perlbs2000 - building and installing Perl for BS2000. at Linux.org

Back to main site | Back to man page index

PERLBS2000(1) Perl Programmers Reference Guide PERLBS2000(1)

NAME
perlbs2000 - building and installing Perl for BS2000.

SYNOPSIS
This document will help you Configure, build, test and install Perl on BS2000 in the POSIX subsystem.

DESCRIPTION
This is a ported perl for the POSIX subsystem in BS2000 VERSION OSD V3.1A or later. It may work on other
versions, but we started porting and testing it with 3.1A and are currently using Version V4.0A.

You may need the following GNU programs in order to install perl:

gzip on BS2000
We used version 1.2.4, which could be installed out of the box with one failure during 'make check'.

bison on BS2000
The yacc coming with BS2000 POSIX didn't work for us. So we had to use bison. We had to make a few changes
to perl in order to use the pure (reentrant) parser of bison. We used version 1.25, but we had to add a few
changes due to EBCDIC. See below for more details concerning yacc.

Unpacking Perl Distribution on BS2000
To extract an ASCII tar archive on BS2000 POSIX you need an ASCII filesystem (we used the mountpoint
/usr/local/ascii for this). Now you extract the archive in the ASCII filesystem without I/O-conversion:

cd /usr/local/ascii export IO_CONVERSION=NO gunzip < /usr/local/src/perl.tar.gz | pax -r

You may ignore the error message for the first element of the archive (this doesn't look like a tar archive /
skipping to next file...), it's only the directory which will be created automatically anyway.

After extracting the archive you copy the whole directory tree to your EBCDIC filesystem. This time you use
I/O-conversion:

cd /usr/local/src IO_CONVERSION=YES cp -r /usr/local/ascii/perl5.005_02 ./

Compiling Perl on BS2000
There is a "hints" file for BS2000 called hints.posix-bc (because posix-bc is the OS name given by `uname`)
that specifies the correct values for most things. The major problem is (of course) the EBCDIC character set.
We have german EBCDIC version.

Because of our problems with the native yacc we used GNU bison to generate a pure (=reentrant) parser for
perly.y. So our yacc is really the following script:

-----8<-----/usr/local/bin/yacc-----8<----- #! /usr/bin/sh

# Bison as a reentrant yacc:

# save parameters: params="" while [[ $# -gt 1 ]]; do
params="$params $1"
shift done

# add flag %pure_parser:

tmpfile=/tmp/bison.$$.y echo %pure_parser > $tmpfile cat $1 >> $tmpfile

# call bison:

Testing Perl on BS2000
We still got a few errors during "make test". Some of them are the result of using bison. Bison prints
parser error instead of syntax error, so we may ignore them. The following list shows our errors, your
results may differ:

op/numconvert.......FAILED tests 1409-1440 op/regexp...........FAILED tests 483, 496
op/regexp_noamp.....FAILED tests 483, 496 pragma/overload.....FAILED tests 152-153, 170-171
pragma/warnings.....FAILED tests 14, 82, 129, 155, 192, 205, 207 lib/bigfloat........FAILED tests 351-352, 355
lib/bigfltpm........FAILED tests 354-355, 358 lib/complex.........FAILED tests 267, 487
lib/dumper..........FAILED tests 43, 45 Failed 11/231 test scripts, 95.24% okay. 57/10595 subtests failed,
99.46% okay.

Installing Perl on BS2000
We have no nroff on BS2000 POSIX (yet), so we ignored any errors while installing the documentation.

Using Perl in the Posix-Shell of BS2000
BS2000 POSIX doesn't support the shebang notation ("#!/usr/local/bin/perl"), so you have to use the following
lines instead:

: # use perl
eval 'exec /usr/local/bin/perl -S $0 ${1+"$@"}'
if $running_under_some_shell;

Using Perl in "native" BS2000
We don't have much experience with this yet, but try the following:

Copy your Perl executable to a BS2000 LLM using bs2cp:

"bs2cp /usr/local/bin/perl 'bs2:perl(perl,l)'"

Now you can start it with the following (SDF) command:

"/START-PROG FROM-FILE=*MODULE(PERL,PERL),PROG-MODE=*ANY,RUN-MODE=*ADV"

First you get the BS2000 commandline prompt ('*'). Here you may enter your parameters, e.g. "-e 'print "Hello
World!\\n";'" (note the double backslash!) or "-w" and the name of your Perl script. Filenames starting with
"/" are searched in the Posix filesystem, others are searched in the BS2000 filesystem. You may even use
wildcards if you put a "%" in front of your filename (e.g. "-w checkfiles.pl %*.c"). Read your C/C++ manual
for additional possibilities of the commandline prompt (look for PARAMETER-PROMPTING).

Floating point anomalies on BS2000
There appears to be a bug in the floating point implementation on BS2000 POSIX systems such that calling int()
on the product of a number and a small magnitude number is not the same as calling int() on the quotient of
that number and a large magnitude number. For example, in the following Perl code:

my $x = 100000.0;
my $y = int($x * 1e-5) * 1e5; # '0'
my $z = int($x / 1e+5) * 1e5; # '100000'
print "\$y is $y and \$z is $z\n"; # $y is 0 and $z is 100000

Although one would expect the quantities $y and $z to be the same and equal to 100000 they will differ and
instead will be 0 and 100000 respectively.

print $f "Hello World!\n";

to get two files containing "Hello World!\n" in ASCII, EBCDIC, ISO Latin-1 (in this example identical to
ASCII) respective UTF-EBCDIC (in this example identical to normal EBCDIC). See the documentation of
Encode::PerlIO for details.

As the PerlIO layer uses raw IO internally, all this totally ignores the type of your filesystem (ASCII or
EBCDIC) and the IO_CONVERSION environment variable. If you want to get the old behavior, that the BS2000 IO
functions determine conversion depending on the filesystem PerlIO still is your friend. You use IO_CONVERSION
as usual and tell Perl, that it should use the native IO layer:

export IO_CONVERSION=YES
export PERLIO=stdio

Now your IO would be ASCII on ASCII partitions and EBCDIC on EBCDIC partitions. See the documentation of
PerlIO (without "Encode::"!) for further possibilities.

AUTHORS
Thomas Dorner