime cumulative user time
J cstime cumulative system time
k utime user time
m min_flt number of minor page faults
M maj_flt number of major page faults
n cmin_flt cumulative minor page faults
N cmaj_flt cumulative major page faults
o session session ID
p pid process ID
P ppid parent process ID
r rss resident set size
R resident resident pages
s size memory size in kilobytes
S share amount of shared pages
t tty the device number of the controlling tty
T start_time time process was started
U uid user ID number
u user user name
v vsize total VM size in KiB
y priority kernel scheduling priority
AIX FORMAT DESCRIPTORS
This ps supports AIX format descriptors, which work somewhat like the formatting codes of printf(1) and
printf(3). For example, the normal default output can be produced with this: ps -eo "%p %y %x %c". The
NORMAL codes are described in the next section.
CODE NORMAL HEADER
%C pcpu %CPU
%G group GROUP
%P ppid PPID
%U user USER
%a args COMMAND
%c comm COMMAND
%g rgroup RGROUP
%n nice NI
%p pid PID
%r pgid PGID
%t etime ELAPSED
%u ruser RUSER
%x time TIME
%y tty TTY
%z vsz VSZ
STANDARD FORMAT SPECIFIERS
CODE HEADER DESCRIPTION
%cpu %CPU cpu utilization of the process in "##.#" format. Currently, it is the CPU time used
divided by the time the process has been running (cputime/realtime ratio), expressed as
a percentage. It will not add up to 100% unless you are lucky. (alias pcpu).
%mem %MEM ratio of the process's resident set size to the physical memory on the machine,
expressed as a percentage. (alias pmem).
args COMMAND command with all its arguments as a string. Modifications to the arguments may be shown.
The output in this column may contain spaces. A process marked <defunct> is partly
dead, waiting to be fully destroyed by its parent. Sometimes the process args will be
unavailable; when this happens, ps will instead print the executable name in brackets.
(alias cmd, command). See also the comm format keyword, the -f option, and the c
option.
When specified last, this column will extend to the edge of the display. If ps can not
determine display width, as when output is redirected (piped) into a file or another
command, the output width is undefined (it may be 80, unlimited, determined by the TERM
variable, and so on). The COLUMNS environment variable or --cols option may be used to
exactly determine the width in this case. The w or -w option may be also be used to
adjust width.
blocked BLOCKED mask of the blocked signals, see signal(7). According to the width of the field, a 32
or 64-bit mask in hexadecimal format is displayed. (alias sig_block, sigmask).
bsdstart START time the command started. If the process was started less than 24 hours ago, the output
format is " HH:MM", else it is " Mmm:SS" (where Mmm is the three letters of the month).
See also lstart, start, start_time, and stime.
bsdtime TIME accumulated cpu time, user + system. The display format is usually "MMM:SS", but can be
shifted to the right if the process used more than 999 minutes of cpu time.
c C processor utilization. Currently, this is the integer value of the percent usage over
the lifetime of the process. (see %cpu).
caught CAUGHT mask of the caught signals, see signal(7). According to the width of the field, a 32 or
64 bits mask in hexadecimal format is displayed. (alias sig_catch, sigcatch).
cgroup CGROUP display control groups to which the process belongs.
class CLS scheduling class of the process. (alias policy, cls). Field's possible values are:
- not reported
TS SCHED_OTHER
FF SCHED_FIFO
RR SCHED_RR
B SCHED_BATCH
ISO SCHED_ISO
IDL SCHED_IDLE
? unknown value
cls CLS scheduling class of the process. (alias policy, cls). Field's possible values are:
comm COMMAND command name (only the executable name). Modifications to the command name will not be
shown. A process marked <defunct> is partly dead, waiting to be fully destroyed by its
parent. The output in this column may contain spaces. (alias ucmd, ucomm). See also
the args format keyword, the -f option, and the c option.
When specified last, this column will extend to the edge of the display. If ps can not
determine display width, as when output is redirected (piped) into a file or another
command, the output width is undefined (it may be 80, unlimited, determined by the TERM
variable, and so on). The COLUMNS environment variable or --cols option may be used to
exactly determine the width in this case. The w or -w option may be also be used to
adjust width.
command COMMAND See args. (alias args, command).
cp CP per-mill (tenths of a percent) CPU usage. (see %cpu).
cputime TIME cumulative CPU time, "[DD-]hh:mm:ss" format. (alias time).
drs DRS data resident set size, the amount of physical memory devoted to other than executable
code.
egid EGID effective group ID number of the process as a decimal integer. (alias gid).
egroup EGROUP effective group ID of the process. This will be the textual group ID, if it can be
obtained and the field width permits, or a decimal representation otherwise. (alias
group).
eip EIP instruction pointer.
esp ESP stack pointer.
etime ELAPSED elapsed time since the process was started, in the form [[DD-]hh:]mm:ss.
etimes ELAPSED elapsed time since the process was started, in seconds.
euid EUID effective user ID (alias uid).
euser EUSER effective user name. This will be the textual user ID, if it can be obtained and the
field width permits, or a decimal representation otherwise. The n option can be used to
force the decimal representation. (alias uname, user).
f F flags associated with the process, see the PROCESS FLAGS section. (alias flag, flags).
fgid FGID filesystem access group ID. (alias fsgid).
fgroup FGROUP filesystem access group ID. This will be the textual group ID, if it can be obtained
and the field width permits, or a decimal representation otherwise. (alias fsgroup).
flag F see f. (alias f, flags).
group GROUP see egroup. (alias egroup).
ignored IGNORED mask of the ignored signals, see signal(7). According to the width of the field, a 32
or 64 bits mask in hexadecimal format is displayed. (alias sig_ignore, sigignore).
ipcns IPCNS Unique inode number describing the namespace the process belongs to. See namespaces(7).
label LABEL security label, most commonly used for SELinux context data. This is for the Mandatory
Access Control ("MAC") found on high-security systems.
lstart STARTED time the command started. See also bsdstart, start, start_time, and stime.
lsession SESSION displays the login session identifier of a process, if systemd support has been
included.
lwp LWP light weight process (thread) ID of the dispatchable entity (alias spid, tid). See tid
for additional information.
machine MACHINE displays the machine name for processes assigned to VM or container, if systemd support
has been included.
maj_flt MAJFLT The number of major page faults that have occurred with this process.
min_flt MINFLT The number of minor page faults that have occurred with this process.
mntns MNTNS Unique inode number describing the namespace the process belongs to. See namespaces(7).
netns NETNS Unique inode number describing the namespace the process belongs to. See namespaces(7).
ni NI nice value. This ranges from 19 (nicest) to -20 (not nice to others), see nice(1).
(alias nice).
nice NI see ni.(alias ni).
nlwp NLWP number of lwps (threads) in the process. (alias thcount).
nwchan WCHAN address of the kernel function where the process is sleeping (use wchan if you want the
kernel function name). Running tasks will display a dash ('-') in this column.
ouid OWNER displays the Unix user identifier of the owner of the session of a process, if systemd
support has been included.
pcpu %CPU see %cpu. (alias %cpu).
pending PENDING mask of the pending signals. See signal(7). Signals pending on the process are distinct
from signals pending on individual threads. Use the m option or the -m option to see
both. According to the width of the field, a 32 or 64 bits mask in hexadecimal format
is displayed. (alias sig).
pgid PGID process group ID or, equivalently, the process ID of the process group leader. (alias
pgrp).
FF SCHED_FIFO
RR SCHED_RR
B SCHED_BATCH
ISO SCHED_ISO
IDL SCHED_IDLE
? unknown value
ppid PPID parent process ID.
pri PRI priority of the process. Higher number means lower priority.
psr PSR processor that process is currently assigned to.
rgid RGID real group ID.
rgroup RGROUP real group name. This will be the textual group ID, if it can be obtained and the field
width permits, or a decimal representation otherwise.
rss RSS resident set size, the non-swapped physical memory that a task has used (in kiloBytes).
(alias rssize, rsz).
rssize RSS see rss. (alias rss, rsz).
rsz RSZ see rss. (alias rss, rssize).
rtprio RTPRIO realtime priority.
ruid RUID real user ID.
ruser RUSER real user ID. This will be the textual user ID, if it can be obtained and the field
width permits, or a decimal representation otherwise.
s S minimal state display (one character). See section PROCESS STATE CODES for the
different values. See also stat if you want additional information displayed. (alias
state).
sched SCH scheduling policy of the process. The policies SCHED_OTHER (SCHED_NORMAL), SCHED_FIFO,
SCHED_RR, SCHED_BATCH, SCHED_ISO, and SCHED_IDLE are respectively displayed as 0, 1, 2,
3, 4, and 5.
seat SEAT displays the identifier associated with all hardware devices assigned to a specific
workplace, if systemd support has been included.
sess SESS session ID or, equivalently, the process ID of the session leader. (alias
session, sid).
sgi_p P processor that the process is currently executing on. Displays "*" if the process is
not currently running or runnable.
sgid SGID saved group ID. (alias svgid).
sgroup SGROUP saved group name. This will be the textual group ID, if it can be obtained and the
field width permits, or a decimal representation otherwise.
writable pages and then be swapped out. This number is very rough!
slice SLICE displays the slice unit which a process belongs to, if systemd support has been
included.
spid SPID see lwp. (alias lwp, tid).
stackp STACKP address of the bottom (start) of stack for the process.
start STARTED time the command started. If the process was started less than 24 hours ago, the output
format is "HH:MM:SS", else it is " Mmm dd" (where Mmm is a three-letter month name).
See also lstart, bsdstart, start_time, and stime.
start_time START starting time or date of the process. Only the year will be displayed if the process
was not started the same year ps was invoked, or "MmmDD" if it was not started the same
day, or "HH:MM" otherwise. See also bsdstart, start, lstart, and stime.
stat STAT multi-character process state. See section PROCESS STATE CODES for the different values
meaning. See also s and state if you just want the first character displayed.
state S see s. (alias s).
suid SUID saved user ID. (alias svuid).
supgid SUPGID group ids of supplementary groups, if any. See getgroups(2).
supgrp SUPGRP group names of supplementary groups, if any. See getgroups(2).
suser SUSER saved user name. This will be the textual user ID, if it can be obtained and the field
width permits, or a decimal representation otherwise. (alias svuser).
svgid SVGID see sgid. (alias sgid).
svuid SVUID see suid. (alias suid).
sz SZ size in physical pages of the core image of the process. This includes text, data, and
stack space. Device mappings are currently excluded; this is subject to change. See
vsz and rss.
tgid TGID a number representing the thread group to which a task belongs (alias pid). It is the
process ID of the thread group leader.
thcgr THCGR display control groups to which the thread belongs.
thcount THCNT see nlwp. (alias nlwp). number of kernel threads owned by the process.
tid TID the unique number representing a dispatchable entity (alias lwp, spid). This value may
also appear as: a process ID (pid); a process group ID (pgrp); a session ID for the
session leader (sid); a thread group ID for the thread group leader (tgid); and a tty
process group ID for the process group leader (tpgid).
ucmd CMD see comm. (alias comm, ucomm).
ucomm COMMAND see comm. (alias comm, ucmd).
uid UID see euid. (alias euid).
uname USER see euser. (alias euser, user).
unit UNIT displays unit which a process belongs to, if systemd support has been included.
user USER see euser. (alias euser, uname).
userns USERNS Unique inode number describing the namespace the process belongs to. See namespaces(7).
utsns UTSNS Unique inode number describing the namespace the process belongs to. See namespaces(7).
uunit UUNIT displays user unit which a process belongs to, if systemd support has been included.
vsize VSZ see vsz. (alias vsz).
vsz VSZ virtual memory size of the process in KiB (1024-byte units). Device mappings are
currently excluded; this is subject to change. (alias vsize).
wchan WCHAN name of the kernel function in which the process is sleeping, a "-" if the process is
running, or a "*" if the process is multi-threaded and ps is not displaying threads.
ENVIRONMENT VARIABLES
The following environment variables could affect ps:
COLUMNS
Override default display width.
LINES
Override default display height.
PS_PERSONALITY
Set to one of posix, old, linux, bsd, sun, digital... (see section PERSONALITY below).
CMD_ENV
Set to one of posix, old, linux, bsd, sun, digital... (see section PERSONALITY below).
I_WANT_A_BROKEN_PS
Force obsolete command line interpretation.
LC_TIME
Date format.
PS_COLORS
Not currently supported.
PS_FORMAT
POSIX2
When set to "on", acts as POSIXLY_CORRECT.
UNIX95
Don't find excuses to ignore bad "features".
_XPG
Cancel CMD_ENV=irix non-standard behavior.
In general, it is a bad idea to set these variables. The one exception is CMD_ENV or PS_PERSONALITY, which
could be set to Linux for normal systems. Without that setting, ps follows the useless and bad parts of the
Unix98 standard.
PERSONALITY
390 like the OS/390 OpenEdition ps
aix like AIX ps
bsd like FreeBSD ps (totally non-standard)
compaq like Digital Unix ps
debian like the old Debian ps
digital like Tru64 (was Digital Unix, was OSF/1) ps
gnu like the old Debian ps
hp like HP-UX ps
hpux like HP-UX ps
irix like Irix ps
linux ***** recommended *****
old like the original Linux ps (totally non-standard)
os390 like OS/390 Open Edition ps
posix standard
s390 like OS/390 Open Edition ps
sco like SCO ps
sgi like Irix ps
solaris2 like Solaris 2+ (SunOS 5) ps
sunos4 like SunOS 4 (Solaris 1) ps (totally non-standard)
svr4 standard
sysv standard
tru64 like Tru64 (was Digital Unix, was OSF/1) ps
unix standard
unix95 standard
unix98 standard
SEE ALSO
pgrep(1), pstree(1), top(1), proc(5).
STANDARDS
This ps conforms to:
1 Version 2 of the Single Unix Specification
2 The Open Group Technical Standard Base Specifications, Issue 6
3 IEEE Std 1003.1, 2004 Edition
4 X/Open System Interfaces Extension [UP XSI]
5 ISO/IEC 9945:2003
AUTHOR
procps-ng July 2014 PS(1)
Back to main site | Back to man page index