PROVE(1) User Contributed Perl Documentation PROVE(1)
NAME
prove - Run tests through a TAP harness.
USAGE
prove [options] [files or directories]
OPTIONS
Boolean options:
-v, --verbose Print all test lines.
-l, --lib Add 'lib' to the path for your tests (-Ilib).
-b, --blib Add 'blib/lib' and 'blib/arch' to the path for
your tests
-s, --shuffle Run the tests in random order.
-c, --color Colored test output (default).
--nocolor Do not color test output.
--count Show the X/Y test count when not verbose
(default)
--nocount Disable the X/Y test count.
-D --dry Dry run. Show test that would have run.
-f, --failures Show failed tests.
-o, --comments Show comments.
--ignore-exit Ignore exit status from test scripts.
-m, --merge Merge test scripts' STDERR with their STDOUT.
-r, --recurse Recursively descend into directories.
--reverse Run the tests in reverse order.
-q, --quiet Suppress some test output while running tests.
-Q, --QUIET Only print summary results.
-p, --parse Show full list of TAP parse errors, if any.
--directives Only show results with TODO or SKIP directives.
--timer Print elapsed time after each test.
--trap Trap Ctrl-C and print summary on interrupt.
--normalize Normalize TAP output in verbose output
-T Enable tainting checks.
-t Enable tainting warnings.
-W Enable fatal warnings.
-w Enable warnings.
-h, --help Display this help
-?, Display this help
-H, --man Longer manpage for prove
--norc Don't process default .proverc
Options that take arguments:
-I Library paths to include.
-P Load plugin (searches App::Prove::Plugin::*.)
-M Load a module.
-e, --exec Interpreter to run the tests ('' for compiled
tests.)
--ext Set the extension for tests (default '.t')
--harness Define test harness to use. See TAP::Harness.
--formatter Result formatter to use. See FORMATTERS.
--source Load and/or configure a SourceHandler. See
SOURCE HANDLERS.
-a, --archive out.tgz Store the resulting TAP in an archive file.
-j, --jobs N Run N test jobs in parallel (try 9.)
Additional option files may be specified with the "--rc" option. Default option file processing is disabled
by the "--norc" option.
Under Windows and VMS the option file is named _proverc rather than .proverc and is sought only in the current
directory.
Reading from "STDIN"
If you have a list of tests (or URLs, or anything else you want to test) in a file, you can add them to your
tests by using a '-':
prove - < my_list_of_things_to_test.txt
See the "README" in the "examples" directory of this distribution.
Default Test Directory
If no files or directories are supplied, "prove" looks for all files matching the pattern "t/*.t".
Colored Test Output
Colored test output is the default, but if output is not to a terminal, color is disabled. You can override
this by adding the "--color" switch.
Color support requires Term::ANSIColor on Unix-like platforms and Win32::Console windows. If the necessary
module is not installed colored output will not be available.
Exit Code
If the tests fail "prove" will exit with non-zero status.
Arguments to Tests
It is possible to supply arguments to tests. To do so separate them from prove's own arguments with the
arisdottle, '::'. For example
prove -v t/mytest.t :: --url http://example.com
would run t/mytest.t with the options '--url http://example.com'. When running multiple tests they will each
receive the same arguments.
"--exec"
Normally you can just pass a list of Perl tests and the harness will know how to execute them. However, if
your tests are not written in Perl or if you want all tests invoked exactly the same way, use the "-e", or
"--exec" switch:
prove --exec '/usr/bin/ruby -w' t/
prove --exec '/usr/bin/perl -Tw -mstrict -Ilib' t/
prove --exec '/path/to/my/customer/exec'
"--merge"
If you need to make sure your diagnostics are displayed in the correct order relative to test results you can
use the "--merge" option to merge the test scripts' STDERR into their STDOUT.
This guarantees that STDOUT (where the test results appear) and STDERR (where the diagnostics appear) will
stay in sync. The harness will display any diagnostics your tests emit on STDERR.
Caveat: this is a bit of a kludge. In particular note that if anything that appears on STDERR looks like a
options.
"last"
Run the same tests as the last time the state was saved. This makes it possible, for example, to recreate
the ordering of a shuffled test.
# Run all tests in random order
$ prove -b --state=save --shuffle
# Run them again in the same order
$ prove -b --state=last
"failed"
Run only the tests that failed on the last run.
# Run all tests
$ prove -b --state=save
# Run failures
$ prove -b --state=failed
If you also specify the "save" option newly passing tests will be excluded from subsequent runs.
# Repeat until no more failures
$ prove -b --state=failed,save
"passed"
Run only the passed tests from last time. Useful to make sure that no new problems have been introduced.
"all"
Run all tests in normal order. Multple options may be specified, so to run all tests with the failures
from last time first:
$ prove -b --state=failed,all,save
"hot"
Run the tests that most recently failed first. The last failure time of each test is stored. The "hot"
option causes tests to be run in most-recent- failure order.
$ prove -b --state=hot,save
Tests that have never failed will not be selected. To run all tests with the most recently failed first
use
$ prove -b --state=hot,all,save
This combination of options may also be specified thus
$ prove -b --state=adrian
"todo"
Run any tests with todos.
"slow"
Run the tests in oldest to newest order.
"fresh"
Run those test scripts that have been modified since the last test run.
"save"
Save the state on exit. The state is stored in a file called .prove (_prove on Windows and VMS) in the
current directory.
The "--state" switch may be used more than once.
$ prove -b --state=hot --state=all,save
--rules
The "--rules" option is used to control which tests are run sequentially and which are run in parallel, if the
"--jobs" option is specified. The option may be specified multiple times, and the order matters.
The most practical use is likely to specify that some tests are not "parallel-ready". Since mentioning a file
with --rules doens't cause it to selected to run as a test, you can "set and forget" some rules preferences in
your .proverc file. Then you'll be able to take maximum advantage of the performance benefits of parallel
testing, while some exceptions are still run in parallel.
--rules examples
# All tests are allowed to run in parallel, except those starting with "p"
--rules='seq=t/p*.t' --rules='par=**'
# All tests must run in sequence except those starting with "p", which should be run parallel
--rules='par=t/p*.t'
--rules resolution
· By default, all tests are eligible to be run in parallel. Specifying any of your own rules removes this
one.
· "First match wins". The first rule that matches a test will be the one that applies.
· Any test which does not match a rule will be run in sequence at the end of the run.
· The existence of a rule does not imply selecting a test. You must still specify the tests to run.
· Specifying a rule to allow tests to run in parallel does not make the run in parallel. You still need
specify the number of parallel "jobs" in your Harness object.
--rules Glob-style pattern matching
We implement our own glob-style pattern matching for --rules. Here are the supported patterns:
** is any number of characters, including /, within a pathname
* is zero or more characters within a filename/directory name
? is exactly one character within a filename/directory name
{foo,bar,baz} is any of foo, bar or baz.
\ is an escape character
Taint Mode
Normally when a Perl program is run in taint mode the contents of the "PERL5LIB" environment variable do not
appear in @INC.
Because "PERL5LIB" is often used during testing to add build directories to @INC prove passes the names of any
directories found in "PERL5LIB" as -I switches. The net effect of this is that "PERL5LIB" is honoured even
when prove is run in taint mode.
FORMATTERS
You can load a custom TAP::Parser::Formatter:
prove --formatter MyFormatter
SOURCE HANDLERS
You can load custom TAP::Parser::SourceHandlers, to change the way the parser interprets particular sources of
TAP.
prove --source MyHandler --source YetAnother t
If you want to provide config to the source you can use:
prove --source MyCustom \
--source Perl --perl-option 'foo=bar baz' --perl-option avg=0.278 \
--source File --file-option extensions=.txt --file-option extensions=.tmp t
--source pgTAP --pgtap-option pset=format=html --pgtap-option pset=border=2
Each "--$source-option" option must specify a key/value pair separated by an "=". If an option can take
multiple values, just specify it multiple times, as with the "extensions=" examples above. If the option
should be a hash reference, specify the value as a second pair separated by a "=", as in the "pset=" examples
above (escape "=" with a backslash).
All "--sources" are combined into a hash, and passed to "new" in TAP::Harness's "sources" parameter.
See TAP::Parser::IteratorFactory for more details on how configuration is passed to SourceHandlers.
PLUGINS
Plugins can be loaded using the "-Pplugin" syntax, eg:
prove -PMyPlugin
This will search for a module named "App::Prove::Plugin::MyPlugin", or failing that, "MyPlugin". If the
plugin can't be found, "prove" will complain & exit.
You can pass arguments to your plugin by appending "=arg1,arg2,etc" to the plugin name:
prove -PMyPlugin=fou,du,fafa
Please check individual plugin documentation for more details.
Available Plugins
For an up-to-date list of plugins available, please check CPAN:
<http://search.cpan.org/search?query=App%3A%3AProve+Plugin>
perl v5.16.3 2013-05-02 PROVE(1)
Back to main site | Back to man page index