802.1X Port-Based Authentication HOWTO

802.1X Port-Based Authentication HOWTO

Lars Strand

<lars strand (at) gnist org>

2004-08-18

Revision History
Revision 1.0	2004-10-18	Revised by: LKS
Initial Release, reviewed by TLDP.
Revision 0.2b	2004-10-13	Revised by: LKS
Various updates. Thanks to Rick Moen <rick (at) linuxmafia com> for language review.
Revision 0.0	2004-07-23	Revised by: LKS
Initial draft.

This document describes the software and procedures to set up and use IEEE 802.1X Port-Based Network Access Control using Xsupplicant as Supplicant with FreeRADIUS as a back-end Authentication Server.

Table of Contents

1. Introduction

1.1. What is 802.1X?
1.2. What is 802.11i?
1.3. What is EAP?
1.4. EAP authentication methods
1.5. What is RADIUS?

2. Obtaining Certificates

3. Authentication Server: Setting up FreeRADIUS

3.1. Installing FreeRADIUS
3.2. Configuring FreeRADIUS

4. Supplicant: Setting up Xsupplicant

4.1. Installing Xsupplicant
4.2. Configuring Xsupplicant

5. Authenticator: Setting up the Authenticator (Access Point)

5.1. Access Point
5.2. Linux Authenticator

6.1. Testcase
6.2. Running some tests

7. Note about driver support and Xsupplicant

8. FAQ

9. Useful Resources

10. Copyright, acknowledgments and miscellaneous

10.1. Copyright and License
10.2. How this document was produced
10.3. Feedback
10.4. Acknowledgments

A. GNU Free Documentation License

A.1. PREAMBLE
A.2. APPLICABILITY AND DEFINITIONS
A.3. VERBATIM COPYING
A.4. COPYING IN QUANTITY
A.5. MODIFICATIONS
A.6. COMBINING DOCUMENTS
A.7. COLLECTIONS OF DOCUMENTS
A.8. AGGREGATION WITH INDEPENDENT WORKS
A.9. TRANSLATION
A.10. TERMINATION
A.11. FUTURE REVISIONS OF THIS LICENSE
A.12. ADDENDUM: How to use this License for your documents

		Next
		Introduction

Comments: feedback (at) linux.org
Advertising: banners (at) linux.org
Copyright Linux Documentation Project.
Compilation ©1994-2008 Linux Online, Inc.
All rights reserved.